EHX - Wiggler [schematic]
- devastator
- Cap Cooler
take off the black stuff (with screwdrive) , then you pull the tubes , softly , doing a litle movement form right to left. They come easily.
Anyway, I had to fix mine again. The wire of the weird dc jack was broken. I have , also, to put new led holder .
Why EHX stuff are so crappy ?
Anyway, I had to fix mine again. The wire of the weird dc jack was broken. I have , also, to put new led holder .
Why EHX stuff are so crappy ?
Bumping an old thread. But anyone else try this mod to the rate knob to make it more usable? It's very sensitive and gets too fast in my opinion.
station wrote: Oh, and one improvement that I made (besides dropping the whole pedal in acid to etch the finish off ) was to to put a 100 ohm resistor between legs 1 and 2 of the rate knob. Made the usable range go from 8 o'clock to 3 instead of 8 - 10 or 11. A very easy mod that makes this pedal way more enjoyable to play.
- devastator
- Cap Cooler
changing the pot is the best option . I can try putting in // or serie a resistor but I gonna play also on the curve.
Mine was a real nightmare to set because of this pot and when I watched the "pulsar" vids that was the same kind of issues with its rate control (why EHX always does that ? )
Mine was a real nightmare to set because of this pot and when I watched the "pulsar" vids that was the same kind of issues with its rate control (why EHX always does that ? )
- Fredenando
- Breadboard Brother
- borislavgajic
- Opamp Operator
Information
- Posts: 1542
- Joined: 27 Feb 2008, 14:23
- Completed builds: ...script phase90,ETI phaser,Ross phaser,mutronC200,vox wah,WH10,FW-3,mutronIII,DrQuack,Penfoldautowah,Tubezipper,
Dipthonizer,seekwah,Talkingpedal,morleywha
...soulpreacher,dynacomp,compulator
...buzzaround,fuzzfactory,screwdriver,sho,superdouper,St-9,RogerMayer octavia,Tychobrahe octavia,paralelluniverse,string damper,slowgear
...CE-2,ibanez fL301,EH theCloneTheory
EHX bassmicrosynth,EHX EnglishMuffin,Tube Phaser,springtubereverb ,greyDOD,FulldriveII mosfet,OCD,VOX repeat percussion,RingStinger,Meatball,12stage phaser.... - Location: Sombor , Serbia
- Has thanked: 131 times
- Been thanked: 281 times
Thank you very much..........where did you get this schem? it was missing from that EH files....
Boris
Boris
- Fredenando
- Breadboard Brother
- borislavgajic
- Opamp Operator
Information
- Posts: 1542
- Joined: 27 Feb 2008, 14:23
- Completed builds: ...script phase90,ETI phaser,Ross phaser,mutronC200,vox wah,WH10,FW-3,mutronIII,DrQuack,Penfoldautowah,Tubezipper,
Dipthonizer,seekwah,Talkingpedal,morleywha
...soulpreacher,dynacomp,compulator
...buzzaround,fuzzfactory,screwdriver,sho,superdouper,St-9,RogerMayer octavia,Tychobrahe octavia,paralelluniverse,string damper,slowgear
...CE-2,ibanez fL301,EH theCloneTheory
EHX bassmicrosynth,EHX EnglishMuffin,Tube Phaser,springtubereverb ,greyDOD,FulldriveII mosfet,OCD,VOX repeat percussion,RingStinger,Meatball,12stage phaser.... - Location: Sombor , Serbia
- Has thanked: 131 times
- Been thanked: 281 times
Thanks for info!
Boris
Boris
Haha, Nah I meant literally taking the Valves and transformer out of the circuit/schematic altogether.devastator wrote:take off the black stuff (with screwdrive) , then you pull the tubes , softly , doing a litle movement form right to left. They come easily.
Anyway, I had to fix mine again. The wire of the weird dc jack was broken. I have , also, to put new led holder .
Why EHX stuff are so crappy ?
- borislavgajic
- Opamp Operator
Information
- Posts: 1542
- Joined: 27 Feb 2008, 14:23
- Completed builds: ...script phase90,ETI phaser,Ross phaser,mutronC200,vox wah,WH10,FW-3,mutronIII,DrQuack,Penfoldautowah,Tubezipper,
Dipthonizer,seekwah,Talkingpedal,morleywha
...soulpreacher,dynacomp,compulator
...buzzaround,fuzzfactory,screwdriver,sho,superdouper,St-9,RogerMayer octavia,Tychobrahe octavia,paralelluniverse,string damper,slowgear
...CE-2,ibanez fL301,EH theCloneTheory
EHX bassmicrosynth,EHX EnglishMuffin,Tube Phaser,springtubereverb ,greyDOD,FulldriveII mosfet,OCD,VOX repeat percussion,RingStinger,Meatball,12stage phaser.... - Location: Sombor , Serbia
- Has thanked: 131 times
- Been thanked: 281 times
you have mqany articles about that ....mostly simulating tube preamps with FET-s ....but why do that? point of this thread is to make TUBE Wiggler
cheers
Boris
cheers
Boris
- clintrubber
- Breadboard Brother
Information
FWIW, inside pic of the related/almost identical Nady TTV-2 added to this thread:
https://www.freestompboxes.org/viewtopic ... dy#p172566
https://www.freestompboxes.org/viewtopic ... dy#p172566
- clintrubber
- Breadboard Brother
Information
Anybody still has this file somewhere ? Seems to be gone from imageshack after all those years.Fredenando wrote:Here are a schematics for the Rev B version:
https://img37.imageshack.us/img37/6520/ ... icrevb.pdf
Thanks!
- modman
- a d m i n
Information
- Posts: 4897
- Joined: 19 Jun 2007, 16:57
- Has thanked: 4410 times
- Been thanked: 2139 times
I re-attached the schematic to the first post of the thread.
I did found Puretube recently necro-trolling (!) only to hear the schematics are shared by New Sensor these days...
I did found Puretube recently necro-trolling (!) only to hear the schematics are shared by New Sensor these days...
Please, support freestompboxes.org on Patreon for just 1 pcb per year! Or donate directly through PayPal
- modman
- a d m i n
Information
- Posts: 4897
- Joined: 19 Jun 2007, 16:57
- Has thanked: 4410 times
- Been thanked: 2139 times
I re-attached the schematic to the first post of the thread.
I did found Puretube recently necro-trolling (!) only to hear the schematics are shared by New Sensor these days...
https://music-electronics-forum.com/for ... schematics
I did found Puretube recently necro-trolling (!) only to hear the schematics are shared by New Sensor these days...
https://music-electronics-forum.com/for ... schematics
Please, support freestompboxes.org on Patreon for just 1 pcb per year! Or donate directly through PayPal