Behringer RV600 Reverb Machine: Bad -> Great mods.
- briggs
- Tube Twister
Information
I got this pedal yesterday nd while I like the masses of verb, unortunately it doesn't play nice with my other pedals.
There really seems to be an input impedance problem with the unit in and out.
Instead of a transistor buffer I think I'll try using a sub-miniature valve.
Thinking more on this, you could just build a buffered fx loop with blend control, right?
No need to hack the pedal itself that way.
Been a fan of la revolution deaux for a while now, keep it up
There really seems to be an input impedance problem with the unit in and out.
Instead of a transistor buffer I think I'll try using a sub-miniature valve.
Thinking more on this, you could just build a buffered fx loop with blend control, right?
No need to hack the pedal itself that way.
Been a fan of la revolution deaux for a while now, keep it up
Information
- Posts: 1
- Joined: 18 Aug 2010, 08:11
Hope someone is still reading this half a year later.
I'm planning a rehouse, but want to keep using the pedal until the housing is finished, and then do a quick changeover.
So does anyone have the pot values for me (and other rehousers).
Cheers
I'm planning a rehouse, but want to keep using the pedal until the housing is finished, and then do a quick changeover.
So does anyone have the pot values for me (and other rehousers).
Cheers
- oldgravity
- Solder Soldier
Information
- Posts: 161
- Joined: 25 Mar 2009, 06:37
- Location: New Orleans, LA
Would anybody who has one of these be willing to read the DSP chips' numbers and post them? Wondering what DSP they're using.
- JiM
- Diode Debunker
Information
- Posts: 967
- Joined: 11 Mar 2008, 22:56
- Completed builds: Completed builds :
Proco Rat
MXR MicroAmp in a volume pedal
TubeDriver (w/ NoS russian tube and big muff tone contol) + Phase 45 (w/ univibe cap ratio)
Dallas Rangemaster (w/ noisy OC75, negative ground)
SubCaster tube booster (w/ NoS russian tube, PtP)
Hot Harmonics
Music From Outer Space SubCommander in progress
Crackle Not OK
Simple bass blender in a 1590A
Bazz Fuss with a photo-darlington - Location: France
- Has thanked: 70 times
- Been thanked: 66 times
- Contact:
I don't know for sure, but it's supposed to be a copy of the Line6 ToneCore series, therefore using a Freescale DSP56364.oldgravity wrote:Would anybody who has one of these be willing to read the DSP chips' numbers and post them? Wondering what DSP they're using.
viewtopic.php?f=29&t=2074&start=20#p100203
Any gutshot to confirm this would be greatly appreciated.
I only give negative feedback.
Information
- Posts: 1
- Joined: 04 Feb 2011, 02:45
Would it be difficult to create a housing for 2 Behringer Echo Machines to become one massive pedal? Even if there are two 9V barrel jacks for each pedal, so they are semi-independant power wise yet interconnected internally?
Hi Briggs,briggs wrote:They are, plus by boosting the input right up with the preamp you can run the reverb at a fraction of the volume you needed to before - noise issues solved...
can you tell me the size of RV-600 PCB? I am planning to rehouse it on 1590N hammond casing (121mm x 66mm x 35 mm)
thanks...
In case of somebody new find this thread in need for help, the rv600 schematic is located in:
https://www.freestompboxes.org/viewtopic ... 10&t=24274
at the bottom of the page
Cheers,
Dave
PD: Thanks to modman
https://www.freestompboxes.org/viewtopic ... 10&t=24274
at the bottom of the page
Cheers,
Dave
PD: Thanks to modman