Page 1 of 1

FS: Aqua Puss clone PCBs (V1)

Posted: 18 Jul 2011, 19:00
by theehman
I have 6 pieces of the original version of the Aqua Puss delay PCB that was sold here at FSB. I ended up buying some of the revised PCBs before I got these loaded. I'd like to get $5 each plus $2 shipping in the US. Please email me at theehman AT gmail DOT com, do not PM.

The original thread: https://www.freestompboxes.org/viewtopic.php?f=7&t=4216

The boards will need a small jumper on the back. See this post here: https://www.freestompboxes.org/viewtopic ... 220#p54377

Board pics (courtesy of abfackeln)

Image

Image

Re: FS: Aqua Puss clone PCBs (V1)

Posted: 18 Jul 2011, 19:52
by LaceSensor
emailed.

Re: FS: Aqua Puss clone PCBs (V1)

Posted: 19 Jul 2011, 01:54
by theehman
5 left. Thanks, LaceSensor!!

Re: FS: Aqua Puss clone PCBs (V1)

Posted: 25 Jul 2011, 21:30
by BraindeadAudio
Just emailed you.

Re: FS: Aqua Puss clone PCBs (V1)

Posted: 26 Jul 2011, 14:07
by brentm
Doh, thread is hidden/gone. Are these etched or printed/layered boards?

Re: FS: Aqua Puss clone PCBs (V1)

Posted: 26 Jul 2011, 14:23
by theehman
brentm wrote:Doh, thread is hidden/gone. Are these etched or printed/layered boards?
Printed and layered.

Re: FS: Aqua Puss clone PCBs (V1)

Posted: 31 Aug 2011, 19:11
by theehman
2 boards left!!

Re: FS: Aqua Puss clone PCBs (V1)

Posted: 13 Sep 2011, 18:48
by theehman
All gone!! Thanks everybody!

Re: FS: Aqua Puss clone PCBs (V1)

Posted: 29 Aug 2016, 18:04
by joesatch
i got one of these boards. Unfortunately in the main thread, all the docs were hosted on a site that is now defunct. IF anyone has build/layout docs on this i would be much appreciative!

Re: FS: Aqua Puss clone PCBs (V1)

Posted: 08 May 2018, 21:36
by puppiesonacid
joesatch wrote:i got one of these boards. Unfortunately in the main thread, all the docs were hosted on a site that is now defunct. IF anyone has build/layout docs on this i would be much appreciative!
Same here.
If my memory serves me
Correct i think there was an error on the board and a trace needed ro be cut and jumped to correct.

Re: FS: Aqua Puss clone PCBs (V1)

Posted: 14 May 2018, 06:41
by jt
I built mine using these two files.

Re: FS: Aqua Puss clone PCBs (V1)

Posted: 14 May 2018, 15:35
by puppiesonacid
Perfect! Thank you : )