Electrolabs - Phaser

Discussion regarding early stompbox technology: 1960-1975 Please keep discussion focused and contribute what info you have...
Post Reply
User avatar
analogguru
Old Solderhand
Information
Posts: 3238
Joined: 26 Jun 2007, 13:58
Been thanked: 124 times
Contact:

Post by analogguru »

Ever wondered what is inside the Electrolabs module series ?
Here we go with the:

Electrolabs Phaser

Electrolabs Phaser guts

Electrolabs Phaser schematic from "jaytee"

Hmm.... looks a little bit "Colorsound-ish"....

WARNING:
The above schematic contains errors.
As you can see in the left upper corner of the gut shot there is a Siemens 1µF film capacitor connected between pin 8 and 9 of the Lm 348 used for the LFO.

Also the input stage looks a little bit suspicious. I assume that R1 should be lift off the -input of U1A and connected to U/2 and that C2 should not connect to R1/R5/C4 - instead of this also to U/2.

According to "jaytee" the unit contains 6 stages (only 2 stages drawn) and the transistor used as a LED-Driver is a BC149 (as can also be seen in the gut shot left upper corner).

analogguru
There´s a sucker born every minute - and too many of them end up in the bootweak pedal biz.

Post Reply