Page 1 of 1

Maestro PSFS-2 Footswitch Design?

Posted: 18 Jun 2017, 18:44
by pmkipp
Anyone ever tried to build one of these to work with the Maestro PS-1A Phaser? Would love to figure this out.

Re: Maestro PSFS-2 Footswitch Design?

Posted: 25 Aug 2017, 14:42
by pmkipp
I have been researching/working on this and may have something to try when I get some free time. I will post any results

Re: Maestro PSFS-2 Footswitch Design?

Posted: 28 Aug 2019, 17:01
by pmkipp
So, I did figure this out. But it is a pain to build, mostly because of the 6 wire connector required and having to build the plug from scratch. It works fine with my PS-1A - the Blue (Slow) switch has to be on.

Re: Maestro PSFS-2 Footswitch Design?

Posted: 28 Aug 2019, 18:44
by pmkipp
Update - there was actually a busted switch in my build. Replaced it, now it works perfectly - used with all the onboard rockers in OFF position. Little pop when turned on or off, so need to figure that out...