Hi
Does anyone know where I can get a schematic for a VOX Flanger model 1902 - I have one in for restoration - it has a SAD1024 chip and runs off two 9 volt batteries - the box is diecast in the shape of a large V
Any hel[p appreciated
bajaman
Vox - 1902 Flanger [schematic]
- bajaman
- Old Solderhand
Information
- Posts: 4549
- Joined: 26 Jun 2007, 21:18
- Location: New Brighton, Christchurch, NZ
- Has thanked: 596 times
- Been thanked: 2061 times
- Goop_buster
- Solder Soldier
Hey bajaman
Try this
http://www.voxamps.co.uk/downloads/circ ... 02flan.jpg
btw, does the PCB say Guyatone or PS-107?
btw#2 This thread is not OT
Try this
http://www.voxamps.co.uk/downloads/circ ... 02flan.jpg
btw, does the PCB say Guyatone or PS-107?
btw#2 This thread is not OT
- Attachments
-
- 1902flan.pdf
- (175.24 KiB) Downloaded 155 times
- bajaman
- Old Solderhand
Information
- Posts: 4549
- Joined: 26 Jun 2007, 21:18
- Location: New Brighton, Christchurch, NZ
- Has thanked: 596 times
- Been thanked: 2061 times
Hey - thanks Goop buster
The board is brown phenolic with no screen printing - the track side has a green lacquer coating and has only EPK-138 as a code number on it. The chips all have black felt pen over the type numbers - very easy to remove . I should be able to fix it now.
That Vox site is a gold mine
Many thanks
bajaman
The board is brown phenolic with no screen printing - the track side has a green lacquer coating and has only EPK-138 as a code number on it. The chips all have black felt pen over the type numbers - very easy to remove . I should be able to fix it now.
That Vox site is a gold mine
Many thanks
bajaman