Myths, Legends and the Mojo of the Dallas Rangemaster
- theyear2042
- Breadboard Brother
hey guys
was thinking about making a rangemaster clone. was thinking of an npn version with an oc144.
im trying to track down original versions of the schem as there seem to be a few floating around.
i saw this one on ebay https://cgi.ebay.com/ws/eBayISAPI.dll?V ... 0370497532 - but its unknown if original or drawn by the dude who owned it - seems to have a 5k resistor at the input instead of a 5nf cap and a 10k resistor at the output instead of a .01uf cap.
does anyone know of a page detailing changes to the rangemaster over the years?
can anyone comment on the d*a*m red booster - i saw a layout on this forum which uses a (100kb pot and a 2.2uf in series) in parallel with the 5nf input cap with a 1m pull down resistor off the 100kb pot. is this a standard mod or did the dude from d*a*m come up with this?
does anyone know of a web page detailing various mods for the rangemaster?
thanks guys
2042
was thinking about making a rangemaster clone. was thinking of an npn version with an oc144.
im trying to track down original versions of the schem as there seem to be a few floating around.
i saw this one on ebay https://cgi.ebay.com/ws/eBayISAPI.dll?V ... 0370497532 - but its unknown if original or drawn by the dude who owned it - seems to have a 5k resistor at the input instead of a 5nf cap and a 10k resistor at the output instead of a .01uf cap.
does anyone know of a page detailing changes to the rangemaster over the years?
can anyone comment on the d*a*m red booster - i saw a layout on this forum which uses a (100kb pot and a 2.2uf in series) in parallel with the 5nf input cap with a 1m pull down resistor off the 100kb pot. is this a standard mod or did the dude from d*a*m come up with this?
does anyone know of a web page detailing various mods for the rangemaster?
thanks guys
2042
- Electric Warrior
- Diode Debunker
It's quite obvious that it's not a factory schematic. Whoever drew it misidentified the caps for resistors - guess why
There's basically two versions: The early ones have an OC71, 0.0082 Siemens styroflex cap at the output, a brown Hunts cap at the input and two 50µF Electrolytics. The later OC44 version has 25µF Electrolytics (though some come with mixed 50/25 values - 50µF is always at the bottom of the terminal strip afaik) and tubular ceramic caps of the usual values.
The emitter resistor varies a bit, as it was used to set the bias. Most have 3k9. I have photos of some with 4k7 and 3k7.
The pot was usually audio taper, though there are some with linear taper. A few might have come with a 20k pot, but I'm not entirely sure about that.
There's basically two versions: The early ones have an OC71, 0.0082 Siemens styroflex cap at the output, a brown Hunts cap at the input and two 50µF Electrolytics. The later OC44 version has 25µF Electrolytics (though some come with mixed 50/25 values - 50µF is always at the bottom of the terminal strip afaik) and tubular ceramic caps of the usual values.
The emitter resistor varies a bit, as it was used to set the bias. Most have 3k9. I have photos of some with 4k7 and 3k7.
The pot was usually audio taper, though there are some with linear taper. A few might have come with a 20k pot, but I'm not entirely sure about that.
- RnFR
- Old Solderhand
Information
merged with our already extensive rangemaster thread.
"You've converted me to Cubic thinking. Where do I sign up for the newsletter? I need to learn more about how I can break free from ONEism Death Math." - Soulsonic
Blog-APOCALYPSE AUDIO
Blog-APOCALYPSE AUDIO
- theyear2042
- Breadboard Brother
yeah i didnt bother trying to reverse engineer the pics on that ebay auction. i was hoping someone had already done all the hard work and documented the history of the rangemaster versions with proper schematics.
obviously that is not a factory schematic, but it could have been an accurate drawing of an early/prototype model - looking at those caps its easy so see why he presumed they were 5 / 10k resistors - in a momentary lapse of rushed judgement i thought the extortionate price tag might mean it was a rare early model.. lol
it appears not..
can anyone help me out with the following?:
verified 65 amps colour booster schematic
verified d*a*m red rooster schematic
verified analog man beano boost schematic
cheers
2042
obviously that is not a factory schematic, but it could have been an accurate drawing of an early/prototype model - looking at those caps its easy so see why he presumed they were 5 / 10k resistors - in a momentary lapse of rushed judgement i thought the extortionate price tag might mean it was a rare early model.. lol
it appears not..
can anyone help me out with the following?:
verified 65 amps colour booster schematic
verified d*a*m red rooster schematic
verified analog man beano boost schematic
cheers
2042
- soulsonic
- Old Solderhand
Information
As far as I'm concerned, R.G. Keen's excellent article on the Rangemaster pretty much gives all the info needed:
http://www.geofex.com/Article_Folders/R ... tboost.pdf
The article is based on actual units he traced. You can see them here:
http://www.geofex.com/Article_Folders/R ... er/drm.htm
The Analogman Beano Boost appears to be just a standard Rangemaster with switchable input caps, and it uses an "NKT275" instead of an OC44/OC71. The terminal strip layout certainly follows the layout in R.G.'s article very closely, though you could argue that it's just following the terminal strip layout from the original unit.
I don't know anything about the 65 Amps Color Boost other than that my Rangemaster trounced it in a Treble Booster Shootout done by Brett Kingman.
My Rangemaster is the stock circuit except it's being powered by a charge pump voltage inverter.
http://www.geofex.com/Article_Folders/R ... tboost.pdf
The article is based on actual units he traced. You can see them here:
http://www.geofex.com/Article_Folders/R ... er/drm.htm
The Analogman Beano Boost appears to be just a standard Rangemaster with switchable input caps, and it uses an "NKT275" instead of an OC44/OC71. The terminal strip layout certainly follows the layout in R.G.'s article very closely, though you could argue that it's just following the terminal strip layout from the original unit.
I don't know anything about the 65 Amps Color Boost other than that my Rangemaster trounced it in a Treble Booster Shootout done by Brett Kingman.
My Rangemaster is the stock circuit except it's being powered by a charge pump voltage inverter.
"Analog electronics in music is dead. Analog effects pedal design is a dead art." - Fran
- DougH
- Transistor Tuner
I suspect most of the boutiquer's got their info from R.G.'s article. You really didn't see many RM boutique clones until R.G. posted his article.
"You have just tubescreamered or fuzzfaced yourself " -polarbearfx
- graemey
- Breadboard Brother
I just built one at the weekend using the RG info.DougH wrote:I suspect most of the boutiquer's got their info from R.G.'s article. You really didn't see many RM boutique clones until R.G. posted his article.
I thought I would try a good old AC128 which I selected using my component analyzer, about hef100, low leakage.
I biased it with a couple of trimmers (100k and 10k) as per the RG write-up and... WOW, what a sound!
This thing sounds GREAT. No need for hard to find Mullard transistors etc, just a decent PNP germanium and it cooks!
Sounds fantastic through my Marshall Vintage Modern, Im chuffed!
- soulsonic
- Old Solderhand
Information
YES! I've made Rangemasters with all kinds of germaniums and as long as it's not too hissy it will sound great. I made my first one with an AC128 as well. I think they're a good choice, especially if you want a hot one.graemey wrote: This thing sounds GREAT. No need for hard to find Mullard transistors etc, just a decent PNP germanium and it cooks!
Sounds fantastic through my Marshall Vintage Modern, Im chuffed!
"Analog electronics in music is dead. Analog effects pedal design is a dead art." - Fran
Information
- Posts: 39
- Joined: 21 Apr 2009, 03:22
- my favorite amplifier: Homemade 18 Watt w/ 2xEL84 and tremolo.
- Completed builds: Big Muff Pi (mostly violet Ram's head with my own bias and impedence mods)
OCD, BYOC OD-2, GGG Tube Screamer, Red Llama, Dallas Rangemaster, Fuzz Face, SHO, Valvecaster, Bajaman's CX-3, ROG 22/7, ROG Professor Tweed, ROG Tri-Vibe, MXR Dynacomp, Mxr Phase 45, Proco Rat (with clippping mods), EA Tremolo, PT 80 Delay so many more... - Location: Austin TX
+1 on the AC128. I had a few lying around, so I made up a terminal strip layout based on the rangeblaster at fuzzcentral. The thing sounds great!
- DougH
- Transistor Tuner
First one I built with an AC188 which sounded a little better than the AC128's I had. Last one I did was with an NPN Mullard and different bias point, so it sounds different. Different Ge transistors will produce different sounds but they are not dramatic differences. This is a favorite pedal of mine and I'd build it with whatever I had on hand or could easily obtain. It's pretty hard to screw it up.
"You have just tubescreamered or fuzzfaced yourself " -polarbearfx
Recently built a rangemaster from a supposed re rangemaster,I cant recall were I found the article but it was on a turret strip and was hand drawn. if interested I can find the source.I used a mullard oc45 out of a set I purchased from ebay a couple years ago. Wow sounded great right into my marshall dsl 2000.Only through the classic or green channel,Had that cocked wha-wha sound but it creamed the tone up alot. before if I ran my strat into that channel it had some ice pick in your ear lead tones.But with the rangemaster clone I built these were gone.If I turn my volume down on my guitar it cleans up nice and all I have to do is turn up for alot more saturated leads.It may sound strange but really nailed the Hendrix tone for a live recording I have of Red house with him and johnny Winters.I feel alot of the tone has too do with the mullard transistors.I tried some other pnp transistors because I have heard Oc45s dont have the same gain as oc44s,and that was what I was looking for but I kept going back to the 45 it just seemed to have more complex musical quality.
Tee hee. There was exactly one.DougH wrote:I suspect most of the boutiquer's got their info from R.G.'s article. You really didn't see many RM boutique clones until R.G. posted his article.
And when he caught me searching for a unit to reverse engineer, he threatened me, in a public forum, with having his cousin in the CIA make my life hell. Seems he wanted to be the only one who made a rangemaster clone. It's one of those moments that sticks with you.
I have copies of that exchange somewhere on the backup disks.
- RnFR
- Old Solderhand
Information
R.G. wrote: ...with having his cousin in the CIA make my life hell.
holy shit, talk about freaky conspiracy theories, that's one for the books! not to mention the misappropriation of gov't resources! what a crazy story. next we are going to hear about the how JFK was killed by the bootweek mafia because he was going to leak the Fuzz Face schematic!
"You've converted me to Cubic thinking. Where do I sign up for the newsletter? I need to learn more about how I can break free from ONEism Death Math." - Soulsonic
Blog-APOCALYPSE AUDIO
Blog-APOCALYPSE AUDIO
- theehman
- Diode Debunker
Information
I seem to recall his initials being D.B. I was the one that sent you the schematic I drew from one of his units.R.G. wrote:Tee hee. There was exactly one.DougH wrote:I suspect most of the boutiquer's got their info from R.G.'s article. You really didn't see many RM boutique clones until R.G. posted his article.
And when he caught me searching for a unit to reverse engineer, he threatened me, in a public forum, with having his cousin in the CIA make my life hell. Seems he wanted to be the only one who made a rangemaster clone. It's one of those moments that sticks with you.
I have copies of that exchange somewhere on the backup disks.
The whole thing started when a friend of mine bought one of his units and sent it to me to RE. After I did so I built 10 units for him to give as gifts and started selling them through RonSound.
Ron Neely II
Electro-Harmonix info: http://electroharmonix.vintageusaguitars.com
Home of RonSound effects: http://www.ronsound.com
fx schematics and repairs
Electro-Harmonix info: http://electroharmonix.vintageusaguitars.com
Home of RonSound effects: http://www.ronsound.com
fx schematics and repairs
- Greg
- Old Solderhand
Wow, that's unbelievable..
Come on guys.. who's D.B. and is he still in the industry ?
Come on guys.. who's D.B. and is he still in the industry ?
culturejam wrote: We are equal opportunity exposure artists.
- DaveKerr
- Solder Soldier
Information
- Posts: 197
- Joined: 14 Mar 2010, 05:00
- my favorite amplifier: Ampeg M-15
Dynacord Preference 500 - Completed builds: Fuzz Face (2)
Tonebender MKII (3)
ROG Tri-Vibe
PAiA Ring Mod kit
Ring Mod based on Tim E schematic (2)
Rangemaster
CNO
ROG Splitter-Blender
Clari (Not) cubed deluxe - Location: Boston MA area
- Has thanked: 53 times
- Been thanked: 10 times
... multiple LFO waveforms (saw up, saw down, triangle, square); a more flexible envelope with attack/release controls as well as inverted envelope. I am afraid it will have more knobs than the TGP annual convention - frequencycentral
- DougH
- Transistor Tuner
R.G. wrote:Tee hee. There was exactly one.DougH wrote:I suspect most of the boutiquer's got their info from R.G.'s article. You really didn't see many RM boutique clones until R.G. posted his article.
And when he caught me searching for a unit to reverse engineer, he threatened me, in a public forum, with having his cousin in the CIA make my life hell. Seems he wanted to be the only one who made a rangemaster clone. It's one of those moments that sticks with you.
I have copies of that exchange somewhere on the backup disks.
Yeah R.G., I remember hearing you tell the story years ago. As funny now as it was back then.
<Kramer voice ON> It's an internet stompbox *classic*, Jerry!!!! <Kramer voice OFF>
"You have just tubescreamered or fuzzfaced yourself " -polarbearfx