S. Hawk Ltd. - Hawk II Tonal Expander [schematic]
- spaceace76
- Breadboard Brother
found this on the other forum, don't how accurate it is though
- spaceace76
- Breadboard Brother
the original circuit ran off 18v, using two 9v batteries
https://www.diystompboxes.com/smfforum/ ... ic=28578.0
https://www.diystompboxes.com/smfforum/ ... ic=28578.0
- spaceace76
- Breadboard Brother
The layout I posted is missing many components, so unless we get better photos we're a bit dead in the water here.
I also emailed Flynn amps about sharing a schematic of Rory's Hawk, and they politely declined. He seemed willing to post one himself once they recoup the costs of producing the pedal, but that may not be for a while.
Anyone have better photos we can use?
I also emailed Flynn amps about sharing a schematic of Rory's Hawk, and they politely declined. He seemed willing to post one himself once they recoup the costs of producing the pedal, but that may not be for a while.
Anyone have better photos we can use?
- analogguru
- Old Solderhand
Information
You "only" have to find out the exact center frequencies of the EQ (to calculate the value of inductors), the rest is already done.
analogguru
analogguru
There´s a sucker born every minute - and too many of them end up in the bootweak pedal biz.
- borislavgajic
- Opamp Operator
Information
- Posts: 1542
- Joined: 27 Feb 2008, 14:23
- Completed builds: ...script phase90,ETI phaser,Ross phaser,mutronC200,vox wah,WH10,FW-3,mutronIII,DrQuack,Penfoldautowah,Tubezipper,
Dipthonizer,seekwah,Talkingpedal,morleywha
...soulpreacher,dynacomp,compulator
...buzzaround,fuzzfactory,screwdriver,sho,superdouper,St-9,RogerMayer octavia,Tychobrahe octavia,paralelluniverse,string damper,slowgear
...CE-2,ibanez fL301,EH theCloneTheory
EHX bassmicrosynth,EHX EnglishMuffin,Tube Phaser,springtubereverb ,greyDOD,FulldriveII mosfet,OCD,VOX repeat percussion,RingStinger,Meatball,12stage phaser.... - Location: Sombor , Serbia
- Has thanked: 131 times
- Been thanked: 281 times
Price: £1,000.00
- spaceace76
- Breadboard Brother
contacted the seller, said he'd send me the shots tomorrow (but i'm not holding my breath...)JshDnls wrote:Perhaps this bloke on eBay is willing to take a couple more pics.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0530135157
- spaceace76
- Breadboard Brother
the seller asked if i was actually interested in buying the pedal and being the honest guy i am, i told him i was only looking for a gutshot. anyone else have any ideas?
- DavidRavenMoon
- Breadboard Brother
Information
I used to own one of these back in the 70's. You attached it to your guitar strap. It was so noisy as to be unusable. That's why someone gave it to me! They had bought it new. They were not highly regarded at the time.
- Greg
- Old Solderhand
I think you're talking about another effect.. these are a floor box.DavidRavenMoon wrote:I used to own one of these back in the 70's. You attached it to your guitar strap. It was so noisy as to be unusable. That's why someone gave it to me! They had bought it new. They were not highly regarded at the time.
- Attachments
-
- hawkIItonalexpander.jpg (21.01 KiB) Viewed 4062 times
culturejam wrote: We are equal opportunity exposure artists.
- Dan N
- Resistor Ronker
My two slider was only about 4" X 3". Hanging it off a strap makes sense. You could thread a strap under the leather back protecter patch.
Dick joke has expired.
- Greg
- Old Solderhand
Was it like this one ?Dan N wrote:My two slider was only about 4" X 3". Hanging it off a strap makes sense. You could thread a strap under the leather back protecter patch.
http://www.effectsdatabase.com/model/shawk/hawk/3
It looks like the same size as the 3 slider... not something I'd want hanging on my strap..
culturejam wrote: We are equal opportunity exposure artists.
- Grendahl
- Solder Soldier
Information
analogguru wrote:You "only" have to find out the exact center frequencies of the EQ (to calculate the value of inductors), the rest is already done.
analogguru
Per RG on a certain DIY site:
Not sure if that helps out or not?R.G. wrote: First opamp stage is gain of 0.8db (essentially unity), switchable gains of 14 and 24db with the two switches, which are cumulative.
Treble rolloff starts at 2.6kHz (1.5K and 0.047) and feeds a two-hump resonant EQ, with humps/notches centered at 110Hz and 220Hz.
Resistance is futile...
( if < 1 ohm )
( if < 1 ohm )
- analogguru
- Old Solderhand
Information
No it doesn´t, because this information is probably based on my unfinished schematic with wrong inductor values. These two center frequencies don´t make any sense.Grendahl wrote:analogguru wrote:You "only" have to find out the exact center frequencies of the EQ (to calculate the value of inductors), the rest is already done.
analogguru
Per RG on a certain DIY site:Not sure if that helps out or not?R.G. wrote: First opamp stage is gain of 0.8db (essentially unity), switchable gains of 14 and 24db with the two switches, which are cumulative.
Treble rolloff starts at 2.6kHz (1.5K and 0.047) and feeds a two-hump resonant EQ, with humps/notches centered at 110Hz and 220Hz.
anubix
There´s a sucker born every minute - and too many of them end up in the bootweak pedal biz.
Information
- Posts: 13
- Joined: 07 Feb 2010, 13:09
- Completed builds: Ragemaster with AC126 and capacitor switch
LPB-1 with lower values, but not a screaming bird.
SHO with some changes on cap values.
Fuzz Face with 2n2222a and 2n3440, and bias control
Some other atempts, but any of them really pleased me. - Location: Brasil
- Has thanked: 11 times
boy, I wanted one
If al least we had some good pictures to se all the tracks and components
It seems to be a really transparent booster, but really loud.
that univox impersonator sounded too weak on youtube.
If al least we had some good pictures to se all the tracks and components
It seems to be a really transparent booster, but really loud.
that univox impersonator sounded too weak on youtube.
- ryanuk
- Solder Soldier
Slightly OT, but whats the deal with the booster anyway?Octopus1992 wrote:boy, I wanted one
If al least we had some good pictures to se all the tracks and components
It seems to be a really transparent booster, but really loud.
that univox impersonator sounded too weak on youtube.
If youre after a good transparent LOUD boost then there's sooo many other projects you could use to get the same effect?
I note the use of LRC - does this make the circuit particularly resonant? Is this what all the hype centres around?
- Steven_M
- Resistor Ronker
But this one is mysterious and rare!ryanuk wrote:Slightly OT, but whats the deal with the booster anyway?Octopus1992 wrote:boy, I wanted one
If al least we had some good pictures to se all the tracks and components
It seems to be a really transparent booster, but really loud.
that univox impersonator sounded too weak on youtube.
If youre after a good transparent LOUD boost then there's sooo many other projects you could use to get the same effect?
- spaceace76
- Breadboard Brother
that's the only reason I'm hereSteven_M wrote:But this one is mysterious and rare!ryanuk wrote:Slightly OT, but whats the deal with the booster anyway?Octopus1992 wrote:boy, I wanted one
If al least we had some good pictures to se all the tracks and components
It seems to be a really transparent booster, but really loud.
that univox impersonator sounded too weak on youtube.
If youre after a good transparent LOUD boost then there's sooo many other projects you could use to get the same effect?
but really, Rory got a great tone on Calling Card. and not that I'm trying to cop his sound or anything, but I like studying what my favorite players use. Figuring out what they did and why is really helpful for finding my own sound. When I found out this circuit was what Rory used (and NOT a Rangemaster) on that album, and that the pedal has never been traced, it piqued my interest. Others here may think the same thing.
- borislavgajic
- Opamp Operator
Information
- Posts: 1542
- Joined: 27 Feb 2008, 14:23
- Completed builds: ...script phase90,ETI phaser,Ross phaser,mutronC200,vox wah,WH10,FW-3,mutronIII,DrQuack,Penfoldautowah,Tubezipper,
Dipthonizer,seekwah,Talkingpedal,morleywha
...soulpreacher,dynacomp,compulator
...buzzaround,fuzzfactory,screwdriver,sho,superdouper,St-9,RogerMayer octavia,Tychobrahe octavia,paralelluniverse,string damper,slowgear
...CE-2,ibanez fL301,EH theCloneTheory
EHX bassmicrosynth,EHX EnglishMuffin,Tube Phaser,springtubereverb ,greyDOD,FulldriveII mosfet,OCD,VOX repeat percussion,RingStinger,Meatball,12stage phaser.... - Location: Sombor , Serbia
- Has thanked: 131 times
- Been thanked: 281 times
narafski.....naturally
Boris
Boris