Systech - Harmonic Energizer  [schematic]

Discussion regarding early stompbox technology: 1960-1975 Please keep discussion focused and contribute what info you have...
User avatar
bajaman
Old Solderhand
Information
Posts: 4549
Joined: 26 Jun 2007, 21:18
Location: New Brighton, Christchurch, NZ
Has thanked: 595 times
Been thanked: 2058 times

Post by bajaman »

Hello rwalborn - great to here from the designer of this and ther Systech pedals - welcome to the forum :thumbsup .
cheers
bajaman
be kind to all animals - especially human beings

User avatar
SpencerPedals
Solder Soldier
Information
Posts: 229
Joined: 23 Jan 2009, 21:56
Been thanked: 10 times

Post by SpencerPedals »

Finally built this a few weeks ago using PurplePeopleEater's pcb. It's confirmed. I used a J201 for the FET. It's a cool little circuit for adding color of various types. Very vintagy tones available from this thing. It is noisy if you turn up the gain, but if you keep it down, you're set. I'm a fuzz guy, but I still enjoy this thing and the tones you get when using it clean.

User avatar
devastator
Cap Cooler
Information
Posts: 675
Joined: 19 Jul 2008, 16:00
Location: France
Has thanked: 8 times
Been thanked: 22 times

Post by devastator »

There's one to sell in a french shop , 360euros I believe . (maybe a useless information but maybe someone here wants an original, I can find again the link by the way)

User avatar
joegore
Breadboard Brother
Information
Posts: 128
Joined: 01 Dec 2008, 23:04
my favorite amplifier: Little ones
Location: San Francisco
Been thanked: 8 times
Contact:

Post by joegore »

So a year after starting this thread, I FINALLY build one based on Purple People Eater's Layout posted earlier in this thread. It turned out GREAT — nicer than the original unit, actually. Got me sort of excited about using this filter again. A few post-build observations:

1. 90% of the fun happens with the gain and resonance at maximum settings. If I made another, I'd consider fixing these at their maximum value, omitting controls, and just having a single pot with an Option Knob ([url]http://www.optionknob.com)[/url].

2. I lazily replaced the 5K1 and 510R resistors with the more common 4K7 and 470 values. Works fine.

2. It's super-noisy — and how could it not be, with so much frequency-dependent boost?

3. It's super-ugly-sounding — but it reminds me of why I liked to use it 10 years ago. The sizzling filter peaks will slice through ANY mix. Great for tweaky overdubbed parts.

Thanks to everyone who made this happen. Here's a link to my very revealing audio demo: http://files.me.com/joegore/nugr5a.mp3

xoJ

User avatar
Brink
Degoop Doctor
Information
Posts: 302
Joined: 11 Jul 2009, 20:22
Location: NY
Has thanked: 3 times
Been thanked: 18 times

Post by Brink »

Does anyone have Torchy's vero for this?

User avatar
TELEFUNKENUSA
Information
Posts: 1
Joined: 09 Feb 2011, 10:59

Post by TELEFUNKENUSA »

Hello, My name is Toni Fishman. I'm the CEO at Telefunken Elektroakustik. I have an interest in reproducing the Systec Harmonic Energizer & producing a new line of effects for Telefunken.... Here is my back story regarding Frank & Dweezil.
I'm looking to reproduce and re market vintage effects and would like your help and I'm willing to discuss the hire of an expert design team to get the job done...


Telefunken | USA™ Completes Restoration of Zappa Microphone Collection
Rare Systec Harmonic Energizer Now on Tour With Dweezil

Los Angeles, CA, June, 2007 — The restoration of Frank Zappa's vintage mic collection, begun in 2005, is now complete. The project began with a visit and evaluation by Telefunken | USA CEO Toni Fishman and was completed by Charlie Bolois, the company's West Coast service specialist. Zappa also took possession of a new Telefunken | USA U47, one of a new line of microphones which faithfully recreate the legendary vintage Telefunken sound.

Toni Fishman explained, "Frank Zappa had assembled a very original and complete collection of extremely rare and valuable German and Austrian microphones, unused since his death. We dismantled and carefully evaluated the condition of the mics, performed numerous minor repairs, replaced some of the tubes with NOS (New Old Stock) tubes, and then worked on mic systems integration by matching up the correct power supplies and cables.

"We went through three Telefunken U47s, four Neumann M49s, a beautiful matched pair of Neumann M50s, circa 1950, and four AKG C24s, circa 1960. We also worked on an AKG C-12A that was missing a cable and power supply and rebuilt a custom Telefunken Ela M251 using the existing capsule. It was an impressive collection, but if microphones are unused they tend to deteriorate, so we've given them a renewed life and got them up and running for Dweezil's upcoming projects."

In the second phase of the project, Zappa met with Toni Fishman and Charlie Bolois to evaluate the remaining mics and other Zappa gear. Bolois concentrated on two U67s, nicknamed "The Champ" and "Schneider" by Frank Zappa. "Neither had a power supply," explained Bolois. "First I worked with a number of Zappa cables with various problems and made two good working cables with swivel mounts. Toni Fishman provided two custom power supplies which I adjusted to the correct voltages specifically for each mic. I also replaced the tubes in both, using NOS selected for low noise and low microphonics. A third mic, a vintage M49, required repair of the original Neumann power supply, various tune-ups and a capsule replacement."

After the restoration of the microphone collection, Dweezil unearthed various family treasures, including the rare Systec Harmonic Energizer guitar pedal. Bolois restored the unit to working order and Dweezil identified it as one used by Frank in the 1970s "Roxy and Elsewhere" album period. He has incorporated it in his current "Zappa Plays Zappa" concert tour.

"There is just nothing like it, and it's definitely a treat to have this for our performances of Frank's music." It is hoped that Telefunken | USA will be able to reverse engineer and recreate the unit, as they have done with numerous vintage microphones of the past.

Among other treasures pulled out of storage is "some form of a compressor," explained Bolois. "It's definitely hand made. Somebody adapted a compressor/limiter circuit board that utilized a Telefunken device. Once we figure out what it is and get it working, we'll hear what it sounds like and take it from there..."

For more information on Dweezil Zappa and the Zappa Plays Zappa project, please visit http://www.zappa.com.


Please contact me at 860 306 8080 mobile or 860 882-5919 office / studio








http://www.telefunken-elektroakustik.co ... ration.php

User avatar
hbo
Breadboard Brother
Information
Posts: 97
Joined: 10 Apr 2009, 16:46
Location: Oslo, Norway
Has thanked: 28 times
Been thanked: 196 times
Contact:

Post by hbo »

I see Torchy's vero layout s missing. Here's one I did a while ago, verified and all.

Image

User avatar
RnFR
Old Solderhand
Information
Posts: 4879
Joined: 09 Jan 2008, 06:02
my favorite amplifier: Traynor YBA-III, Fender Super Six
Completed builds: custom fuzz.
Location: Inner Earth
Has thanked: 139 times
Been thanked: 133 times
Contact:

Post by RnFR »

TELEFUNKENUSA wrote:Hello, My name is Toni Fishman. I'm the CEO at Telefunken Elektroakustik. I have an interest in reproducing the Systec Harmonic Energizer & producing a new line of effects for Telefunken.... Here is my back story regarding Frank & Dweezil.
I'm looking to reproduce and re market vintage effects and would like your help and I'm willing to discuss the hire of an expert design team to get the job done...


Telefunken | USA™ Completes Restoration of Zappa Microphone Collection
Rare Systec Harmonic Energizer Now on Tour With Dweezil

Los Angeles, CA, June, 2007 — The restoration of Frank Zappa's vintage mic collection, begun in 2005, is now complete. The project began with a visit and evaluation by Telefunken | USA CEO Toni Fishman and was completed by Charlie Bolois, the company's West Coast service specialist. Zappa also took possession of a new Telefunken | USA U47, one of a new line of microphones which faithfully recreate the legendary vintage Telefunken sound.

Toni Fishman explained, "Frank Zappa had assembled a very original and complete collection of extremely rare and valuable German and Austrian microphones, unused since his death. We dismantled and carefully evaluated the condition of the mics, performed numerous minor repairs, replaced some of the tubes with NOS (New Old Stock) tubes, and then worked on mic systems integration by matching up the correct power supplies and cables.

"We went through three Telefunken U47s, four Neumann M49s, a beautiful matched pair of Neumann M50s, circa 1950, and four AKG C24s, circa 1960. We also worked on an AKG C-12A that was missing a cable and power supply and rebuilt a custom Telefunken Ela M251 using the existing capsule. It was an impressive collection, but if microphones are unused they tend to deteriorate, so we've given them a renewed life and got them up and running for Dweezil's upcoming projects."

In the second phase of the project, Zappa met with Toni Fishman and Charlie Bolois to evaluate the remaining mics and other Zappa gear. Bolois concentrated on two U67s, nicknamed "The Champ" and "Schneider" by Frank Zappa. "Neither had a power supply," explained Bolois. "First I worked with a number of Zappa cables with various problems and made two good working cables with swivel mounts. Toni Fishman provided two custom power supplies which I adjusted to the correct voltages specifically for each mic. I also replaced the tubes in both, using NOS selected for low noise and low microphonics. A third mic, a vintage M49, required repair of the original Neumann power supply, various tune-ups and a capsule replacement."

After the restoration of the microphone collection, Dweezil unearthed various family treasures, including the rare Systec Harmonic Energizer guitar pedal. Bolois restored the unit to working order and Dweezil identified it as one used by Frank in the 1970s "Roxy and Elsewhere" album period. He has incorporated it in his current "Zappa Plays Zappa" concert tour.

"There is just nothing like it, and it's definitely a treat to have this for our performances of Frank's music." It is hoped that Telefunken | USA will be able to reverse engineer and recreate the unit, as they have done with numerous vintage microphones of the past.

Among other treasures pulled out of storage is "some form of a compressor," explained Bolois. "It's definitely hand made. Somebody adapted a compressor/limiter circuit board that utilized a Telefunken device. Once we figure out what it is and get it working, we'll hear what it sounds like and take it from there..."

For more information on Dweezil Zappa and the Zappa Plays Zappa project, please visit http://www.zappa.com.


Please contact me at 860 306 8080 mobile or 860 882-5919 office / studio








http://www.telefunken-elektroakustik.co ... ration.php
yeah, you are going to reverse this pedal? why? its obviously been done already. and you are very welcome, Mr. CEO. why don't you just take whatever money you were going to give your "expert design team" and split it among everybody that contributed to this thread? i made a couple schematics that were rife with errors. that's gotta be worth something. pm me - i'll tell you where to send the check.
"You've converted me to Cubic thinking. Where do I sign up for the newsletter? I need to learn more about how I can break free from ONEism Death Math." - Soulsonic

Blog-APOCALYPSE AUDIO

User avatar
PurplePeopleEater
Resistor Ronker
Information
Posts: 335
Joined: 28 Nov 2007, 01:58
Been thanked: 5 times

Post by PurplePeopleEater »

SpencerPedals wrote:Finally built this a few weeks ago using PurplePeopleEater's pcb. It's confirmed. I used a J201 for the FET. It's a cool little circuit for adding color of various types. Very vintagy tones available from this thing. It is noisy if you turn up the gain, but if you keep it down, you're set. I'm a fuzz guy, but I still enjoy this thing and the tones you get when using it clean.

joegore wrote:So a year after starting this thread, I FINALLY build one based on Purple People Eater's Layout posted earlier in this thread. It turned out GREAT — nicer than the original unit, actually. Got me sort of excited about using this filter again. A few post-build observations:

1. 90% of the fun happens with the gain and resonance at maximum settings. If I made another, I'd consider fixing these at their maximum value, omitting controls, and just having a single pot with an Option Knob ([url]http://www.optionknob.com)[/url].

2. I lazily replaced the 5K1 and 510R resistors with the more common 4K7 and 470 values. Works fine.

2. It's super-noisy — and how could it not be, with so much frequency-dependent boost?

3. It's super-ugly-sounding — but it reminds me of why I liked to use it 10 years ago. The sizzling filter peaks will slice through ANY mix. Great for tweaky overdubbed parts.

Thanks to everyone who made this happen. Here's a link to my very revealing audio demo: http://files.me.com/joegore/nugr5a.mp3

xoJ
I'm glad you guys were able to use the PCB layout !

:mrgreen:

User avatar
timhulio
Information
Posts: 34
Joined: 11 Nov 2008, 15:29
Location: London, UK
Has thanked: 2 times
Been thanked: 14 times

Post by timhulio »

Ooh, the Telefunken guy bought one of my Harmonic Energizer clones on ebay. True story.

Here's the layout I've done. It adds a few bits and bobs like a op amp buffer and fuzz circuit. I add an expression pedal in for the center freq control. Makes things much more fun. Uses two TL074s quads.
Image

Here's the DIY layout creator (java version) file:
muff_fuzz_energizer_17022011.diy

And a Youtube demo:

User avatar
timhulio
Information
Posts: 34
Joined: 11 Nov 2008, 15:29
Location: London, UK
Has thanked: 2 times
Been thanked: 14 times

Post by timhulio »

Ha. Here's the DIY layout creator (java version) file:
http://www.fredric.co.uk/misc/muff_fuzz ... 022011.diy

User avatar
JustinFun
Information
Posts: 42
Joined: 22 May 2010, 14:17
Has thanked: 8 times
Been thanked: 13 times

Post by JustinFun »

Just built this from purplepeopleeaters layout - I absolutely love it! It's amazingly flexible, you can dial in just the right 'cocked wah' sound, or narrow the frequencies for all sorts of bizarre octave up noises or synthy buzzes.

It's a quick PCB to populate - took me about an hour and a half including offboard wiring (haven't boxed it yet) Anyone pondering a build - go for it!

There's a slight typo on PPE's layout by the way - one of the box caps is labelled '47u' when it should be '47n'.

Now to trawl back through the thread and add the appropriate 'thanks' to all who helped...

User avatar
JOHNO
Cap Cooler
Information
Posts: 563
Joined: 21 Jun 2009, 07:13
Has thanked: 47 times
Been thanked: 53 times

Post by JOHNO »

I think this is going to be my next project. I'm going to use 3 TL072 op amps. But I'm thinking of using half the first op amp for the buffer stage and the other half as a voltage follower to supply V bias to the rest of the op amps. Can anyone think of any reason why this approach won't get me close to the original sound?

User avatar
JOHNO
Cap Cooler
Information
Posts: 563
Joined: 21 Jun 2009, 07:13
Has thanked: 47 times
Been thanked: 53 times

Post by JOHNO »

Like this.
Schem 1.png

User avatar
JOHNO
Cap Cooler
Information
Posts: 563
Joined: 21 Jun 2009, 07:13
Has thanked: 47 times
Been thanked: 53 times

Post by JOHNO »

I couldn't make the layout above fit on my board size so i stuck to the original design. Well almost. :thumbsup
Systech harmonic energizer.png

User avatar
JOHNO
Cap Cooler
Information
Posts: 563
Joined: 21 Jun 2009, 07:13
Has thanked: 47 times
Been thanked: 53 times

Post by JOHNO »

Sorry guys my last layout was wrong again and it was messy.
I have taken the liberty with this layout to change the op amps around a little, it just made the layout much easier to work with. It is based on Grizzlytones schem but now the input and gain sections are on IC1 and the rest of the circuit on the other op amp. I don't think this will cause any problems.
Systech harmonic energiser.png

User avatar
JOHNO
Cap Cooler
Information
Posts: 563
Joined: 21 Jun 2009, 07:13
Has thanked: 47 times
Been thanked: 53 times

Post by JOHNO »

This is the schem i used minus the input stage and power supply which is the same as the original schem.
Photo 2.jpg

User avatar
JOHNO
Cap Cooler
Information
Posts: 563
Joined: 21 Jun 2009, 07:13
Has thanked: 47 times
Been thanked: 53 times

Post by JOHNO »

Can anyone see anything wrong with my schem? Any reason it wouldn't work?

User avatar
JOHNO
Cap Cooler
Information
Posts: 563
Joined: 21 Jun 2009, 07:13
Has thanked: 47 times
Been thanked: 53 times

Post by JOHNO »

Ok got it, i put a trace cut in the wrong place. Took me half the day to find it. This is built and VERIFIED. If you like you can drop the transistor power filtering. Up to you i dont care. Sorry for cluttering up the thread with crap.
Systech harmonic energizer.png

User avatar
kaycee
Solder Soldier
Information
Posts: 158
Joined: 16 Mar 2008, 18:04
Has thanked: 27 times
Been thanked: 9 times

Post by kaycee »

My build of this one from Harold's layout on stripboard.

Image

Inside are a disgrace :oops: I had a play at putting it in a treadle, then boxed it and had a cold joint - smudged the transfer too! it was one of those builds :evil:

Image

looks greenish in the pics, is actually banana yellow! I've added on the Jen Double Sound Fuzz/wah Fuzz via the slide switch, wired so you can run it after the HE or on its own after the HE buffer. I like this circuit, but I think I need to work on it a bit more, its rather noisy - particularly through the fuzz which has a fixed gain, might put an input trim on that to dial it in better. Certainly on its own it can drive a fuzz very nicely.

Post Reply