A/DA - Final Phase  [schematic]

Discussion regarding early stompbox technology: 1960-1975 Please keep discussion focused and contribute what info you have...
User avatar
Pokfor
Information
Posts: 10
Joined: 08 Aug 2014, 06:04
my favorite amplifier: Rock Seasons
Location: Russia
Has thanked: 12 times
Been thanked: 15 times

Post by Pokfor »

Thanks for the info, I will try to adjust to these data.
Has received a range narrower than I did. Perhaps the use of phasers will be more comfortable.
I will write after the experiments.

User avatar
Pokfor
Information
Posts: 10
Joined: 08 Aug 2014, 06:04
my favorite amplifier: Rock Seasons
Location: Russia
Has thanked: 12 times
Been thanked: 15 times

Post by Pokfor »

Final VCO tuning frequency from 33kHz to 560kHz. For the convenience of replacing R82 (27k) on the 36k. Also replaced the C10 (1n) to 4n7.

User avatar
Yazoo55
Breadboard Brother
Information
Posts: 130
Joined: 27 Apr 2008, 11:35
Location: Morpeth, Northumberland, U.K.
Has thanked: 11 times
Been thanked: 27 times

Post by Yazoo55 »

I've just built this and I think I've managed to set the frequency range OK based on the advice here. Do you have any advice on how to set trimpot 1 connected to the intensity pot please?

Post Reply