Bogner Shiva schematic?

Tube or solid-state, this section goes to eleven!
User avatar
ech0es
Resistor Ronker
Information
Posts: 252
Joined: 30 Jun 2007, 13:51
Been thanked: 6 times

Post by ech0es »

JHS wrote:
JHS wrote:Is the Diezel tone stack you're talking about the one from this thread?
No.

To me this tone stack looks more like it was copied from an Engl amp. Same issue like the stack in a Marshall 2003/4. At high volume it will do nearly nothing to the tone, a bit mid scoop, not more.
this tonestack is from the diezel VH4, we found a schematic of the tonestack and the input

User avatar
TragicTravisty
Solder Soldier
Information
Posts: 188
Joined: 11 Aug 2008, 21:42

Post by TragicTravisty »

ech0es wrote:
JHS wrote:
JHS wrote:Is the Diezel tone stack you're talking about the one from this thread?
No.

To me this tone stack looks more like it was copied from an Engl amp. Same issue like the stack in a Marshall 2003/4. At high volume it will do nearly nothing to the tone, a bit mid scoop, not more.
this tonestack is from the diezel VH4, we found a schematic of the tonestack and the input
links/pics/details?

User avatar
ech0es
Resistor Ronker
Information
Posts: 252
Joined: 30 Jun 2007, 13:51
Been thanked: 6 times

Post by ech0es »

Informations about the diezel VH4, used for the conception of the DIEFET pedal from techniguitare.com
I tried to draw the tone stacks of the four channels.

Channel 1: typical Fender tone stack
Channel 2: 470pf treble cap, 22nf mid and bass caps, 39k slope resistor, 1nf cap from mid pot wiper to ground
Channel 3 and 4: 680pf treble cap, everything else like channel 2.
http://picasaweb.google.com/aliasbarrylyndon/Diezel#

http://www.megaupload.com/?d=9RZ8JEEK

User avatar
chromaticdeth87
Information
Posts: 46
Joined: 18 Aug 2008, 09:05
Been thanked: 1 time

Post by chromaticdeth87 »

holy crap! that had to suck staking all those turrets

User avatar
TragicTravisty
Solder Soldier
Information
Posts: 188
Joined: 11 Aug 2008, 21:42

Post by TragicTravisty »

worked this out on a tonestack calculater, the result for channel two is lots of high filtering, slight cut at 1khz (less than a fender), and a big bass boost at around 80 hz. thats without factoring in the cap from mid control to ground, and channel three has slightly more mids, and treble.

User avatar
paulrodga
Information
Posts: 1
Joined: 28 Jan 2009, 23:26

Post by paulrodga »

More about the Shiva schematic? What is the correct one?

User avatar
erigm
Information
Posts: 27
Joined: 11 Jan 2009, 19:16

Post by erigm »

chromaticdeth87 wrote:holy crap! that had to suck staking all those turrets
What turrets? I didn't see any. Did I miss something?
erigm

User avatar
luchomack
Information
Posts: 4
Joined: 02 Sep 2012, 14:10
Has thanked: 2 times
Been thanked: 6 times

Post by luchomack »

here...
Attachments
Bognor_shiva.pdf
(33.34 KiB) Downloaded 514 times

User avatar
luchomack
Information
Posts: 4
Joined: 02 Sep 2012, 14:10
Has thanked: 2 times
Been thanked: 6 times

Post by luchomack »

other. i need the shiva power supply schematic...
Attachments
Bogner Shiva.pdf
(222.2 KiB) Downloaded 451 times

User avatar
luchomack
Information
Posts: 4
Joined: 02 Sep 2012, 14:10
Has thanked: 2 times
Been thanked: 6 times

Post by luchomack »

preamp
Attachments
Shiva preamp.png

User avatar
Heph333
Information
Posts: 1
Joined: 25 Mar 2018, 04:45
Has thanked: 8 times

Post by Heph333 »

Sorry to resurrect an ancient thread, but what is up with that orphaned V1A tube?

User avatar
luchomack
Information
Posts: 4
Joined: 02 Sep 2012, 14:10
Has thanked: 2 times
Been thanked: 6 times

Post by luchomack »

v1a dont to use, its for other versions with circuit reverbs and others...

Post Reply