Need help with wiring

All frequent questions on switching: true or not true bypass, transistor-based or mechanical.
Post Reply
User avatar
Dominik1986
Information
Posts: 18
Joined: 10 Jul 2011, 07:33
Has thanked: 2 times

Post by Dominik1986 »

Hey guys,

I am fairly new here and got a question for you. I would like to wire two inputs to two different outputs and would like to switch between them with a 3PDT switch. Here's how I would do it:

I would wire it like an A/B selector but instead of one input I am using 2. I would wire the two inputs to the 3PDT switch as I would do it as if I have one input. Is this right?

Kind regards and many thanks,

Dominik

User avatar
Seiche
Old Solderhand
Information
Posts: 2526
Joined: 01 Nov 2010, 00:16
Location: Germany
Has thanked: 231 times
Been thanked: 189 times

Post by Seiche »

I don't know if that input thing would work or if you'd get hum, etc.

but assuming it does, you only need a SPST Switch like this
Image

middle would go to the inputs, left to one output and right to the other.

Post Reply