freestompboxes.org

I want to wire up a 3 loop selector that will work like this:

Button 1 selects loop 1 (for now ill jumper it for clean bypass)
Button 2 selects loop 2 (plexi rythm pedal)
Button 3 selects loop 3 (rockbox clone set to singing sustaining lead)

Only one loop will be able to be selected at a time. I want to use it to mimic a three channel amp configuration. I'll put a dirt pedal on loops 2 and 3. I will jump loop 1 for as a clean channel(or utilize it later), 2 will be a pedal set to dirty rythm, and 3 will be a pedal set to singing lead overdrive.

The idea is to push one button to select the desired tone instead of doing the on/off dance dance revolution on the pedalboard mid-song.

I've built and boxed up a few pedals on vero board but I'm not great with switching schemes like this.

Thanks in advance,

Ken

Does it have to be done with relays, or can this be achieved with switches alone?