help identify 3 pots

Ok, you got your soldering iron and nothing is going to hold you back, but you have no clue where to start or what to build. There were others before you with the same questions... read them first.

help identify 3 pots

Postby registracii » 17 Oct 2012, 19:11

Hi guys,
Iam trying to make really old phaser usable again, the pots are really bad and need replacement, but I am not sure what to buy.
They have on them D47kMA 0.25W for the depth and regeneration and DM22A 0.25W for the speed.
What pots should I use as replacement?

User avatar
Posts: 45
Joined: 08 May 2012, 11:13
Location: Ireland
Has thanked: 5 times
Have thanks: 0 time

Re: help identify 3 pots

Postby Duckman » 17 Oct 2012, 20:14

D47kMA = 47k Log. 50k will work, too.
DM22A = no k after the 22 but try 20k or 25k log

Can´t you measure with your DMM? Take them out and check value between lug 1 and lug 3. That will be more accurate, for sure.

For this message the author Duckman has received thanks:
registracii (17 Oct 2012, 20:44)
User avatar
Opamp Operator
Posts: 1521
Joined: 20 May 2009, 02:45
Has thanked: 369 times
Have thanks: 143 times

Return to Absolute Beginners

Who is online

Users browsing this forum: No registered users and 1 guest