Secretefx - Secret-1 STD overdrive [traced]
- modman
- a d m i n
Information
- Posts: 4898
- Joined: 19 Jun 2007, 16:57
- Has thanked: 4411 times
- Been thanked: 2139 times
Saw this a bit late -- still, YuGi got promoted to Degoop Doctor...
Please, support freestompboxes.org on Patreon for just 1 pcb per year! Or donate directly through PayPal
- Manfred
- Tube Twister
Information
- Posts: 1945
- Joined: 04 Apr 2009, 23:42
- Has thanked: 1675 times
- Been thanked: 1360 times
Here the PCB-Layout clone, I plan to convert it to a single side version.
- Manfred
- Tube Twister
Information
- Posts: 1945
- Joined: 04 Apr 2009, 23:42
- Has thanked: 1675 times
- Been thanked: 1360 times
Hi Frabbio,Single sided layout with pcb mount pots, board dimensions are 5.5x4.5 cm.
My suggestion for the opamp is the OP275.
ok, is already done.
Thanks for sharing.
- Manfred
- Tube Twister
Information
- Posts: 1945
- Joined: 04 Apr 2009, 23:42
- Has thanked: 1675 times
- Been thanked: 1360 times
O.k, If it harms the forum, then the Admin should delete my post.roseblood11 wrote:@Manfred: Publishing a cloned version of the original pcb layout is a copyright infringement
BTW, all drawn schematic found by tracing are copyright infringements too.
I just asked the Administrator to delete my post:
viewtopic.php?f=7&t=24020&start=20#p269820
- marshmellow
- Cap Cooler
No, they are not. It's your own artwork, you created it.Manfred wrote:BTW, all drawn schematic found by tracing are copyright infringements too.
viewtopic.php?f=7&t=24020&start=20#p269820
- modman
- a d m i n
Information
- Posts: 4898
- Joined: 19 Jun 2007, 16:57
- Has thanked: 4411 times
- Been thanked: 2139 times
Roseblood: who are you and what are you doing on this forum?roseblood11 wrote:@Manfred: Publishing a cloned version of the original pcb layout is a copyright infringement
Manfred wrote:O.k, If it harms the forum, then the Admin should delete my post.roseblood11 wrote:@Manfred: Publishing a cloned version of the original pcb layout is a copyright infringement
BTW, all drawn schematic found by tracing are copyright infringements too.
I just asked the Administrator to delete my post:
viewtopic.php?f=7&t=24020&start=20#p269820
And that's really all there is to it...marshmellow wrote:No, they are not. It's your own artwork, you created it.Manfred wrote:BTW, all drawn schematic found by tracing are copyright infringements too.
viewtopic.php?f=7&t=24020&start=20#p269820
EDIT:
I cannot think of any copyright issues that would matter. At least really none apply. I moved the forum from US servers which cost us about $95/year to a Swedish server which costs about 4 times as much. Hosted in the USA, Lance Keltner and Klon clown Finnegan could just send a mail to the hosting company simply stating that we were infringing copyright, without having to prove anything. In order to defend the forum against this false claims, I would have had to hire a US attorney to fight the complaint.
Right now the situation is the inverse: anybody who feels their copyright is infringed upon can file a complaint with the
Stockholm District court:
Scheelegatan 7, 112 28 Stockholm, Sweden
Please, support freestompboxes.org on Patreon for just 1 pcb per year! Or donate directly through PayPal
- plush
- Cap Cooler
Y5S is a simple LCL (inductor - capacitor - inductor) filter, made to tame high frequency power line noise (e.g. if used with poor switch-mode power supply).AAntonio wrote:what can I put in place of the Y5S filter?
It can substituted with two 0.5uH inductors in series with DC supply and 100p cap to ground between them (ref. schematic).
Or you can omit them, if you have clean and trusty power supply.
I find it a bit of overkill here.
- AAntonio
- Breadboard Brother
Thanks a lot for the answerplush wrote:Y5S is a simple LCL (inductor - capacitor - inductor) filter, made to tame high frequency power line noise (e.g. if used with poor switch-mode power supply).AAntonio wrote:what can I put in place of the Y5S filter?
It can substituted with two 0.5uH inductors in series with DC supply and 100p cap to ground between them (ref. schematic).
Or you can omit them, if you have clean and trusty power supply.
I find it a bit of overkill here.
[ Image ]
Is this okay? or just the link?
look at the photo
- Manfred
- Tube Twister
Information
- Posts: 1945
- Joined: 04 Apr 2009, 23:42
- Has thanked: 1675 times
- Been thanked: 1360 times
No, that's wrong, the vertical link would short the +9V terminal to ground, because the inductor got very low DC-resistance.Is this okay? or just the link? Look at the photo.
The horizontal link is ok.