Barber Electronics - LTD Overdrive  [traced]

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.

Barber Electronics - LTD Overdrive

Postby markm » 12 Aug 2007, 13:53

You do not have the required permissions to view the files attached to this post.
Join together with the "Banned"!
User avatar
markm
Diode Debunker
 
Posts: 787
Joined: 26 Jun 2007, 15:41
Location: U.S.A.
Has thanked: 0 time
Have thanks: 8 times

Postby JHS » 12 Aug 2007, 15:55

JHS
Cap Cooler
 
Posts: 484
Joined: 14 Jul 2007, 12:20
Has thanked: 0 time
Have thanks: 3 times

Postby markm » 12 Aug 2007, 16:00

That one's better than mine!
I have this thing in my possesion right now.
Is it a TS with no buffers?
Join together with the "Banned"!
User avatar
markm
Diode Debunker
 
Posts: 787
Joined: 26 Jun 2007, 15:41
Location: U.S.A.
Has thanked: 0 time
Have thanks: 8 times

Postby RLBJR65 » 12 Aug 2007, 16:02

Thats a sweet looking layout! Only Q, I wonder how the board is mounted? I don't see any screws or other hardware. Very strong connections to pots etc but I wouldn't depend on them to hold the board in place. Maybe they put double sided tape on the trace side? That would probably work well with those connections.

OT - it's kind of a funny coincidence; I have been thinking along those same lines lately. Put the connections closer to where the parts will be mounted. Been working on this layout for the Kay tremolo. It's not as nice but getting there.

http://img162.imageshack.us/my.php?imag ... olorp6.gif

Untested BTW and I'm not sure when or if I'll get around to building it.
User avatar
RLBJR65
Resistor Ronker
 
Posts: 281
Joined: 30 Jun 2007, 17:07
Location: USA
Has thanked: 0 time
Have thanks: 3 times

Postby JHS » 12 Aug 2007, 16:05

I have a full screen high resolution pic as well (app. 3Mb), but this compressed pic has 98% of the quality of the original but can be better handled.

Use IRFAN-View to remove the blue touch of the pic and add some contrast...

JHS
JHS
Cap Cooler
 
Posts: 484
Joined: 14 Jul 2007, 12:20
Has thanked: 0 time
Have thanks: 3 times

Postby invictus » 12 Aug 2007, 16:14

.


you got PM sir JHS! :)


/
"im the master of my fate, im the captain of my soul... " -invictus
User avatar
invictus
Breadboard Brother
 
Posts: 128
Joined: 29 Jun 2007, 08:55
Location: between 20Hz - 20,000Hz
Has thanked: 0 time
Have thanks: 1 time

Postby markm » 12 Aug 2007, 16:16

The board is taped into the enclosure with 3M double sided tape.
Join together with the "Banned"!
User avatar
markm
Diode Debunker
 
Posts: 787
Joined: 26 Jun 2007, 15:41
Location: U.S.A.
Has thanked: 0 time
Have thanks: 8 times

Postby analogguru » 12 Aug 2007, 16:34

The board is taped into the enclosure with 3M double sided tape.


I can´t believe it.

I have this thing in my possesion right now.


Hows about a picture of the other (solder) side ?
The pcb-layout is very similar to the DirectDrive.

analogguru
There´s a sucker born every minute - and too many of them end up in the bootweak pedal biz.
analogguru
Old Solderhand
 
Posts: 3285
Joined: 26 Jun 2007, 14:58
Has thanked: 0 time
Have thanks: 116 times

Postby markm » 12 Aug 2007, 16:39

analogguru wrote:
Hows about a picture of the other (solder) side ?
The pcb-layout is very similar to the DirectDrive.

analogguru


It would take some dis-mantling but, I'll do that.
Give me a bit of time.
Join together with the "Banned"!
User avatar
markm
Diode Debunker
 
Posts: 787
Joined: 26 Jun 2007, 15:41
Location: U.S.A.
Has thanked: 0 time
Have thanks: 8 times

Re: Barber Electronics - LTD Overdrive  [traced]

Postby modman » 22 Jul 2018, 21:06

"The whole point of diy is diy. It's not dsoiyathodtr - do some of it yourself and then have others do the rest" (paulc)

For this message the author modman has received thanks: 3
Deepfuzz69 (23 Jul 2018, 03:14), dv8r601 (03 Aug 2018, 00:18), Manfred (23 Jul 2018, 17:41)
User avatar
modman
a d m i n
 
Posts: 4301
Joined: 19 Jun 2007, 17:57
Has thanked: 3108 times
Have thanks: 549 times

Re: Barber Electronics - LTD Overdrive

Postby Deepfuzz69 » 23 Jul 2018, 03:13

Thanks :applause:
Deepfuzz69
 
Posts: 3
Joined: 13 Jun 2017, 04:25
Location: Stockton, Ca.
Has thanked: 1 time
Have thanks: 0 time


Return to Boutique Stompboxes dissected...

Who is online

Users browsing this forum: di-anno and 10 guests