Way Huge - Aqua-Puss [traced]
Information
There are only a couple of stages the dry signal passes through before the output. Turn the MIX all the way down, and then audio probe the outputs of 1) input buffer 2) pins 1 and 7 of the dual op-amp (TL072, or whatever you used). This should clue you into where the signal is dropping.
- LaceSensor
- Cap Cooler
Cool. Will do that tommorow. Its midnight here nowmadbean wrote:There are only a couple of stages the dry signal passes through before the output. Turn the MIX all the way down, and then audio probe the outputs of 1) input buffer 2) pins 1 and 7 of the dual op-amp (TL072, or whatever you used). This should clue you into where the signal is dropping.
I used an LF353 FWIW
- LaceSensor
- Cap Cooler
Fixed by replacing Q1. Thanks bean
- LaceSensor
- Cap Cooler
Sweet
- LaceSensor
- Cap Cooler
Just v1 = blue v2 = red, the v2 fixed 2 ground connections that you have to jumper. Otherwise identical.Seiche wrote:wow, neat build!
whats the difference between the two PCBs?
The red one I built has the modulation add on (copied with a few changes from Sabros design)
Information
Just came across this template in my files. Print at 300DPI to get the right dimensions.
- LaceSensor
- Cap Cooler
Thanks to Abfelkin who sent me his last couple boards.
Heres the first one done, for a good friend of mine.
Gutshots tommorow when I have light.
Heres the first one done, for a good friend of mine.
Gutshots tommorow when I have light.
Information
Just bought a Red board with a MN3005 fron ngoda Rob that he had had hidden in a dark drawer
"Working" at work is an artform I have mastered to Jedi-level...
Any news on when the dual delay and lfo add on PCBs from madbean will be available?
- LaceSensor
- Cap Cooler
Heres some better pics including the insides
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
Seiche wrote:got my board. now where to get those 24mm board-mount pots?
only one I can find is this one. Only in that useless value
Don't be so sure, Banzai is often out of stock with stuff they carry on
- Seiche
- Old Solderhand
Do you mean I should write them because it's not in the online store?sinner wrote:Seiche wrote:got my board. now where to get those 24mm board-mount pots?
only one I can find is this one. Only in that useless value
Don't be so sure, Banzai is often out of stock with stuff they carry on
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
You should do that with all your orders from Banzai. They owe me 60 euro in parts (backordered) since 2010Seiche wrote:Do you mean I should write them because it's not in the online store?sinner wrote:Seiche wrote:got my board. now where to get those 24mm board-mount pots?
only one I can find is this one. Only in that useless value
Don't be so sure, Banzai is often out of stock with stuff they carry on
- Seiche
- Old Solderhand
I think I get you now. You're saying that what's in the store isn't necessarily in stock, right? That's sucks dude.
I thought you were trying to say that what they have in their warehouse isn't necessarily visible online, lol. Trying to tell me that they might have the 24mm pcb pots but it doesn't show up online.
Hey I live in the city they are located, should I go there and give them some polish concrete shoes for you?
I thought you were trying to say that what they have in their warehouse isn't necessarily visible online, lol. Trying to tell me that they might have the 24mm pcb pots but it doesn't show up online.
Hey I live in the city they are located, should I go there and give them some polish concrete shoes for you?
- LaceSensor
- Cap Cooler
- danielzink
- Resistor Ronker
Information
- Posts: 389
- Joined: 23 Feb 2008, 19:27
- Completed builds: Too many: www.danielzink.com
- Location: Lansing, MI
- Has thanked: 8 times
- Been thanked: 27 times
or....
Mouser:
31VQ601-F
31VQ405-F
Dan
Mouser:
31VQ601-F
31VQ405-F
Dan
http://www.danielzink.com
MoonWatcher wrote: Silent ain't better. If someone cracks the shitwind, I want to know what's headed my way. Silence is for the library and the cemetery.
- Seiche
- Old Solderhand
Yeah I'll probably resort to that method. I've been doing this alot.LaceSensor wrote:or just use 16mm pots and wire peices of solid core onto them, like I do.
thanks! That's what I was looking for.danielzink wrote:31VQ601-F
31VQ405-F