LAST VALVE SOUND SIMULATOR

Free online ressources on guitars, amps, effects, guitar technique and more. Dedicated to the fond memory of its founder SPeter Davidoff.
Post Reply
User avatar
rcustoms
Resistor Ronker
Information
Posts: 426
Joined: 01 Oct 2009, 14:12
Location: COLOMBIA
Has thanked: 363 times
Been thanked: 520 times
Contact:

Post by rcustoms »

last valve sound simulator ,is a complete project found in the last everyday practical electronics magazine -august 2015
nirvana.jpg
this is the link
http://kat.cr/everyday-practical-electr ... ent?title=[kat.cr]everyday.practical.electronics.august.2015
realy awesome project
http://www.rcustomspedals.blogspot.com
guitars,pedals and amps.
@zuleta.rafael(Instagram)

User avatar
DrNomis
Old Solderhand
Information
Posts: 6807
Joined: 16 Jul 2009, 04:56
my favorite amplifier: Self-Built Valve Amp Head :)
Completed builds: Dallas Arbiter Fuzz Face,Tone Bender Professional Mk 3,Tone Bender 3-Knob,Baja BK Butler Tube Driver,Baja Real Tube Overdrive,Roger Mayer Octavia,EH Soul Preacher,Tech 21 XXL Distortion,MFOS Weird Sound Generator.
Location: Darwin,Northern Territory Australia
Has thanked: 98 times
Been thanked: 278 times

Post by DrNomis »

Cheers for that Rcustoms..... :thumbsup

Note for Windows users:
To download the torrent file in Microsoft Internet Explorer, right-click on it and select "Save As" and then save it in your Downloads folder, you will also need to download/install uTorrent and 7Zip if you don't already have them installed, 7Zip is for extracting the PDF from the downloaded file.... :thumbsup
Genius is not all about 99% perspiration, and 1% inspiration - sometimes the solution is staring you right in the face.-Frequencycentral.

User avatar
nickthemen
Breadboard Brother
Information
Posts: 57
Joined: 12 Jul 2007, 09:35
Has thanked: 36 times
Been thanked: 14 times

Post by nickthemen »


User avatar
phatt
Transistor Tuner
Information
Posts: 1224
Joined: 04 Aug 2010, 05:17
Location: Morayfield SE Qld AU
Has thanked: 8 times
Been thanked: 343 times

Post by phatt »

Thanks chaps, I read the artical,, Hum??
Someone may have more understanding of these things but to me that is just a fancy name for a tone control and frankly a tone control with only 3 or 4 dB of boost or cut is not something that would bother to build. Heck,,even an average parq Eq would make a bigger impression. :blackeye
Phil.

User avatar
Dirk_Hendrik
Old Solderhand
Information
Posts: 4193
Joined: 03 Jul 2007, 08:44
Location: Old Amsterdam
Has thanked: 232 times
Been thanked: 887 times
Contact:

Post by Dirk_Hendrik »

After a quick glance over the article I wondered why they did so much "right" ands then resorted to the use of 1/8" mini-jacks :?
Sorry. Plain out of planes.

http://www.dirk-hendrik.com

User avatar
Ice-9
Degoop Doctor
Information
Posts: 1094
Joined: 31 Mar 2009, 15:29
my favorite amplifier: Marshall
Completed builds: Far to many to afford the enclosures for them all. :)
Has thanked: 134 times
Been thanked: 359 times
Contact:

Post by Ice-9 »

Well my isp has blocked this page due to a UK court order :(
It's fairly straight forward, if you want to start it , press start. You can work out the rest of the controls for yourself !

No silicon heaven ? preposterous ! Where would all the calculators go ?

User avatar
bajaman
Old Solderhand
Information
Posts: 4549
Joined: 26 Jun 2007, 21:18
Location: New Brighton, Christchurch, NZ
Has thanked: 595 times
Been thanked: 2058 times

Post by bajaman »

check your email Mick :D
be kind to all animals - especially human beings

User avatar
tabbycat
Information

Post by tabbycat »

if it's a good project and worth something to you, as this is the current edition of the mag you may want to consider buying it online for the price of a drink or two.
show your support for the writers and keep a good publication running.

http://www.epemag.com/

obviously if you are livng on no money at all in china, india, etc, then this is not an option and using free downloads to educate yourself is a different matter.

User avatar
Ice-9
Degoop Doctor
Information
Posts: 1094
Joined: 31 Mar 2009, 15:29
my favorite amplifier: Marshall
Completed builds: Far to many to afford the enclosures for them all. :)
Has thanked: 134 times
Been thanked: 359 times
Contact:

Post by Ice-9 »

tabbycat wrote:if it's a good project and worth something to you, as this is the current edition of the mag you may want to consider buying it online for the price of a drink or two.
show your support for the writers and keep a good publication running.

http://www.epemag.com/

obviously if you are livng on no money at all in china, india, etc, then this is not an option and using free downloads to educate yourself is a different matter.
Good idea, but I was only wanting a look, still the mag could have some other interesting stuff in it so could always be worth a buy :secret:
It's fairly straight forward, if you want to start it , press start. You can work out the rest of the controls for yourself !

No silicon heaven ? preposterous ! Where would all the calculators go ?

User avatar
teemuk
Breadboard Brother
Information
Posts: 147
Joined: 17 Aug 2009, 19:54
Has thanked: 3 times
Been thanked: 55 times

Post by teemuk »

phatt wrote:Someone may have more understanding of these things but to me that is just a fancy name for a tone control and frankly a tone control with only 3 or 4 dB of boost or cut is not something that would bother to build. Heck,,even an average parq Eq would make a bigger impression
I have to agree.

Considering all the "packaging" and "marketing" involved this project is a big dissapointment.

Looking at it, it's really just a simple "waveshaper" coupled to some EQ'ing. Yes, it does recognize two of characteristics, which would be considered important ingredienmts of "tube sound" today. These would be amplitude/intermodulation distortion and non-linear frequency response due to weaker damping factor.

It's just how these issues are addressed that is terribly lacking. Yes, you will get soft distortion from an overdriven JFET but such non-linear "waveshaper" is not really going to capture all the interaction and dynamics of a typical MULTI-STAGE tube amplifier, which cascades several waveshapers.

So for "tube distortion" part this ends up being just an overdriven source follower amp. Okay. Look at just about any GUITAR AMP schematic and you'll find examples of much more ambitious and realistic schemes to fake tube amplifier's amplitude distortions. Compared to stuff employed in Peavey's TransTube amps, Crate amps, AMT pedals, Prithard amps, Quilter amps, etc. this "tube emulation" looks like a joke. If "distorting" is your only criteria for this performance, then I'll guess you'll be happy with it, though.

The other part is that EQ. Yes, tube amps with poor damping will "reflect" the impedance of the load in their frequency response since their gain changes in interaction with loading impedance. This is a recogniseable characteristic but in the end this design simply mimics the non-linear response with a filter, instead of actually doing something that really interacts with your amp/speaker load (as in what 99% of modern guitar amps do). So in the end they simply replicate some EQ curve of their preference (note that very few guitar amps are loaded by tuned cabs so the resulting response is actually different), and I agree you could just as well achieve the very same end results with a graphic EQ. ...And in practice this design is not really different from a graphic EQ design stripped to "fixed" values.

Terribly dissapointing and boring design in all regards.

I mean, how many of us haven't seen a distortion effect coupled to a "cabinet simulator" fixed EQ? I trust most of us have seen much better attempts than this.

User avatar
Groovenut
Resistor Ronker
Information
Posts: 299
Joined: 07 Jan 2011, 16:31
Has thanked: 60 times
Been thanked: 100 times

Post by Groovenut »

My take from having a look at the circuit is, this is meant to be a tube power amp emulator with the ability to emulate a speaker curve. Not a full blown tube amp. As such the amount of overdrive is going to be fairly subtle. I would guess the main intent for this project is as a direct recording interface. The feature set doesn't really make much sense otherwise.

User avatar
phatt
Transistor Tuner
Information
Posts: 1224
Joined: 04 Aug 2010, 05:17
Location: Morayfield SE Qld AU
Has thanked: 8 times
Been thanked: 343 times

Post by phatt »

teemuk wrote:
phatt wrote:Someone may have more understanding of these things but to me that is just a fancy name for a tone control and frankly a tone control with only 3 or 4 dB of boost or cut is not something that would bother to build. Heck,,even an average parq Eq would make a bigger impression
I have to agree.

Considering all the "packaging" and "marketing" involved this project is a big dissapointment.

Looking at it, it's really just a simple "waveshaper" coupled to some EQ'ing. Yes, it does recognize two of characteristics, which would be considered important ingredienmts of "tube sound" today. These would be amplitude/intermodulation distortion and non-linear frequency response due to weaker damping factor.

It's just how these issues are addressed that is terribly lacking. Yes, you will get soft distortion from an overdriven JFET but such non-linear "waveshaper" is not really going to capture all the interaction and dynamics of a typical MULTI-STAGE tube amplifier, which cascades several waveshapers.

So for "tube distortion" part this ends up being just an overdriven source follower amp. Okay. Look at just about any GUITAR AMP schematic and you'll find examples of much more ambitious and realistic schemes to fake tube amplifier's amplitude distortions. Compared to stuff employed in Peavey's TransTube amps, Crate amps, AMT pedals, Prithard amps, Quilter amps, etc. this "tube emulation" looks like a joke. If "distorting" is your only criteria for this performance, then I'll guess you'll be happy with it, though.

The other part is that EQ. Yes, tube amps with poor damping will "reflect" the impedance of the load in their frequency response since their gain changes in interaction with loading impedance. This is a recogniseable characteristic but in the end this design simply mimics the non-linear response with a filter, instead of actually doing something that really interacts with your amp/speaker load (as in what 99% of modern guitar amps do). So in the end they simply replicate some EQ curve of their preference (note that very few guitar amps are loaded by tuned cabs so the resulting response is actually different), and I agree you could just as well achieve the very same end results with a graphic EQ. ...And in practice this design is not really different from a graphic EQ design stripped to "fixed" values.

Terribly dissapointing and boring design in all regards.

I mean, how many of us haven't seen a distortion effect coupled to a "cabinet simulator" fixed EQ? I trust most of us have seen much better attempts than this.
Thanks Teemu, I was hoping someone with a deeper understanding would chime in and help clarify the details.
I lost interest when I realized they where talking about response info for hifi speakers which is a world away from guitar sound.

I note you mention AMT pedals, Any Good? Any observations would be welcomed.

I note *Bajaman* has positive comments about those units.
Thread here; https://www.freestompboxes.org/viewtopic.php?f=7&t=26365
Phil.

Post Reply