EHX - Slapback Echo (factory schematic 1978) [schematic]
- modman
- a d m i n
Information
- Posts: 4890
- Joined: 19 Jun 2007, 16:57
- Has thanked: 4394 times
- Been thanked: 2131 times
Don't really know whether it's correct/rare or worth posting at all, but thought I'd share it anyway:
(link deleted, check Stephen's link below)
CJ Eletronics lists it as 'non proven' (that it's the EH SB or that it is correct?)
modman
(link deleted, check Stephen's link below)
CJ Eletronics lists it as 'non proven' (that it's the EH SB or that it is correct?)
modman
Last edited by modman on 27 Dec 2007, 12:46, edited 2 times in total.
Please, support freestompboxes.org on Patreon for just 1 pcb per year! Or donate directly through PayPal
- Stephengiles
- Breadboard Brother
Information
- Posts: 106
- Joined: 04 Nov 2007, 13:02
- Location: Selsdon, England
- modman
- a d m i n
Information
- Posts: 4890
- Joined: 19 Jun 2007, 16:57
- Has thanked: 4394 times
- Been thanked: 2131 times
Wow, thanks big boy!
Please, support freestompboxes.org on Patreon for just 1 pcb per year! Or donate directly through PayPal
- The Rotagilla
- Diode Debunker
I don't have both schematics handy right now but how did this differ from the EH Full Double Tracking Effect?
- Stephengiles
- Breadboard Brother
Information
- Posts: 106
- Joined: 04 Nov 2007, 13:02
- Location: Selsdon, England
Neither do I, but it may just have been a name change. On the other hand I believe the FDTE used the MN 3005 with a 4047 clock driver.
- The Rotagilla
- Diode Debunker
The copy I have of the Full Double Tracking Effect schematic says "Revised Slapback Echo" and ran off a CD4047BE and a MN3005.
- BJF
- Resistor Ronker
Hi,
The Slap back uses an SAD 1024 and it does not really give a slapback effect as delaytime is too short.
Yes I have serviced one of those, didn't look too close on the schematic but it appears to be fine.
This one was a little disappointing
Have fun
BJ
The Slap back uses an SAD 1024 and it does not really give a slapback effect as delaytime is too short.
Yes I have serviced one of those, didn't look too close on the schematic but it appears to be fine.
This one was a little disappointing
Have fun
BJ