Ibanez - PT-9 Phaser [schematic]
- analogguru
- Old Solderhand
Information
Here is the:
Ibanez PT9 (Phaser) service manual
Have a look at the unusual FET-bias method !
analogguru
Ibanez PT9 (Phaser) service manual
Have a look at the unusual FET-bias method !
analogguru
There´s a sucker born every minute - and too many of them end up in the bootweak pedal biz.
- Dirk_Hendrik
- Old Solderhand
Information
Wow!
That one has taken quite some time to surface! Excellent!
That one has taken quite some time to surface! Excellent!
- bajaman
- Old Solderhand
Information
- Posts: 4549
- Joined: 26 Jun 2007, 21:18
- Location: New Brighton, Christchurch, NZ
- Has thanked: 595 times
- Been thanked: 2058 times
Thanks AG
Any other Ibanez manuals that you are looking for guys - just ask me
bajaman
Any other Ibanez manuals that you are looking for guys - just ask me
bajaman
- Dirk_Hendrik
- Old Solderhand
Information
I heard yebajaman wrote:Thanks AG
Any other Ibanez manuals that you are looking for guys - just ask me
bajaman
So after an afternoon of scoping (and taking action) I still have a "corrupted" (slightly distorted on the positice top of my input sine) output signal from the DA section of the MC4102 chip in an Ibanez DDL20 delay. You have a schematic for that!?? Man! That would owe me a cigar to you!
- bajaman
- Old Solderhand
Information
- Posts: 4549
- Joined: 26 Jun 2007, 21:18
- Location: New Brighton, Christchurch, NZ
- Has thanked: 595 times
- Been thanked: 2058 times
I have DDL20, FL305, and Flying pan schems etc.
Give me a day or two and they will be "found"
bajaman
Give me a day or two and they will be "found"
bajaman
- analogguru
- Old Solderhand
Information
You mean this "old dog" ?:Oh, I'd love to see the original Ibanez Standard fuzz too!
Ibanez Standard Fuzz schematic
analogguru
There´s a sucker born every minute - and too many of them end up in the bootweak pedal biz.
- analogguru
- Old Solderhand
Information
Original (used?) values: You want to see guts ?I would like to see the original Ibanez value- curious!
analogguru
There´s a sucker born every minute - and too many of them end up in the bootweak pedal biz.
- borislavgajic
- Opamp Operator
Information
- Posts: 1542
- Joined: 27 Feb 2008, 14:23
- Completed builds: ...script phase90,ETI phaser,Ross phaser,mutronC200,vox wah,WH10,FW-3,mutronIII,DrQuack,Penfoldautowah,Tubezipper,
Dipthonizer,seekwah,Talkingpedal,morleywha
...soulpreacher,dynacomp,compulator
...buzzaround,fuzzfactory,screwdriver,sho,superdouper,St-9,RogerMayer octavia,Tychobrahe octavia,paralelluniverse,string damper,slowgear
...CE-2,ibanez fL301,EH theCloneTheory
EHX bassmicrosynth,EHX EnglishMuffin,Tube Phaser,springtubereverb ,greyDOD,FulldriveII mosfet,OCD,VOX repeat percussion,RingStinger,Meatball,12stage phaser.... - Location: Sombor , Serbia
- Has thanked: 131 times
- Been thanked: 277 times
analogguru wrote:Here is the:
Ibanez PT9 (Phaser) service manual
Have a look at the unusual FET-bias method !
analogguru
the link is dead, anyone have it ?
i have a dead TP9 to resurect
thanks !
- borislavgajic
- Opamp Operator
Information
- Posts: 1542
- Joined: 27 Feb 2008, 14:23
- Completed builds: ...script phase90,ETI phaser,Ross phaser,mutronC200,vox wah,WH10,FW-3,mutronIII,DrQuack,Penfoldautowah,Tubezipper,
Dipthonizer,seekwah,Talkingpedal,morleywha
...soulpreacher,dynacomp,compulator
...buzzaround,fuzzfactory,screwdriver,sho,superdouper,St-9,RogerMayer octavia,Tychobrahe octavia,paralelluniverse,string damper,slowgear
...CE-2,ibanez fL301,EH theCloneTheory
EHX bassmicrosynth,EHX EnglishMuffin,Tube Phaser,springtubereverb ,greyDOD,FulldriveII mosfet,OCD,VOX repeat percussion,RingStinger,Meatball,12stage phaser.... - Location: Sombor , Serbia
- Has thanked: 131 times
- Been thanked: 277 times
me like it too>g.< wrote:solved...
inside trimers where out of range.
this is a nice lush phaser.
Information
- Posts: 6
- Joined: 04 Oct 2011, 11:52
- Contact:
Hello,
Anyone have the procedure to calibrate the PHASER Ibanez PT9.
thank you in advance
Anyone have the procedure to calibrate the PHASER Ibanez PT9.
thank you in advance
Informatique, Guitare et Graphisme : http://info-guit.pagesperso-orange.fr
- Dirk_Hendrik
- Old Solderhand
Information
See my pm at DIYstompboxes from yesterday?
The you'd know that wanadoo considers my info@ a spam IP and I asked you to provide a different mailadress so you'd have that stuff by now.
Nevertheless,
The you'd know that wanadoo considers my info@ a spam IP and I asked you to provide a different mailadress so you'd have that stuff by now.
Nevertheless,
Information
- Posts: 6
- Joined: 04 Oct 2011, 11:52
- Contact:
A very big thank, my oscilloscope will again be useful
Informatique, Guitare et Graphisme : http://info-guit.pagesperso-orange.fr
Information
- Posts: 6
- Joined: 04 Oct 2011, 11:52
- Contact:
hello,
my PT9 was modified by Robert Keeley. Someone he know the changes ?
The obtained lissasjou currently does not correspond to the service manual lissajou Ibanez.
There are three more resistance
and a capacitor more
and perhaps other changes ?
my PT9 was modified by Robert Keeley. Someone he know the changes ?
The obtained lissasjou currently does not correspond to the service manual lissajou Ibanez.
There are three more resistance
and a capacitor more
and perhaps other changes ?
- Attachments
-
- DSCN1003.JPG (32.42 KiB) Viewed 5853 times
-
- DSCN0999.JPG (34.36 KiB) Viewed 5853 times
Informatique, Guitare et Graphisme : http://info-guit.pagesperso-orange.fr
Information
- Posts: 6
- Joined: 04 Oct 2011, 11:52
- Contact:
Hello,
would anyone schematics including changes keeley or the calibration procedure keeley ?
would anyone schematics including changes keeley or the calibration procedure keeley ?
Informatique, Guitare et Graphisme : http://info-guit.pagesperso-orange.fr