Problem with Klon's clean settings

Frequent questions about dead or faulty pedals. Whether you repair, mod or build pedals, debugging is important. Threads about general debugging problems irrespective of the circuit involved...

Problem with Klon's clean settings

Postby acast83 » 12 Mar 2013, 22:20

Hy guys. I have a problem with Klon Centaur I recently made using madbean instrunctions (sunking ver3).

Problem is that with NO gain settings (gain pot on zero) I still have a bit overdriven tone and not totally clean and sparkling tone. Month ago I made anoher Klon and it didn't have that kind of problem so I am in a big dillema and don't know what to do. I tried changing gain pot because when I measured resistance on first and third lug of gain pot it showed almost 0 resistance (0,1k or something) and not full resistance. When I took out old pot pot and measured it again multimeter showed full resistance normally (100k).

Can anyone who has a bit more experience than I help me with my problem?
Thanks in advance
acast83
 
Posts: 7
Joined: 01 Sep 2012, 19:12
Has thanked: 6 times
Have thanks: 0 time

Re: Problem with Klon's clean settings

Postby friedtransistor » 13 Mar 2013, 03:05

could you please post a schmatic? I make be able to see what's going on. or maybe not. with me there's no guarentee :wink:
For all you starwars fans...
http://lolsnaps.com/upload_pic/TheDarthFader-19337.jpg

Sorry, downsized by request.

Did I mention I love bass?
User avatar
friedtransistor
Solder Soldier
 
Posts: 243
Joined: 15 Feb 2013, 00:15
Has thanked: 16 times
Have thanks: 30 times

Re: Problem with Klon's clean settings

Postby acast83 » 13 Mar 2013, 16:33

acast83
 
Posts: 7
Joined: 01 Sep 2012, 19:12
Has thanked: 6 times
Have thanks: 0 time

Re: Problem with Klon's clean settings

Postby friedtransistor » 15 Mar 2013, 22:02

Ooo, ouch. I don't know if I can do this, but we'll see :whappen: . Thanks, I'll get back to you when I figure out whether or not I can see what's wrong...
For all you starwars fans...
http://lolsnaps.com/upload_pic/TheDarthFader-19337.jpg

Sorry, downsized by request.

Did I mention I love bass?
User avatar
friedtransistor
Solder Soldier
 
Posts: 243
Joined: 15 Feb 2013, 00:15
Has thanked: 16 times
Have thanks: 30 times

Re: Problem with Klon's clean settings

Postby friedtransistor » 14 Apr 2013, 21:24

sorry, it's been a while... let's see. Which half of the gain pot did you measure? If it was PA 1 I would check the 1.5k parallel to it. If it's PA2, then I don't know. Also, was this breadboarded or soldered?
For all you starwars fans...
http://lolsnaps.com/upload_pic/TheDarthFader-19337.jpg

Sorry, downsized by request.

Did I mention I love bass?
User avatar
friedtransistor
Solder Soldier
 
Posts: 243
Joined: 15 Feb 2013, 00:15
Has thanked: 16 times
Have thanks: 30 times


Return to Debugging

Who is online

Users browsing this forum: No registered users and 1 guest