What companies do small pub runs
- chicago_mike
- Tube Twister
I want to get a small run of PCBs made and can only remember seeedstudio..
Who else is out there?
Who else is out there?
Skyline FX 2013
- aion
- Solder Soldier
Information
Go nuts
https://pcbshopper.com/
FWIW, I do 99% of my boards through Elecrow, after using Seeed before that for a couple years. Issues are rare, but they've always made it right ASAP, including remaking boards for free if there's an error. I recommend them very highly.
https://pcbshopper.com/
FWIW, I do 99% of my boards through Elecrow, after using Seeed before that for a couple years. Issues are rare, but they've always made it right ASAP, including remaking boards for free if there's an error. I recommend them very highly.
- plush
- Cap Cooler
My personal favourite is JLCPCB.
Pros: pretty nice quality
Cons: they incorporate their ID into your pcb design as a silk screen and there is nothing you can do about it (except than hide it behind some component or place it on a piece, separated by vcut/milling from the rest of your design).
Pros: pretty nice quality
Cons: they incorporate their ID into your pcb design as a silk screen and there is nothing you can do about it (except than hide it behind some component or place it on a piece, separated by vcut/milling from the rest of your design).
- Ice-9
- Degoop Doctor
Information
I agree, I use JLCPCB a lot at the moment, but your comment on cons is incorrect in my case. There are no markings on any of my orders, they only have what I put on the silks.plush wrote:My personal favourite is JLCPCB.
Pros: pretty nice quality
Cons: they incorporate their ID into your pcb design as a silk screen and there is nothing you can do about it (except than hide it behind some component or place it on a piece, separated by vcut/milling from the rest of your design).
Pros- Very good price, amazingly quick delivery from order date to UK - great quality and now no price difference for board colours.
It's fairly straight forward, if you want to start it , press start. You can work out the rest of the controls for yourself !
No silicon heaven ? preposterous ! Where would all the calculators go ?
No silicon heaven ? preposterous ! Where would all the calculators go ?
- plush
- Cap Cooler
Maybe you should take a closer look at yours.Ice-9 wrote: but your comment on cons is incorrect in my case. There are no markings on any of my orders, they only have what I put on the silks.
Their marking is mandatory since they automatically sort and check them. I've had a lot of pcbs from jlc and all had markings on them.
- Ice-9
- Degoop Doctor
Information
Yeah, found the numbersplush wrote:Maybe you should take a closer look at yours.Ice-9 wrote: but your comment on cons is incorrect in my case. There are no markings on any of my orders, they only have what I put on the silks.
Their marking is mandatory since they automatically sort and check them. I've had a lot of pcbs from jlc and all had markings on them.
It's fairly straight forward, if you want to start it , press start. You can work out the rest of the controls for yourself !
No silicon heaven ? preposterous ! Where would all the calculators go ?
No silicon heaven ? preposterous ! Where would all the calculators go ?
- Dirk_Hendrik
- Old Solderhand
Information
Considering the section this thread is in I really love the typo in the thread title. I was more or less hoping for a parody thread
- Ice-9
- Degoop Doctor
Information
Never even noticed that, but I'm up for a pub run.Dirk_Hendrik wrote:Considering the section this thread is in I really love the typo in the thread title. I was more or less hoping for a parody thread
It's fairly straight forward, if you want to start it , press start. You can work out the rest of the controls for yourself !
No silicon heaven ? preposterous ! Where would all the calculators go ?
No silicon heaven ? preposterous ! Where would all the calculators go ?
- deltafred
- Opamp Operator
Hell yea, do you know of any that are open, they're all shut around here!
The last pub I was in was the last gig I played on 28th February.
Politics is the art of so plucking the goose as to obtain the most feathers with the least squawking. - R.G. 2011
Jeez, she's an ugly bastard, she makes my socks hurt. I hope it's no ones missus here. - Ice-9 2012
Jeez, she's an ugly bastard, she makes my socks hurt. I hope it's no ones missus here. - Ice-9 2012
- Ice-9
- Degoop Doctor
Information
Aye it's crazy init as all the pubs are shut around here as well, something to do with some sort of new virus I have been hearing about lately but they were open when i posted this in 2019 lol.
Fingers crossed we all get a bit of normality back in 2021.
Happy New Year Deltafred.
Fingers crossed we all get a bit of normality back in 2021.
Happy New Year Deltafred.
It's fairly straight forward, if you want to start it , press start. You can work out the rest of the controls for yourself !
No silicon heaven ? preposterous ! Where would all the calculators go ?
No silicon heaven ? preposterous ! Where would all the calculators go ?
- deltafred
- Opamp Operator
Yes, Happy New Year to all on FSB.
Politics is the art of so plucking the goose as to obtain the most feathers with the least squawking. - R.G. 2011
Jeez, she's an ugly bastard, she makes my socks hurt. I hope it's no ones missus here. - Ice-9 2012
Jeez, she's an ugly bastard, she makes my socks hurt. I hope it's no ones missus here. - Ice-9 2012