EHX - Talking Pedal [schematic]
- borislavgajic
- Opamp Operator
Information
- Posts: 1542
- Joined: 27 Feb 2008, 14:23
- Completed builds: ...script phase90,ETI phaser,Ross phaser,mutronC200,vox wah,WH10,FW-3,mutronIII,DrQuack,Penfoldautowah,Tubezipper,
Dipthonizer,seekwah,Talkingpedal,morleywha
...soulpreacher,dynacomp,compulator
...buzzaround,fuzzfactory,screwdriver,sho,superdouper,St-9,RogerMayer octavia,Tychobrahe octavia,paralelluniverse,string damper,slowgear
...CE-2,ibanez fL301,EH theCloneTheory
EHX bassmicrosynth,EHX EnglishMuffin,Tube Phaser,springtubereverb ,greyDOD,FulldriveII mosfet,OCD,VOX repeat percussion,RingStinger,Meatball,12stage phaser.... - Location: Sombor , Serbia
- Has thanked: 131 times
- Been thanked: 281 times
I made it ,aded some mod's and works very well(IMHO)
http://filters.muziq.be/model/eh/talkingpedal
http://electroconducive.googlepages.com ... H-3200.pdf
there are 2 ldr's instead of pot( so it is not like original),but it is talking nicely
AAAJJJOOOJJ
AJJEEE......
my modification is primitive but not bad:
-bright white led..glued to old wah rocker(brightness is controllable with 4k7 pot.....and that gives you variety of voice colours....from very thin ..to very deep voice)
- and I conected old wah pot to one of ldr's (switchable) so there are 3 differend mods of talking............
try to make it I am positive You wil be happy!!!
cheers
http://filters.muziq.be/model/eh/talkingpedal
http://electroconducive.googlepages.com ... H-3200.pdf
there are 2 ldr's instead of pot( so it is not like original),but it is talking nicely
AAAJJJOOOJJ
AJJEEE......
my modification is primitive but not bad:
-bright white led..glued to old wah rocker(brightness is controllable with 4k7 pot.....and that gives you variety of voice colours....from very thin ..to very deep voice)
- and I conected old wah pot to one of ldr's (switchable) so there are 3 differend mods of talking............
try to make it I am positive You wil be happy!!!
cheers
- The Rotagilla
- Diode Debunker
Don't toy with my emotions on this one! I'm very close to laying out the money for a real one. We need sound samples!
Please?
Please?
The television will not be revolutionized.
- borislavgajic
- Opamp Operator
Information
- Posts: 1542
- Joined: 27 Feb 2008, 14:23
- Completed builds: ...script phase90,ETI phaser,Ross phaser,mutronC200,vox wah,WH10,FW-3,mutronIII,DrQuack,Penfoldautowah,Tubezipper,
Dipthonizer,seekwah,Talkingpedal,morleywha
...soulpreacher,dynacomp,compulator
...buzzaround,fuzzfactory,screwdriver,sho,superdouper,St-9,RogerMayer octavia,Tychobrahe octavia,paralelluniverse,string damper,slowgear
...CE-2,ibanez fL301,EH theCloneTheory
EHX bassmicrosynth,EHX EnglishMuffin,Tube Phaser,springtubereverb ,greyDOD,FulldriveII mosfet,OCD,VOX repeat percussion,RingStinger,Meatball,12stage phaser.... - Location: Sombor , Serbia
- Has thanked: 131 times
- Been thanked: 281 times
It is nice to meet somebody with emotions(opened)
the schem is original...only problem to build is that pot......as we all know
it is not hard to make it.....and with two ldr's and one bright led in your hand
you can find your tone........
I filmed it with my nokia phone ....but don't know how to post it here (only 240 kb)
so give me your e mail and I 'll send You gladly.......
do not worry......greetings
as you can see on this picture.....we have movable LED that can be dimed....it simulates the original pot( not bad sounding)....
the schem is original...only problem to build is that pot......as we all know
it is not hard to make it.....and with two ldr's and one bright led in your hand
you can find your tone........
I filmed it with my nokia phone ....but don't know how to post it here (only 240 kb)
so give me your e mail and I 'll send You gladly.......
do not worry......greetings
as you can see on this picture.....we have movable LED that can be dimed....it simulates the original pot( not bad sounding)....
Last edited by borislavgajic on 16 Jun 2008, 16:45, edited 1 time in total.
- The Rotagilla
- Diode Debunker
PM sent, thanks!
Is that a Dearmond shell that it's built into?
Is that a Dearmond shell that it's built into?
The television will not be revolutionized.
- borislavgajic
- Opamp Operator
Information
- Posts: 1542
- Joined: 27 Feb 2008, 14:23
- Completed builds: ...script phase90,ETI phaser,Ross phaser,mutronC200,vox wah,WH10,FW-3,mutronIII,DrQuack,Penfoldautowah,Tubezipper,
Dipthonizer,seekwah,Talkingpedal,morleywha
...soulpreacher,dynacomp,compulator
...buzzaround,fuzzfactory,screwdriver,sho,superdouper,St-9,RogerMayer octavia,Tychobrahe octavia,paralelluniverse,string damper,slowgear
...CE-2,ibanez fL301,EH theCloneTheory
EHX bassmicrosynth,EHX EnglishMuffin,Tube Phaser,springtubereverb ,greyDOD,FulldriveII mosfet,OCD,VOX repeat percussion,RingStinger,Meatball,12stage phaser.... - Location: Sombor , Serbia
- Has thanked: 131 times
- Been thanked: 281 times
no it is plastic Daphon wah ......convert 3gp into avi ......tell me how you like it!!!
and when you put a nother dist and octave down pedal in front of it......it is saying:
"heeeey man are you insaneeeeeeiiiiooouuuuu??????"
and when you put a nother dist and octave down pedal in front of it......it is saying:
"heeeey man are you insaneeeeeeiiiiooouuuuu??????"
- The Rotagilla
- Diode Debunker
Downloaded and saved as .avi, video but no audio.
The television will not be revolutionized.
- marcao_cfh
- Breadboard Brother
Cool!!! Just a question, how did you wired the "CV in"?
- borislavgajic
- Opamp Operator
Information
- Posts: 1542
- Joined: 27 Feb 2008, 14:23
- Completed builds: ...script phase90,ETI phaser,Ross phaser,mutronC200,vox wah,WH10,FW-3,mutronIII,DrQuack,Penfoldautowah,Tubezipper,
Dipthonizer,seekwah,Talkingpedal,morleywha
...soulpreacher,dynacomp,compulator
...buzzaround,fuzzfactory,screwdriver,sho,superdouper,St-9,RogerMayer octavia,Tychobrahe octavia,paralelluniverse,string damper,slowgear
...CE-2,ibanez fL301,EH theCloneTheory
EHX bassmicrosynth,EHX EnglishMuffin,Tube Phaser,springtubereverb ,greyDOD,FulldriveII mosfet,OCD,VOX repeat percussion,RingStinger,Meatball,12stage phaser.... - Location: Sombor , Serbia
- Has thanked: 131 times
- Been thanked: 281 times
- marcao_cfh
- Breadboard Brother
Sorry, I think my question was a little confusing. I understood the white LED and the original pot part. what I wanted to ask is how you connected the part of the circuit with the transistors and 2 LEDs. Just a pot in series with the battery?
- borislavgajic
- Opamp Operator
Information
- Posts: 1542
- Joined: 27 Feb 2008, 14:23
- Completed builds: ...script phase90,ETI phaser,Ross phaser,mutronC200,vox wah,WH10,FW-3,mutronIII,DrQuack,Penfoldautowah,Tubezipper,
Dipthonizer,seekwah,Talkingpedal,morleywha
...soulpreacher,dynacomp,compulator
...buzzaround,fuzzfactory,screwdriver,sho,superdouper,St-9,RogerMayer octavia,Tychobrahe octavia,paralelluniverse,string damper,slowgear
...CE-2,ibanez fL301,EH theCloneTheory
EHX bassmicrosynth,EHX EnglishMuffin,Tube Phaser,springtubereverb ,greyDOD,FulldriveII mosfet,OCD,VOX repeat percussion,RingStinger,Meatball,12stage phaser.... - Location: Sombor , Serbia
- Has thanked: 131 times
- Been thanked: 281 times
the idea was tooked from here.....
http://www.geocities.com/thetonegod/roc ... /rock.html
what you should get for the original eh talkingpedal is two leds....first one should go from dark to light(mah resistance to ground)....and the other led from dark to light and to dark again(half resistance to hround and to resistance again)...that was the dual pot simulation..kind of ........
but when I made talking pedal ,best results were with cigarette lighter(one with little LED light)....waving around LDR-s
http://www.geocities.com/thetonegod/roc ... /rock.html
what you should get for the original eh talkingpedal is two leds....first one should go from dark to light(mah resistance to ground)....and the other led from dark to light and to dark again(half resistance to hround and to resistance again)...that was the dual pot simulation..kind of ........
but when I made talking pedal ,best results were with cigarette lighter(one with little LED light)....waving around LDR-s
- borislavgajic
- Opamp Operator
Information
- Posts: 1542
- Joined: 27 Feb 2008, 14:23
- Completed builds: ...script phase90,ETI phaser,Ross phaser,mutronC200,vox wah,WH10,FW-3,mutronIII,DrQuack,Penfoldautowah,Tubezipper,
Dipthonizer,seekwah,Talkingpedal,morleywha
...soulpreacher,dynacomp,compulator
...buzzaround,fuzzfactory,screwdriver,sho,superdouper,St-9,RogerMayer octavia,Tychobrahe octavia,paralelluniverse,string damper,slowgear
...CE-2,ibanez fL301,EH theCloneTheory
EHX bassmicrosynth,EHX EnglishMuffin,Tube Phaser,springtubereverb ,greyDOD,FulldriveII mosfet,OCD,VOX repeat percussion,RingStinger,Meatball,12stage phaser.... - Location: Sombor , Serbia
- Has thanked: 131 times
- Been thanked: 281 times
here is video demo of talking pedall........
sorry it was filmed with my phone....
sorry it was filmed with my phone....
- Attachments
-
- demo.rar
- (962.15 KiB) Downloaded 386 times
- marcao_cfh
- Breadboard Brother
Thanks for the answer. Wow, what a great sound this box have, I liked the soundclip a lot. I will add this to my to-build list!!! Hope to start it soon. And when I finish it, I will have lots of filter effects (I just finished a Bass Balls, building a probe-wah and the next ones are the Talking Pedal and maybe Tim Escobedo's VCF filter) .
- DiscoFreq
- Resistor Ronker
Information
Nice, I have a PUE Talking Pedal (a plastic Polish thing from the 70's or 80's) that does the vowel thing, I should check if it's a copy...
EffectsDatabase: http://www.effectsdatabase.com
22000 pedals, 4000 brands, 350 brand interviews
NAMM 2016: http://fxdb.org/namm
22000 pedals, 4000 brands, 350 brand interviews
NAMM 2016: http://fxdb.org/namm
- Silent Fly
- Resistor Ronker
Very cool pedal! It sounds like something Steve Vai would like.borislavgajic wrote:here is video demo of talking pedall........
sorry it was filmed with my phone....
Teeeeaaaiouaeanks!
"Remember - all I am offering is the truth, nothing more". Morpheus
- DiscoFreq
- Resistor Ronker
Information
Ok, I finally found it, my pedal is the PUE Talker, not the PUE Talking Pedal, but it should be the same, just a different name.
I made some new pictures also from the inside:
http://filters.muziq.be/model/pue/talker
Not very sharp, but it should be enough to see if the circuit is a copy or not...
I have several other PUE pedals, some of which could be EH copies too: Attack Equalizer, Small Phaser (with phaser/vibrato switch), Sustain Filter (a very nice fuzz, but very quiet), Envelope Filter, Wah-Fuzz,... All of them are big plastic boxes
I made some new pictures also from the inside:
http://filters.muziq.be/model/pue/talker
Not very sharp, but it should be enough to see if the circuit is a copy or not...
I have several other PUE pedals, some of which could be EH copies too: Attack Equalizer, Small Phaser (with phaser/vibrato switch), Sustain Filter (a very nice fuzz, but very quiet), Envelope Filter, Wah-Fuzz,... All of them are big plastic boxes
EffectsDatabase: http://www.effectsdatabase.com
22000 pedals, 4000 brands, 350 brand interviews
NAMM 2016: http://fxdb.org/namm
22000 pedals, 4000 brands, 350 brand interviews
NAMM 2016: http://fxdb.org/namm
- borislavgajic
- Opamp Operator
Information
- Posts: 1542
- Joined: 27 Feb 2008, 14:23
- Completed builds: ...script phase90,ETI phaser,Ross phaser,mutronC200,vox wah,WH10,FW-3,mutronIII,DrQuack,Penfoldautowah,Tubezipper,
Dipthonizer,seekwah,Talkingpedal,morleywha
...soulpreacher,dynacomp,compulator
...buzzaround,fuzzfactory,screwdriver,sho,superdouper,St-9,RogerMayer octavia,Tychobrahe octavia,paralelluniverse,string damper,slowgear
...CE-2,ibanez fL301,EH theCloneTheory
EHX bassmicrosynth,EHX EnglishMuffin,Tube Phaser,springtubereverb ,greyDOD,FulldriveII mosfet,OCD,VOX repeat percussion,RingStinger,Meatball,12stage phaser.... - Location: Sombor , Serbia
- Has thanked: 131 times
- Been thanked: 281 times
Great ....thank You very much!!!!!
it seems that it is not made of plastic??!!
it seems that it is not made of plastic??!!
- analogguru
- Old Solderhand
Information
For the tracers I attached an improved picture of the track side derived from Discofreq´s photo.
analogguru
analogguru
There´s a sucker born every minute - and too many of them end up in the bootweak pedal biz.
- DiscoFreq
- Resistor Ronker
Information
All PUE pedals are plastic, the metal look on the inside is just paintborislavgajic wrote:Great ....thank You very much!!!!!
it seems that it is not made of plastic??!!
I resized the original to 40 or 50%, so I can cut this part out of the original if needed...analogguru wrote:For the tracers I attached an improved picture of the track side derived from Discofreq´s photo.
analogguru
EffectsDatabase: http://www.effectsdatabase.com
22000 pedals, 4000 brands, 350 brand interviews
NAMM 2016: http://fxdb.org/namm
22000 pedals, 4000 brands, 350 brand interviews
NAMM 2016: http://fxdb.org/namm
- analogguru
- Old Solderhand
Information
Every higher resolution is helpful.I resized the original to 40 or 50%, so I can cut this part out of the original if needed...
analogguru
There´s a sucker born every minute - and too many of them end up in the bootweak pedal biz.
- DiscoFreq
- Resistor Ronker
Information
I added better pictures of both sides of the PCB. It could take a while before you see them (pages are cached), so here are direct links:
http://files.muziq.be/pics/pue_talker_006.jpg
http://files.muziq.be/pics/pue_talker_007.jpg
http://files.muziq.be/pics/pue_talker_006.jpg
http://files.muziq.be/pics/pue_talker_007.jpg
EffectsDatabase: http://www.effectsdatabase.com
22000 pedals, 4000 brands, 350 brand interviews
NAMM 2016: http://fxdb.org/namm
22000 pedals, 4000 brands, 350 brand interviews
NAMM 2016: http://fxdb.org/namm