Voodoo Lab - Bosstone
- RLBJR65
- Resistor Ronker
Information
Anyone have the schematic? I heard it was the same as the Tennesee ShoSound version.
I did some work with this guy http://www.bosstone.net/dev/index.html He bought and registered the BossTone name a year or 2 ago.
Seemed like a nice guy with big dreams but he doesn't know sh*t about electronics didn't know how to wire the stomp switch up etc.
Wonder if he's using one of my pcb's? https://img514.imageshack.us/my.php?ima ... ne3tg4.gif
https://img516.imageshack.us/my.php?ima ... newmt6.gif
If anyone gets a chance please take a peek for me!
I did some work with this guy http://www.bosstone.net/dev/index.html He bought and registered the BossTone name a year or 2 ago.
Seemed like a nice guy with big dreams but he doesn't know sh*t about electronics didn't know how to wire the stomp switch up etc.
Wonder if he's using one of my pcb's? https://img514.imageshack.us/my.php?ima ... ne3tg4.gif
https://img516.imageshack.us/my.php?ima ... newmt6.gif
If anyone gets a chance please take a peek for me!
- MoreCowbell
- Transistor Tuner
Information
Proof that he isn't really familiar with Bosstones....from his website....RLBJR65 wrote: I did some work with this guy http://www.bosstone.net/dev/index.html He bought and registered the BossTone name a year or 2 ago.
Seemed like a nice guy with big dreams but he doesn't know sh*t about electronics didn't know how to wire the stomp switch up etc.
ANYONE who has ever heard of built the CA and TN versions KNOWS that they sound different.There was a second version of the Boss Tone, manufactured in Nashville Tennessee by SHO-SOUND. The two versions sounded exactly the same but the latter used a slightly different circuit than the original.
He must be saying that because there would be people asking "is this the CA or TN version?". Then he can just tell them it does not matter because they both sound the same.RLBJR65 wrote: ANYONE who has ever heard of built the CA and TN versions KNOWS that they sound different.
Watch, in a little bit he'll have both versions for sale. Then he'll claim "there's a little bit of a difference", months later "they sound completely different from each other".
- MoreCowbell
- Transistor Tuner
Information
vanessa wrote:He must be saying that because there would be people asking "is this the CA or TN version?". Then he can just tell them it does not matter because they both sound the same.RLBJR65 wrote: ANYONE who has ever heard of built the CA and TN versions KNOWS that they sound different.
Watch, in a little bit he'll have both versions for sale. Then he'll claim "there's a little bit of a difference", months later "they sound completely different from each other".
- RLBJR65
- Resistor Ronker
Information
There were at least 2 Nashville versions plus the CA.
The board is exactly the same for both TN models a few component changes though.
Schematic - https://img175.imageshack.us/my.php?ima ... ownoa8.gif
Model 6248 Board- https://img170.imageshack.us/my.php?ima ... ne3ml3.jpg
Unknown Model board- https://img170.imageshack.us/my.php?ima ... mpsfv2.jpg
I must have built 4 or 5 and spent countless hours on the breadboard experimenting with almost everything.
BTW If you have built 1 with metal film resistors and Poly caps, just for shits and giggles try building 1 with carbon comp and good .01 ceramic caps. You will be very surprised at how much better it sounds! Also low gain SI transistors are a must if you want it to sound right.
I honestly thought the guy had given up! He is a guitar builder (or so he says) and from what I have heard a pretty damn good guitar player.
I really need to email him we had a gentlemans agreement. If he's using my artwork he owes me at least a new Bosstone pedal
>Watch, in a little bit he'll have both versions for sale. Then he'll claim "there's a little bit of a difference", months later "they sound completely different from each other".<
Maybe Vanessa but he has good ears and really HATED the CA.
My guess is that there could be a BossTone BassTone
Or maybe a Mahoney SmoothDrive Which is a modded FoolTone FullDrive A modded clone of a modded clone of a...
Or perhaps a Deacy Amp If he found someone to wind the correct transformers and a heaping pile of good GE's.
The board is exactly the same for both TN models a few component changes though.
Schematic - https://img175.imageshack.us/my.php?ima ... ownoa8.gif
Model 6248 Board- https://img170.imageshack.us/my.php?ima ... ne3ml3.jpg
Unknown Model board- https://img170.imageshack.us/my.php?ima ... mpsfv2.jpg
I must have built 4 or 5 and spent countless hours on the breadboard experimenting with almost everything.
BTW If you have built 1 with metal film resistors and Poly caps, just for shits and giggles try building 1 with carbon comp and good .01 ceramic caps. You will be very surprised at how much better it sounds! Also low gain SI transistors are a must if you want it to sound right.
I honestly thought the guy had given up! He is a guitar builder (or so he says) and from what I have heard a pretty damn good guitar player.
I really need to email him we had a gentlemans agreement. If he's using my artwork he owes me at least a new Bosstone pedal
>Watch, in a little bit he'll have both versions for sale. Then he'll claim "there's a little bit of a difference", months later "they sound completely different from each other".<
Maybe Vanessa but he has good ears and really HATED the CA.
My guess is that there could be a BossTone BassTone
Or maybe a Mahoney SmoothDrive Which is a modded FoolTone FullDrive A modded clone of a modded clone of a...
Or perhaps a Deacy Amp If he found someone to wind the correct transformers and a heaping pile of good GE's.
Oh my lord! He hated the CA version? That's the one I loved...RLBJR65 wrote:
Maybe Vanessa but he has good ears and really HATED the CA.
That's the version [Bosstone] Pete Cosey used on Electric Mud (Muddy Waters)
RLBJR65 wrote: Or perhaps a Deacy Amp If he found someone to wind the correct transformers and a heaping pile of good GE's.
I did a couple of months research on that one Richard. If you want to know all secrets of the Deacy amp, pick my brain, pick my brain...
- soulsonic
- Old Solderhand
Information
I'm a little disturbed by the descriptor on the site "High Fidelity Audio ICs"
What kind of BossTone uses an IC?
Oh, and once again, a booteeker is claiming friggin' cheap-ass Alpha pots are some kind of a great thing.... If someone wants to impress me with fancy pots - howzabout using some Alps Blue Velvets? Or some nice industrial grade Clarostats? Or Allen-Bradley? Or CTS?
I mean c'mon, Alpha a boutique pot? These guys are clueless.
What kind of BossTone uses an IC?
Oh, and once again, a booteeker is claiming friggin' cheap-ass Alpha pots are some kind of a great thing.... If someone wants to impress me with fancy pots - howzabout using some Alps Blue Velvets? Or some nice industrial grade Clarostats? Or Allen-Bradley? Or CTS?
I mean c'mon, Alpha a boutique pot? These guys are clueless.
- RLBJR65
- Resistor Ronker
Information
To be truthfull I really don't like any version of the Bosstone. They are just to harsh for my ears. For fuzz give me a big fat mushy sounding GE FF and I'm in heaven! I guess a really talented player can make anything sound good
Vannesa I am kind of curiouse to know about the Deacy. Maybe it would be best to start a new thread though.
Soulsonic I did mention the guy didn't know sh*t
Vannesa I am kind of curiouse to know about the Deacy. Maybe it would be best to start a new thread though.
Soulsonic I did mention the guy didn't know sh*t
Okay here I go...RLBJR65 wrote:To be truthfull I really don't like any version of the Bosstone. They are just to harsh for my ears. For fuzz give me a big fat mushy sounding GE FF and I'm in heaven! I guess a really talented player can make anything sound good
Vannesa I am kind of curiouse to know about the Deacy. Maybe it would be best to start a new thread though.
Soulsonic I did mention the guy didn't know sh*t
- RLBJR65
- Resistor Ronker
Information
Okay if anyone is interested I added most of the VooDoo Bosstone values to my drawing. Got some gut shots but I don't have permission to post them.
https://profile.imageshack.us/user/rlnj ... nesym4.gif
The 1K added to the Attack pot is to prevent oscilation that you sometimes get when both pots are turned all the way down.
https://profile.imageshack.us/user/rlnj ... nesym4.gif
The 1K added to the Attack pot is to prevent oscilation that you sometimes get when both pots are turned all the way down.
- RLBJR65
- Resistor Ronker
Information
For the record, I would like to make it publicly known that I currently have no financial or other connections to BossTone or its owner(s). In the past some of my intellectual property was provided to them freely. I also do not anticipate having any future dealings with BossTone or its owner(s).
- Bernardduur
- Transistor Tuner
Thanks man!RLBJR65 wrote:Okay if anyone is interested I added most of the VooDoo Bosstone values to my drawing. Got some gut shots but I don't have permission to post them.
https://profile.imageshack.us/user/rlnj ... nesym4.gif
The 1K added to the Attack pot is to prevent oscilation that you sometimes get when both pots are turned all the way down.
Anyone know if the VL Superfuzz is close to this design?
'No more....... loud music.......'
Follow my love for pedals and amps on https://bernardduur.blogspot.com and https://www.instagram.com/bernardduur1
Follow my love for pedals and amps on https://bernardduur.blogspot.com and https://www.instagram.com/bernardduur1
- RLBJR65
- Resistor Ronker
Information
It's suposed to be a modded bosstone but I've never seen gut shots.