Kay - Fuzztone (F-1)  [schematic]

Discussion regarding early stompbox technology: 1960-1975 Please keep discussion focused and contribute what info you have...

Kay - Fuzztone (F-1)  [schematic]

Postby analogguru » 27 Aug 2007, 07:39

You won´t believe it, here some guts of a Kay Fuzztone for $475,-- :!: :!: :!: (Buy it now):
http://cgi.ebay.com/Kay-Fuzztone-60s-Fu ... dZViewItem

Here is the schematic:
Kay Fuzztone (F-1) schematic

As you can see it´s nothing else than a low-cost-version of the Shin-ei/Univox Superfuzz or Ibanez/Marlboro/.../..../ Standard Fuzz or Zvex Octane/2/3.

analogguru
There´s a sucker born every minute - and too many of them end up in the bootweak pedal biz.
analogguru
Old Solderhand
 
Posts: 3286
Joined: 26 Jun 2007, 14:58
Has thanked: 0 time
Have thanks: 112 times

Postby modman » 28 Dec 2007, 19:59

For the record - pics are gone
Winning bid: US $511.00 :shock:
"The whole point of diy is diy. It's not dsoiyathodtr - do some of it yourself and then have others do the rest" (paulc)
User avatar
modman
a d m i n
 
Posts: 4246
Joined: 19 Jun 2007, 17:57
Has thanked: 2886 times
Have thanks: 495 times

Postby Dirk_Hendrik » 28 Dec 2007, 20:04

Same buyer:
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0183425652

This guy definitely has too much money to spend.
Sorry. Plain out of planes.

http://www.dirk-hendrik.com
User avatar
Dirk_Hendrik
Old Solderhand
 
Posts: 4129
Joined: 03 Jul 2007, 09:44
Location: Old Amsterdam
Has thanked: 247 times
Have thanks: 984 times

Postby analogguru » 28 Dec 2007, 20:14

Hmmmm..... (another) pictures (of the same unit) are available here:

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0163915866

As you can see this italian guy is not alone cause he could sell this "bunch of sh*t" for EUR 207,01.....

analogguru
There´s a sucker born every minute - and too many of them end up in the bootweak pedal biz.
analogguru
Old Solderhand
 
Posts: 3286
Joined: 26 Jun 2007, 14:58
Has thanked: 0 time
Have thanks: 112 times

Re: Kay - Fuzztone (F-1)

Postby roseblood11 » 18 Jan 2009, 05:24

I´m just planning to built a kay fuzztone, but I can´t find all the required parts.

-Which transistor could I use instead of the 2SC644 (Q1)?
-Would the 2N3904 work for Q2-Q4?
-Can I replace the OA90´s with 1N60, 1N34a or 1N270?

regards, Immo
roseblood11
Opamp Operator
 
Posts: 1692
Joined: 23 Aug 2008, 15:21
Has thanked: 322 times
Have thanks: 299 times

Re: Kay - Fuzztone (F-1)

Postby Emanuele » 20 Jan 2009, 19:24

Has anyone built one without the filter knob array? Just the plain fuzz sound, or maybe a standard tone control..
Emanuele
Solder Soldier
 
Posts: 150
Joined: 09 Jan 2008, 11:16
Location: Italy!
Has thanked: 1 time
Have thanks: 0 time

Re: Kay - Fuzztone (F-1)

Postby roseblood11 » 18 Aug 2009, 19:42

Hi,

I´m looking for a veroboard layout for the fuzztone. Can anybody help?

Immo
roseblood11
Opamp Operator
 
Posts: 1692
Joined: 23 Aug 2008, 15:21
Has thanked: 322 times
Have thanks: 299 times

Re: Kay - Fuzztone (F-1)

Postby Solidhex » 18 Aug 2009, 20:33

I strongly recommend using silicon diodes in this pedal. it brings the output to a respectable level. The diode clipping and tone section with no recovery stage has very low output if you're wiring it for true bypass. Regular 1n914's sound pretty close to the germaniums in this circuit too. If you exclude the tone control you're missing out on a lot of cool tones. If you're building it as a standalone fuzz ( no treadle or wah casing) put a resistor ( 1k to 10k) between the first lug and ground of the tone control. That way the sound doesn't disappear when the knob is turned all the way clockwise. Its not a concern on the original since the end of the pot travel is never reached with the treadle.
Solidhex
Resistor Ronker
 
Posts: 262
Joined: 02 Apr 2008, 05:43
Has thanked: 10 times
Have thanks: 17 times

Kay Fuzztone...

Postby Fastnet » 10 Apr 2010, 11:21

Morning all,
I'm getting more obcessed by all things fuzz. I've a dud wah enclosure thats been laying around for a while and thought a good use would be the Kay Fuzztone... Although my soldering is neat and tidy I'm bottom of the class when it comes to turning schmatics into vero layouts.....
So, has anyone done a Kay with authenticity?
If you have can I be cheaky because and ask for a parts list as well...!
Any info greatfully received.....
Regards,
J.
"After silence, that which comes nearest to expressing the inexpressible is music." Aldous Huxley
or...
"Pog mo thoin!"
Fastnet
Breadboard Brother
 
Posts: 129
Joined: 30 Jul 2009, 09:57
Location: UK
Has thanked: 9 times
Have thanks: 3 times

Re: Kay Fuzztone...

Postby lolbou » 10 Apr 2010, 13:29

Fastnet wrote:Any info greatfully received.....


Use the search function first... :wink:

Don't seem to be any layout though, but seems like a light project to start with! :D

(Topics merged).
- Are you a mod or a rocker?
- Uh, no, I'm a mocker.
User avatar
lolbou
Old Solderhand
 
Posts: 2701
Joined: 18 Nov 2008, 22:38
Has thanked: 342 times
Have thanks: 233 times

Re: Kay - Fuzztone (F-1)

Postby roseblood11 » 10 Apr 2010, 19:05

roseblood11
Opamp Operator
 
Posts: 1692
Joined: 23 Aug 2008, 15:21
Has thanked: 322 times
Have thanks: 299 times

Re: Kay - Fuzztone (F-1)

Postby Fastnet » 12 Apr 2010, 12:24

:roll: I did use the search function first!
Why else would I ask for "ANY INFO GREATLY RECIEVED"!
Seriously though, have been checking out youtubes "how to etch a board" and not sure about all those chemicals.... On a scale of 1-10 how difficult is it to obtain all the necessary and achieve a working result?
J.
"After silence, that which comes nearest to expressing the inexpressible is music." Aldous Huxley
or...
"Pog mo thoin!"
Fastnet
Breadboard Brother
 
Posts: 129
Joined: 30 Jul 2009, 09:57
Location: UK
Has thanked: 9 times
Have thanks: 3 times

Re: Kay - Fuzztone (F-1)

Postby Scruffie » 12 Apr 2010, 12:34

Fastnet wrote::roll: I did use the search function first!
Why else would I ask for "ANY INFO GREATLY RECIEVED"!
Seriously though, have been checking out youtubes "how to etch a board" and not sure about all those chemicals.... On a scale of 1-10 how difficult is it to obtain all the necessary and achieve a working result?
J.


No idea but if you give me a day or two i'll try and get a vero layout for it done... no promises though (do you wanna give me an idea of what sized board to work to for your wah shell too?)
Scruffie
Opamp Operator
 
Posts: 1727
Joined: 13 Mar 2009, 18:59
Location: London.. ish, Uk
Has thanked: 27 times
Have thanks: 136 times

Re: Kay - Fuzztone (F-1)

Postby Fastnet » 12 Apr 2010, 12:41

Scruffie wrote:
Fastnet wrote::roll: I did use the search function first!
Why else would I ask for "ANY INFO GREATLY RECIEVED"!
Seriously though, have been checking out youtubes "how to etch a board" and not sure about all those chemicals.... On a scale of 1-10 how difficult is it to obtain all the necessary and achieve a working result?
J.


No idea but if you give me a day or two i'll try and get a vero layout for it done... no promises though (do you wanna give me an idea of what sized board to work to for your wah shell too?)


:applause: :hug:
Oh you little gem!
I'll be using an old Dunlop volume pedal shell... A crybaby essentially but this one's silver and ammusingly say's "HIGH GAIN"! Bought on ebay for a pittence... No surprise either as for a volume it was useless, the treadie wouldn't stay still so ended up forking out for an EB Jnr!
Regards,
J.
ps. can it be true bypass and DC powered as well!
"After silence, that which comes nearest to expressing the inexpressible is music." Aldous Huxley
or...
"Pog mo thoin!"
Fastnet
Breadboard Brother
 
Posts: 129
Joined: 30 Jul 2009, 09:57
Location: UK
Has thanked: 9 times
Have thanks: 3 times

Re: Kay - Fuzztone (F-1)

Postby Scruffie » 12 Apr 2010, 13:31

No worries :hug:

Okay... i've done a quick one :whappen: , completely unchecked and i'm a bit sceptical of the output section but give it a go for now... bit tight 'cause I was aiming for a 1590B fit but failed Miserably.

(True Bypass & DC it to your hearts content)

Edit: Re-Uploaded to Fix Missing Track Cuts
You do not have the required permissions to view the files attached to this post.

For this message the author Scruffie has received thanks:
Fastnet (31 Jan 2011, 00:31)
Scruffie
Opamp Operator
 
Posts: 1727
Joined: 13 Mar 2009, 18:59
Location: London.. ish, Uk
Has thanked: 27 times
Have thanks: 136 times

Re: Kay - Fuzztone (F-1)

Postby Fastnet » 12 Apr 2010, 14:35

Scruffie wrote:No worries :hug:

Okay... i've done a quick one :whappen: , completely unchecked and i'm a bit sceptical of the output section but give it a go for now... bit tight 'cause I was aiming for a 1590B fit but failed Miserably.

(True Bypass & DC it to your hearts content)

Edit: Re-Uploaded to Fix Missing Track Cuts


Wow that was quick!
Quick few Q's...
What is it you're sceptical about with the output section?
How did you make this vero layout? By which I mean, did you "read" the schematic and "translate" it to vero? because I've seen the schematic for the SDD3000 preamp and I've been wondering about making that since I saw the thread by "Analogguru" a while ago...! :wink: :hug:
Regards,
J.
"After silence, that which comes nearest to expressing the inexpressible is music." Aldous Huxley
or...
"Pog mo thoin!"
Fastnet
Breadboard Brother
 
Posts: 129
Joined: 30 Jul 2009, 09:57
Location: UK
Has thanked: 9 times
Have thanks: 3 times

Re: Kay - Fuzztone (F-1)

Postby Scruffie » 12 Apr 2010, 14:43

Indeed it was quick, didn't have much to do this morning, but quick means it should be re-checked.
What is it you're sceptical about with the output section?

I'm just sceptical that I got it right is all, just needs going over really, by someone else with a fresh set of eyes preferably.
How did you make this vero layout? By which I mean, did you "read" the schematic and "translate" it to vero?

Yeah I took Analoggurus schematic and converted it to Vero in the usual fashion, I didn't pluck it from thin air :lol:
here's a tutorial for converting Schematics to boards etc. for future reference...
http://www.beavisaudio.com/techpages/Sc ... ToReality/
I've seen the schematic for the SDD3000 preamp and I've been wondering about making that since I saw the thread by "Analogguru" a while ago...!

If you give the SDD3000 a shot on vero i'm sure someone here could look it over for you :wink:
Scruffie
Opamp Operator
 
Posts: 1727
Joined: 13 Mar 2009, 18:59
Location: London.. ish, Uk
Has thanked: 27 times
Have thanks: 136 times

Re: Kay - Fuzztone (F-1)

Postby Fastnet » 12 Apr 2010, 14:50

Thankyou thankyou thankyou!

I now have a pile of work to get through from this morning but I'll be reading through the Beavis tonight....

Greg G said to me a while back that this place is full of very nice people.... So glad to be part of the clan!

Cheers,
J.
[smilie=bowdown.gif] [smilie=bowdown.gif] [smilie=bowdown.gif] [smilie=bowdown.gif] [smilie=bowdown.gif] [smilie=bowdown.gif] [smilie=bowdown.gif]
"After silence, that which comes nearest to expressing the inexpressible is music." Aldous Huxley
or...
"Pog mo thoin!"
Fastnet
Breadboard Brother
 
Posts: 129
Joined: 30 Jul 2009, 09:57
Location: UK
Has thanked: 9 times
Have thanks: 3 times

Re: Kay - Fuzztone (F-1)

Postby Fastnet » 12 Apr 2010, 14:54

Sorry one last Q.... What rating (voltage wise) would you choose for the components? ... Who would you use? Was going to do an order with CPC...
Cheers,
J.
"After silence, that which comes nearest to expressing the inexpressible is music." Aldous Huxley
or...
"Pog mo thoin!"
Fastnet
Breadboard Brother
 
Posts: 129
Joined: 30 Jul 2009, 09:57
Location: UK
Has thanked: 9 times
Have thanks: 3 times

Re: Kay - Fuzztone (F-1)

Postby Scruffie » 12 Apr 2010, 15:11

Fastnet wrote:Sorry one last Q.... What rating (voltage wise) would you choose for the components? ...

http://www.beavisaudio.com/techpages/Caps/
Beavis wrote:There are hundreds of different types of electrolytics. Typically, you are going to make your choice based on value in farads (see "Units of Measure" below) and voltage rating. For safety, it is a good idea to get voltage ratings at least twice your circuit’s input voltage. So if you are building a 9v stompbox, 18v-rated electrolytics would be good.

So just make sure your electros are around double the voltage of the input (16v is usually the rating I see that would be safe) and most people usually use 1/4 Watt Resistors but that doesn't really matter for stompboxes.

Don't Forget that the transistors and diodes listed are the ones used originally, these pedals are very old so you're probably gunna be better off using cheaper modern equivalents than searching out the original parts... such as 1N34a for the Germanium Diodes (nothing stopping you trying silicon ones such as the 1N4148 or 1N914 though but they will change the clipping/tone of the the fuzz and in certain pedals, wont work, but I think they'll be fine here) and any low hFe NPN transistors such as BC 239 B, BC 549 B, BC 550 B, 2N3904, 2N5088... take your pick.
Fastnet wrote:Who would you use? Was going to do an order with CPC...

http://www.beavisaudio.com/techpages/buildstuff/

I'm in the U.K so personally, i'd use http://www.bitsbox.co.uk, if I was ordering outside i'd use a combination of http://www.futurlec.com for cheap parts and http://www.smallbearelec.com for harder to find parts and enclosures etc.
Scruffie
Opamp Operator
 
Posts: 1727
Joined: 13 Mar 2009, 18:59
Location: London.. ish, Uk
Has thanked: 27 times
Have thanks: 136 times

Next

Return to Vintage Stompbox Corner ( ... - 1975)

Who is online

Users browsing this forum: No registered users and 9 guests