Arion sch-z too much bass

A forum devoted to mod, tips and suggestions for upgrading and rehousing your VERY CHEAP commercial stompbox to near boutique excellence.

Arion sch-z too much bass

Postby bm13 » 11 Aug 2018, 08:35

Hey,

I recently bought a Arion Sch-z and love that pedal since then!!
The only problem is that it adds a lot of bass to the mix and I can't get it out with the Tone knob.

'Found the schematic here on the board:
download/file.php?id=13076&mode=view

Does somebody have ideas on how to get rid off that bass boost??
Or are there already some mods for that problem?

Many thanks,
bm13
bm13
 
Posts: 11
Joined: 11 Jan 2012, 12:04
Has thanked: 1 time
Have thanks: 5 times

Re: Arion sch-z too much bass

Postby phatt » 11 Aug 2018, 09:58

Yes mine had the same problem, way too much bass. :roll:

It's been a long time but look at VR3 (Tone pot)
I can't recall exacts but I'm fairly sure I just lowered the value of C19 or C20,, or maybe it was both?
If you want exact values I used you will have to wait till I pull the back off as I'm using the pedal for the next few days.
Phil.
phatt
Transistor Tuner
 
Posts: 1004
Joined: 04 Aug 2010, 06:17
Location: Morayfield SE Qld AU
Has thanked: 0 time
Have thanks: 247 times

Re: Arion sch-z too much bass

Postby bm13 » 12 Aug 2018, 13:59

Thanks phatt, that would be great!!
bm13
 
Posts: 11
Joined: 11 Jan 2012, 12:04
Has thanked: 1 time
Have thanks: 5 times


Return to Pimp-My-Cheap-Pedal

Who is online

Users browsing this forum: Yahoo [Bot] and 5 guests