I ve try this, nothing better....!

Thanks. I ve check the soldering and Q3 looks correctly instaled. The signal is really small after the R8 and dont arrive at Q3 and C8... R8 look ok (47k). I ve try To put a bridge directly from R8 to C8 and now the signal go to the Q3 and the transfo... and after de germanium diodes but not a t the...

Hi, I ve made an audio probe and try to find something. I lost the signal after the R3 on one way, I tested it and it s ok 675k.... On the other way I lost it on the C3.... I ve try to change C3 and C2 but nothing better. Thé soldering are tested ok and no problem with legs in support of C3.... The ...

Yep
I ve just try this option.... nothing better...
Yes the ground are like you say.

Next way audio probe....

Thanks

Thanks. I ll try the audio probe.... Look at my switch. I first used the circuit made for but as no sound came out, I had a doubt about the meaning. as I had broken it by desoldering it to change direction I tried this way which follows the diagram of the circuit made for. https://i71.servimg.com/u/...

I, I ve already use the build doc for made it. I ve desoved the two diodes and test them. They are ok and I ve solded them correctly. Thé other point is the transfo, that maybe I ve put in bad way, but I ve put the P in front of the P wrote on the board....? See the pedal. https://i71.servimg.com/u/...

Hello, I m a beginner in diy kit pedal, and I ve try the octavius kit from pcb mania. I have some problem like no sound when I activate the pedal. First question, how should I put the diode 1n34a ? the two lines on the side indicated on the circuit? it seems polarized upside down? and I have a doubt...