this project is very interesting up for this

:applause: Sikor, Thanks!! Bro, why won't you let your mate plugzzzz chime in here to provide the schematic?. :thumbsup Calling plugzzzz, shed some light man.. :D I'll save ya some trouble. All IC based except for the boost stage, which is a npn boost into a big muff style control (cream/crunch). T...

how about the trace side of the PCB

had the same problem what i do is i turn the rate/speed of the modulation full that solve it.... another problem i have is that the delay has a very small amount of overdrive specially if i pick the strings hard is there a way to fix it thanks Hi Plugzz, I guess you are talking about the aqua puss ...

I checked the soldering and that turned out ok. Changed the LDR (tried a few) and that made a difference. I can now use the whole range of the depth pot without the delay cutting out. That is good, but with the depth pot down I still have modulation. Is there something I can do to have all the modu...

the black openhaus clone i did has 2n1306 and i dont hear much difference between the openhaus that has 2n388... about sir abfackeln his build has more mids mine doesnt... it sound close to the youtube demo the first openhaus i did had the same result abfackeln openhaus has and i notice that used a ...

my clones

neoflox wrote:… and how did you get the enclosure shiny like that?

chrome plating shop

really nice chrome finishing! remind me something like mia tubezone. how much gain that you get from these pedal? really wet? whether you use all the same components as the schematic? thanks. component are all the same except i used 2n388 instead of 2n1306 what can i say this is the ultimate distor...

heres my clone



its one noisy pedal

im very curious about this pedal the PCB looks like BYOC TS but with extra capacitors... tube demos sounded great on all of them has anyone here had a chance to see the insides traces

project progress just waiting for the switches

anyways on the GE trannys can i use 2n388 it has the same pinout and HFE range compare to (2n1306) is 2n1306 the verified GE trannys

culturejam wrote:How much were those knobs? I'm cringing, because knobs like that usually run about $4 - $5 each.

3$/each

openhaus clone in progress

i just trace the pcb layout using the pictures that are here... i dont know if i miss some traces but im sharing what i have


NOTE: Edited by moderator. See post below.

ejbasses wrote:hey man! hows it goin? its the blue one.

doing fine bro! nagkikita paba kayo nila turi at leech balita ko bigtime kana

hey ej its me stephen ....if im not mistaken that valveboy is turi's hehehe..which version was this the ugly gray one or the blue one???

RonaldB wrote:Hello,
Great project and thanks for all the effort.
Can someone please help me getting the LND150N3 easy. I checked Mouser but shipping costs for 4 off these cost me $20

Maybe there is an other way?

thanks
Ronald

+1

any other option where i can get this shipping cost is sick

I need help identifying this fuzz board. The seller whom I bought this from said this is some Dunlop Jimi Hendrix Fuzz Face from the 90s. Maybe someone could point me the right schematic for this and how this should be wired so I can get this to use. The electrolytic caps are 2.2uF, 22uF and 100uF....

riesling wrote:

roseblood11 wrote: Is someone working on a layout with pcb-mounted pots? That would make things a lot easier...
regards, Immo

Something like this?

is this verified???.