The knobs look suspiciously like a Boss BD-2 + an MXR Micro Amp?

the Way Huge enclosures are a good size. IMHO.

PurplePeopleEater wrote:Can we get back to wire, resistors, and caps now ?

Seriously.

I dont own any of his pedals and I dont know that I would share that kind of stuff if I did. This forum seemed rad at first but now it seems bitter and spiteful. If you want to trace some toneczar pedals, youre best bet is to get on them list and wait a few months.

I've got some of those 1n60s and they sound great in simple circuits like this...

looks pretty darn good!

What I mean by "I tape over the design", I mean once the transfer is made, to make the rest of the box impervious I'll paint everywhere that I don't want etched. and to keep from painting my open areas on the mask I'll tape them up, then remove the tape for etching. I think my tendency is ...

I use PnP. then I touch it up really well, thin or missed spots in the mask get enamel, then I painters tape the design and give the whole thing a few coats of flat black. delicate etching after that. only a few seconds at a time between rinses.

I don't know if Mark's is down for good, but if it is, I'll try to get a new photoessay up sometime in the next few weeks.

Recently did this one for a forumite's Ram Head project.


kinda wanted to keep it

How this can be achieved ? Very easy, you need one jack where the speaker cable is plugged in - without the speaker, high impedance.... Then you have a generator of about 30kHz..... a trigger circuit.... and an amplifier like the MXR microamp. Just throw in a free fire extinguisher and you've got y...

I've breadboarded a MKI from the mains schematic... and after a few trannies tried, I have an approximation of the sound I hear in 1966 Jeff Beck Yardbirds stuff. Has anyone recorded clips of this that I can compare to?

Rock On
-Nate

markm wrote:I'm currently working on a PCB layout for the 2-in-1 for the guys that still etch!

we're out here!

PBFX you can use Bancika's DIY Layout Creator to do a Vero from the Schematic. Here's one GillesC did
http://www.gtechblues.com/Projects/Fat_Boostered.pdf

I haven't verified this, I did a PCB from the GGG layout for mine. Great sounds.

New Sensor is the company that makes those. I believe they also Manufacture EHX/Sovtek products

that inductor is odd looking, may just be the lack of a plastic casing.

thanks for the pictures guys!

I've done a quick search around for this one... but haven't found anything... anyone seen inside one of these?

briggs wrote:I, personally, think they are ugly as sin.

x2.

put this together yesterday with the vero layout. mine biased up right away with the values shown. mean with a bass. MEAN.

SOULSONIC - i have some of the gt313 if you want to trade a few

http://datasheetarchive.com
usually has what I need.