Thanks for the replies. Aread there any products that will do something like this? That you guys are aware of?

Hey Guys,

Quick question, if I have 10V at 500mA running into a 5V Regulator (rated at 2A for argument sake) does this mean I have 5V at 1A available (nominally) on the output of the regulator? Any input is greatly appreciated.

Thanks!

2.5V is crazy high, must be thudding pretty loud! I would definitely change the output capacitor. Especially if it is a Tant, I have had a few leaky ones myself :) I'm rather skeptical about adding the 2.2M on the output, surely this would affect the output Impedance? :hmmm: I would much rather have...

Hi, Very cool little pedal! I have built it and all is working well. I have noticed the the tone control has virtually no effect on notes played on mt high E string, I think its a clever tone design having 2 low pass filters and panning between them using a 50K pot, well thats what it looks like to ...

Should this eliminate ground loop issues with 2 amps? Or do I need transformers.

Anyone?

https://desmond.imageshack.us/Himg853/scaled.php?server=853&filename=img0870n.jpg&res=landing https://desmond.imageshack.us/Himg841/scaled.php?server=841&filename=img0869r.jpg&res=landing https://desmond.imageshack.us/Himg96/scaled.php?server=96&filename=img0868zm.jpg&res=la...

Im not sure how t post photos sorry do you have an email address?

So, I replaced the pot, it was faulty and wasn't providing any resistance. Now as for the heavy gated sound and the massive voltage drop in the diode lift position Im still at a loss. Can you point me in the right direction? Where and what should I be testing? Much appreciated

bigorangefan79 wrote:Measure impedance across pins 1 and 2. Turning drive knob should change it from 10k to just over 1meg ohms. if it reads more than that or does not change then your drive pot or something around it is not hooked up right.

Thanks, will try tonight and back to you with results!

I was going to post this in the debug section however it appears to be locked out!? Any who Im have some trouble with my layout and need some help. My pedal works fine when the 1N914 diodes are engaged but whenever i toggle over to the middle position (diode lift) I get this heavily gated sound. Als...

I have built this pedal and am loving the tone but have one quick question... would I be able to use a 18V power supply? My polorised caps are rated at 25V... im really keen to do this, do I have to modify it in anyway?

Thanks!

Anyother ideas about the high pitch squealing?

Ok whenever I turn the gain right up I get a really high pitched squeal noise any ideas? Also I changed the tone value and it makes no difference. Sorry about the questions im a noob

This was my first build and it sounds great howeve my tone knob doesn't work very well. I'm thinking it should be 20K and not 25k pot? Also what kind of switch is the SPDT? Is it on-off or a on-off-on? Thanks for you help in advance

lautmaschine wrote:Ok - I'll just post it direct, but my earlier comments still stand.

Has anyone had the chance to varify this yet?

Fantastic this looks great! I just wanted to turn my mono signal into stereo and run it to 2 amps so this looks perfect! Any chance of a layout Vero Board Layout? Not very good with schematics! thanks heaps guys!

Just a quick question.... the two output jacks shown on the left.... they look like mono jacks...is this right or are suppossed to be stereo? Just wanna clarify

Hi All,

I'm very new to the world of DIY effects, I'am wanting to turn my mono signal into a stereo signal and split. So mono input, dual stereo output. No footswitch required. Just wanna know how to do it. Also Im not very technical so keep it simple! Many thanks in advance.