okay, Manfred. noted. so, here you go guys!

hahah no worries. thanks matey!

hi, attached is the vero i just did based on the schematics by both our friend TheLemon and Manfred if anyone's interested. i omitted the 1K resistor that was circled in red, and i referred to Mark's DRD vero layout throughout. i've checked it against the schematic, and i'm fairly confident that it'...

hi MoonWatcher and mictester, sorry for missing your post earlier, Moonwatcher. The only tricky part would be wiring it up to work with both channels, but you might want the voicing different for each anyway. that made sense. yes, maybe two different tonestacks wired on each channel, huh? cool, i di...

after hours of reading up and researching over the net, and comparing schematics and layouts, i think i finally get it now. i think! :lol: am i right to say that the In goes to the (-) side of C8 and C15, and Out goes directly to both JV 3 and BV 3? or are C8 and C15 supposed to be omitted when addi...

oh i forgot to make a change on the vero during last edit; S1-8 should go to lug 1-q on board. sorry about that.

thanks again, ROG! i liked the clips on their site and also the video demo on youtube, and would love to build this in the future. so i made a vero for myself and i thought i'd share. :mrgreen: i'd love to implement the bmp tonestack(this one: https://i135.photobucket.com/albums/q150/brushthrower/bm...

hi guys, attached is the vero which i just did based on the schematic from their site. (thank you, ROG! :mrgreen: ) here's the BOM: C1: 220uF C2: 150pF C3: 220nF C4: 220nF C5: 10nF C6: 10nF C7: 22nF C8: 150pF C9: 220nF C10: 220nF C11: 150pF C12: 220nF C13: 150pF C14: 470pF C15: 1nF C16: 220nF C17: 2...

i dont know if anyone's interested but here's a vero which i just did based on the schematic by boodle. i omitted the presence switch and connected ground straight to lug 2 of the pot. not sure if this would affect anything though!

here's a vero layout i just did based on the schematic for anyone interested. unverified still. could anyone kindly go over it to see if i missed anything?

Here's a vero layout: again..not verified!

i just watched the video demo on youtube and this pedal really sounds interestingly good! i just did a vero layout for myself and i thought i'd share.. though it isn't verified yet!

hi, i just did a vero layout for this if anyone's interested..
not verified though!

fantastic post, nocentelli! i learned a few things today, thanks to you!

he he yes, i was contemplating at first whether to include the LED resistor R5 or not because it wouldn't be flat down. but then i thought that i'd rather that than having it "hanging" somewhere in and around the enclosure. oh, and yes, i'm definitely inspired by mark and sabro! :D kudos t...

i did a bit of search on the internet and i came across this interesting input by someone from another forum, and i thought i'd share with you guys too.. quote from Dragonfly of diystompboxes.com(source https://www.diystompboxes.com/smfforum/index.php?topic=41026.0;wap2): depends on how you like you...

hello everyone, i did a search before this but couldn't find a thread relating to this circuit solely. so, i decided to make a new one. sorry if i caused any inconvenience to anyone. okay, although i know there are a few verified layouts floating around already, but as part of my learning process(pl...

hi, i'm here to report that i built mine with success. i did not encounter the problems that our friend, ringleader, mentioned. and i too built mine using the layout posted at tagboardeffects.

hi, i just did a vero layout according to the latest schematic which lead2203 posted. i'm a newbie and this is only my 2nd personal attempt at producing a layout, and i believe my wiring for the switch is wrong :oops: would be great if anyone could kindly take a look at my layout. :P thanks! https:/...

hi sonicmojo, may i ask where can one acquire those wires,the ones with the black "thingy" at each end? i've been looking for them for quite some time already. do they have specific names for me to go to my local hardware shop to ask/make an enquiry? sorry, noob here. i tried describing to...