Hi, I worked it out.
On the layout copy, the 3rd pad in is not a ground pad, and is not joined to th ground pad to the right.
The 3rd pad in from left is 9v, and there is a topside trace that connects to diode (going to ground), and 100 ohm resistor.
Cheers, Rhandy

Hi, lots of hard work done here, but I can’t see a pad for the 9v connection on the PCB layout copy.

Also, on the vero layout, 9v enters the PCB and passes through a diode, then a 100 ohm resistor, but in the schematic the first diode goes to ground.

Cheers, Randy.

Hi. Great work but, schematic doesn't match pcb, pins 6 and 7 not joined. I haven't read through complete posts but, just noticed it. Cheers.

i also said "I DO" to my wife. now that was a mistake, just joking.

"looking at the pcb the yell,grn, and blu wires on their own are the boost"

I MEANT MIDDLE, not boost

there's two resistors under each side of the greeb bp cap, i've made a rough schematic (the tone is similar in architecture to some of the xotic pedals but with a mid section). for tones wires: yellow are is 3, green are is 2, blue is lug 1. looking at the pcb the yell,grn, and blu wires on their ow...

i have got two heads, and not a brain in either of 'em

i've started work on it. i've done a pencil drawing of the pcb etc and i've kinda worked it out but, i've got some other stuff to finish first.

i'm hanging to finish it though.

hi,

i'm still building you one but, i've got some other jobs to do and life gets in the way of things sometimes.

cheers.

hi, i just saw you got it working, that's awesome.

the 1k resistor is my fault, a typo.

hi,

i'm not sure what's going on for you guys but i've built a few of these and they all worked.

i'm going away for a short holiday but when i get back i'll post a video of one.

i really wish i could help more.

good luck, i hope you get them working.

hi, if you send me a mailing address i will build you one for free. i've got some other builds to complete but, if you are willing to wait 4 weeks i will send you one. for now i'm not sure how to help, maybe replace the 1m potand 47k resistor with a fixed 470k resistor (build version one) and work b...

http://www.takkyparts.com/

the fuzzy master

hope this helps

hi,
don't stress or worry, i'll do a better drawing for you over the next day or two.

no worries mate, your english is fine.

cheers.

p.s.

version II has the 5M pot and 47K resistor in series.

for version I, replace these with just a 470K resistor.

i've made it both ways, and it is funking awesome.

cheers.

version II

hi, sorry i haven't done this, life gets in the way of things sometimes.

i will try really hard to find time and post parts placement by the end of the week.

cheers.

tassie mercury cider, nice.