dap9 wrote:This may be a stupid question, but what is meant by "high gain" for the BC109? I have a few 109s here and just got a multimeter w/ hfe function so what should range should I hope for?

the BC109C.... i think it's 400-500

devastator wrote:Yeah I found that since I posted my message.

the bigger issue is to find 100ohm pot to have an external pot. But I think I found one at Banzai.

you can also use a bigger value pot and apply a resistor in parallel

^ great!

check this out

Hi I've just received a Chicken salad that I want rehouse in a Hammond box . What are the values of pot ? I can't read that inside. I think the dual pot (speed) is a 100KC and the trim is 101 ( I think that corresponds to 1K ?) but I don't know the "intensity" value. you can always measur...

from otside looks like this... https://img11.imageshack.us/my.php?image=wooden3.jpg https://img29.imageshack.us/my.php?image=wooden2.jpg https://img9.imageshack.us/my.php?image=wooden1.jpg sound is like this http://www.box.net/shared/pej8xjcmuo http://www.box.net/shared/e6mel5myx8 boris :hmmm: Am I...

The 100k log is Drive and the 10k log is Volume. Indeed about the 10k linear, but Sag is also adjusting the bias of other transistors. Who said there was nothing between the first and last stage? The plot thickens. Don't get too excited about this circuit. Like so many others, the schematic doesn't...

Man, I just got a 1790S from Small bear and it's a little bigger than I want it. So add another dude going the Road Rage route. Is that one the "Large" box? And does anyone want to share a drill template? It's not a biggie - I don't actually have the board mount-type pots, but I could pro...

yeah i just ordered 4 road rage enclosure just to test them out. They are pricey that's for sure

remove switching circuit remove the brown wire (LED) remove orange wire add 4.7M to input (blue) add 100uF electrolytic to 9V (green) and add diode protection exchange pots (all 50k). Jumper the legs on the volume pot ...grounding points that's pretty much it. If you need the schematic, give me a sh...

couple of pointers for rehousing the tuna melt. The legs on the speed pot are ground points, which are disconnected when you remove the pot. So you need to jumper them together. The tuna melt is a relatively hard rehouse if you try to bypass the buffer. You can force it to be on, and throw a looper ...

Nothing special, just a tuna melt (good trem by the way) rehoused with true bypass with expression pedal capability which makes it really fun to play.

would be great to get another order going

I was honestly quite surprised that he was willing to take these, I can contact him to see if he'll take a higher-res picture of the side with actual components on it but there's a pretty good chance this is the best that I can provide. Anything I can do to these to try to make them better with pho...

Cow4prez your comments slightly confused me there... ? but if you are still looking for torchys box of rock vero/strip link it is in my mega upload. thanks, I'm not looking for anything in particular. I have just been wondering what happened to torchy in general and didn't realized what happened un...

Hm didn't see this thread. I was wondering what happened to torchy. It's too bad that he got upset and pulled his stuff.

can you post the link?

shooto wrote:

Cow4prez wrote:i have the cd, and it doesn't track well imo, not as well as the foxrox octron at least.

^ you're comparing a $30 to a $200 pedal...really, for $30 pedal, it tracks pretty well-

well you didn't say that did you?

i have the cd, and it doesn't track well imo, not as well as the foxrox octron at least.

http://fulltone.com/catalyst.asp the first person to degoop (if goop is present), trace and reverse gets applause. I like his descriptions :lol: Fuzzes can be a powerful thing in the right hands....BUT ....they are one trick ponies, can't do even a bad impersonation of an overdrive or clean boost .....

what kind of 3pdt is that?