Thank you very much for your answer, there are things that I share others that I do not think are like that. When you make a pedal, the operational one helps a lot to find the sound, an rc4558 is very different from a lm833, the sound obtained in each differs a lot. In this case I received lf353n to...

hi, does anyone know if there is difference between LF353p vs LF353n? sound different really? They tell me the LF353n has more gain... What should I look at in the data sheet?

Is there a post or a web, where they indicate the type of sound they deliver, the different and better known ics?

thanks

[ Image ] Your best bet would be a graphic eq pedal and you can tweak the gyrators if the frequencies are not spot on. ok thanks for answering, but is there any way to achieve that with a tone stack? Sorry but NO!!! I have no idea how to get to those hz with components Because it can't be done with...

FiveseveN wrote:[ Image ]

Your best bet would be a graphic eq pedal and you can tweak the gyrators if the frequencies are not spot on.

ok thanks for answering, but is there any way to achieve that with a tone stack?
I have no idea how to get to those hz with components

Hello, someone can tell me how to achieve a 3 band tone control, with this same frequency, which gives the parametric seen in the image. I want to take it to an anaglogic pedal with a good tone stack Is there any way to achieve it or imitate it? http://www.imagenonline.com/imagenes/1/814-27d6cc3c481...

287m wrote:Search rullywow diptrace library
You can message him in mbp or nathan vigilante in diysb
Iirc, they have the lib

Or maybe message BuGG pedalpcb?

thanks

Hi, is it possible to import the MB eagle library to Dip Trace?
someone knows if there is any library like the MB for Dip Trace, I'm missing everything, switches, jacks, pots, and all the parts.
someone who can help me?
Thank you

If (like me) you experience strange behavior when in boost only mode and turning the volume of your guitar down then consider putting a 10K between your guitar and the input of the Boost section. like this (Rx): Bogner La Grange modified Boost.JPG You could also consider to put Rx after C6 instead ...

hi, where can I get these pots or similar, that have long shaft, in usa?

like this: https://www.thonk.co.uk/shop/ttpots/

It seems that no one knows what a change in this version!

Check out from the minute 10.20 the noise there is very ugly! shhhhh
Pt2399 degrades the signal

Hi, as I can do to increase the gain and do not make noise oscillation? Also, closing the potentiometer guitar, I generated a lot of noises. If I leave the 1k gain no problem. Is there any solution for this? wants to have more gain, more sustain Q1 2n3904 / Q2 2n2222A or 2N4401 These were the best r...

Well you are not alone,, I have no doubt somewhere on the planet someone makes good quality switches but I've never been able to find them. :scratch: @ " roseblood11" Those are the common units which may well be the switches *A1full* already has and although they might look ok they are pr...

roseblood11 wrote:https://www.ebay.com/itm/LOT10-3PDT-9-p ... 1162714262

What is the difference with others? all look the same.
as knowing that work well? if the problem is with the months of use, they begin to malfunction.

Hello I ask a question, the switch 3PDT, where I can know that the product is of good quality before buying? for the price, I do not think so! I have failed .. Buy from Daier 20 units, and I have many problems, and I buy in Mammoth problems, eventually fail. Anyone know of any Chinese seller that go...

Someone known to have modified the circuit to sound bigger? more low end?
the sound is very good the second version, much higher than the first

Deadastronaut jamming on his prototype with 4 PT2399 delay prototype on breadboard. https://www.youtube.com/watch?v=cvgUkzOQNCo Another example is madbeans Zero Point SDX Delay https://www.youtube.com/watch?v=6KKDvEWruC8 Another one: cpm's - delay over the top PT2399's http://www.soundclick.com/ban...

Do you mean one on top of another, wired pin for pin? No. I haven't tried it, and it's unlikely to work. It also wouldn't reduce the noise.... I've found that if you give about 150µs pre-emphasis on the way in and the corresponding de-emphasis on the way out, you reduce the noise significantly whil...

Hello there any other integrated as the PT2399 to make a delay? I have not found any, except the old giving a low repetitions.

is True, the sound is like Bsiab or pinnacle, but noticeably improved!
besides the eq is fantastic.
as I remove the black epoxi, to see the circuit and components?