Hi
I'm sorry but i can not understand how to do the TB mod.
I bought an arions schz but i really can not understand the TB mod; how do i have to wire the 3pdt?
Please help
Thank you
hot

Hi
Where can i find the diy ready version?
Thank you
hotguit

nobody?
hot

Hi i modded my 74 script reissue with dc jack according to xenrelic schem (see pdf in previuos page); the unit works perfectly but i noticed that there are more highs and the tone is not so warm and full using it with dc jack than using it with battery. This mod should not alter the tone at all (or ...

Hi
yes, i posted the rev 1 which is a wrong version
input cap is a 0,022 (type error on layout rev 1) and so for R5
Replace R5 with a jumper and replace the jumper nera R6 with R5
Mine works perfectly and sound as it should
sorry
hot

Hi
has anybody info or a schem about it?
thank you
hot

Hi
R12 is 1K CC (carbon composition)
That pcb works perfectly
bye
hot

Hi everybody
Here i attached the layout and the pcb of the Boiling Point
it is BUILT AND VERIFIED. It works perfectly and sounds as it should.
It fit is a small Eddystone enclosure.
Have fun
bye
hot

LAYOUT NOT VERIFIED - IT DOS NOT WORK Hi here is the layout for boiling point based on schem on page 3 I built it and it does NOT work It seems ok to me but it does not work. It is quite as a grave, no sound at all (neither ssshhh or hum or anything else; absolute silence) So can anybody take a loo...

this project does not work
i'll redesign it
hot

1) wrong transistors orientation
2) wrong drive wiring

hot

No way
i can not make it work
HEEEEEELLLLPPPPPPPPPPP!!!!!!!!!!!!!!!!!!!
hot

Hi
I have re-checked the layout comparing it with a Landgraff DOD's working layout and it semms to me that the layout is OK.
Thare must be any error in populating the pcb or any bad component (maybe any electrolitic or tantalium cap)
I'll let you know
Hot

nobody wants to take a look at the layout?
hot

I made it modyfing a landy dod layout.
can you explain?
thanks
hot

LAYOUT NOT VERIFIED - IT DOS NOT WORK Hi here is the layout for boiling point based on schem on page 3 I built it and it does NOT work It seems ok to me but it does not work. It is quite as a grave, no sound at all (neither ssshhh or hum or anything else; absolute silence) So can anybody take a look...

no layout for this pedal?
hot

nobody?
hot

Hi i'm modding my dunlop "classic" wah and i want to put inside a clyde mcoy pcb replica (my wah comes out with a smd pcb so it is impossible modding it without replacing the pcb) the problem is that the pcb replica (i bought it from a guy in England) is designed without dc jack and led. A...

Unless I've got an obvious space on the vero which I could use for it, I really don't bother but it's up to the individual - you could always solder a cap straight across the dc adapter if you wanted to keep it off-board. I'm reasonably confident about the quality of my power supply so it doesn't b...