Here's a perfboard layout that I built from tuemmueh's schematic. I ended up using some of the values from V1 and some from the other versions. The volume pot is mounted to the board in the middle but I think it's transparent enough to see everything behind it. All pots are from the underside. I ju...

modman wrote:There are a lot more to come as well as a preliminary schematic that left everybody utterly disinterested.

Thanks for all of the hardwork!!
I wonder if de-gooping pedals is like revealing magic tricks - once you know how it is done, the magic is gone.

There was some concern about the trimmers on abfacklen's list being too big at 9mm (he did manage to make them fit, but it was tight). Here are some smaller sized multi-turn trimmers that are verified to fit this board (by thorpy6 over at BYOC) this is the 1m one this is a 25k one (sub for 22k) this...

Missing Mouser numbers from abfacklen's list : C5, C6, C15, C20, C30 .....100p.....NP..... 140-50N5-101J-TB-RC C19, C21....1uf.....electrolytic..... 140-XRL25V1.0-RC R2, R3.....resistor.....10k..... 291-10K-RC R6, R21, R29, R30.....resistor.....100k..... 291-100K-RC R14.....resistor.....1M..... 291-...

There's a picture of a DM-2 and info on setting one up on page 8 that seems to show what the waveform needs to look like. I'm sure the same would apply to this build. Page 8 of this thread? I found the DM-2 info, but not the oscilloscope info. Good to know about those trimmers. EDIT - Guess I shoul...

Just got my board today (Canada). Very stoked to build this. I'm hoping to get this into a 1590BB box. Anyone have a successful drilling template? If not, I'll see what I can put together. And does anyone have the Mouser numbers for the missing parts as per abfacklen's list ? I've heard the trimmers...

For the shielded wire to the input (to reduce clock noise), would this work?
http://www.smallbearelec.com/Detail.bok?no=86

I'm hoping to order all my parts from Smallbear (must admit - intimidated by the giant known as Mouser!).

Just paid for my Aqua Puss board - but missed out on the MN3005 group order.
I'm just looking for one chip.

Thanks fellow rockers...rockers...