Or other medium quality soldering iron with temp control?

Title says it all. Message me with your price!

Well the schematic can be found here: http://revolutiondeux.blogspot.com/2012/07/wampler-ecstasy-euphoria-overdrive.html So use your audio probe and hit some open strings on your guitar with the probe plugged into the amp and test things in the signal path and find where the signal stops. Like maybe...

Yeah I would think the Collector voltage would be higher than that... check for a bad solder joint right off the 9v supply on the 51k resistor.

I'd be in for three boards!

Spent the last couple days working with both google sketchup and inkscape and they are a ton of fun to play with. Not sure which will become my standard. Sketchup seems to be really easy for working with enclosure, but I can see inkscape being much more useful for enclosure graphics.

Looked it over a couple times and found a bad joint at an electrolytic going into the IC, so that makes sense, but now after a while at full gain it starts to give out and lose clarity. I'm thinking I just need to replace the opamp and I'll be fine.

Thanks a ton guys! I'll have to try both inkscape and google sketchup, but to davent: how do I import the vectorpack into inkscape and what file format would I use?

Hey, I was wondering if there is some software for creating an internal layout of pedals. I've been googling this forever, but it just gives me advice on how to order my pedal chain lol. I've seen some designs that seem to do this and have pots, battery, jacks, footswitch all to real size to see how...

Here are the pics. Wiring is a tad unclear, but it should be wired fine, as I had it working perfectly. Let me know if you need any connections clarified, and as always thanks for all the time you've put into helping me. https://i1280.photobucket.com/albums/a496/mattlee0037/2013-10-01102133_zpsbdd08...

Bump

So I took some voltages and the only thing different is IC Pin 8 seems to be rising by anywhere from 0.2-0.6V (up to 5.34 probably would continue to rise slowly) and Pin 14 is decreasing by about as much as 8 increases. It continues to rise slowly as it is plugged in. Tested pot tapers and they're a...

Well the LED touching the chassis was because I was going to glue it in and forgo a bezel, but didn't have any glue with me and the touching doesn't make that much of a difference just thought it's be worth mentioning. I'll post pics later today and voltages tomorrow probably

Bump

Bumping this up real quick. Ok, so I took my Klone home today (college student) and I played it, and it sounded great, adds some mids and girth to my tele. Came back home after dinner, and I daisy chained an extra effect (had 3 originally and then added a MLJR) and I moved it around a bit and it wou...

Many myths I used to believe already dispelled! I need more...

Very informative, I'll be looking for your future posts on this topic in another thread!

Definitely interested in this as well!

Oh sweet, well my caps are all rated at least 25v so I'll try to make a voltage doubler soon and report back.

Interesting.... so could I theoretically take a 9v line from power to board like normal, but take another line off the DC jack to a voltage doubler feeding into the opamp? Also interested in running the whole circuit off of 18v.... if I tested it and fried the circuit would I just have to replace el...