I used the Layout from tagboardeffects but having a problem with this build.. when i plug in the power i can hear a crackle and the LEDs just light up for a second..the volume pot has no effect and the comp knob just makes the signal louder.. any advice? :hmmm: http://1.bp.blogspot.com/-UklsXdXnizQ/...

any news on this one?

is there a verified vero by now?

is the vero on page 4 verfied?

ShortScaleMike wrote:

ringleader wrote:any news on this one?

There is a schematic on the previous page. What news are you waiting on?

waiting for a pcb or vero layout..

any news on this one?

I see... :hmmm: It would be so cool if anyone could make a vero or pcb out of this: http://4.bp.blogspot.com/_y4AYtND8Hz8/R-D1JQQcF9I/AAAAAAAAAKI/upWnOEC87_g/s1600-h/vsex_probe.jpg pleeeease :) Not sure what he had in mind with C4...is it to prevent noise when adjusting the LED? Anyway, here you go...

Is there a vero layout based off that? I know theres a PCB but i've been through this thread a few times including just a second ago and never found a vero, i'd like one if there is one... although I could probably attempt to make one if there isn't. Unfortanetly no... There is the PCB(wah+controll...

I see...

It would be so cool if anyone could make a vero or pcb out of this:
http://4.bp.blogspot.com/_y4AYtND8Hz8/R ... _probe.jpg

pleeeease

The Sensitivity should be a 250K audio taper pot. You can possibly substitute lower or higher values; but if you use too low of a value, the sensitivity will be too low and it won't turn on, and if you use too high a value, it will be too sensitive and won't turn off. You can use it with double sid...

Okay, here is the PCB layout: https://www.freestompboxes.org/members/soulsonic/Gallery/WahProbe/Ghost%20Wah%20PCB.pdf https://www.freestompboxes.org/members/soulsonic/Gallery/WahProbe/Ghost%20Wah%20Layout.pdf It works good; no noises! Hi! which pot is connected to sensitivity1 and sensitivity2? 50k...

Hi!

Can someone please make a Vero Layout for the Probe Controller thats posted on briggs blog:
http://4.bp.blogspot.com/_y4AYtND8Hz8/R ... _probe.jpg

Would be awesome!
THX!

Any advice on picking the right BS170's?
Does one of them influence the overall sound or are all 3 of them important when it comes to a nice distortion.

ringleader wrote:I've build the SHO but theres a pop noise when i turn it on. The noise dissapears after switching 3 or 4 times but when i turn the knob the pop comes back. Is that normal?

and i'm not talkin about the crackle wich is obviously ok. Its a when turning on or off...

I've build the SHO but theres a pop noise when i turn it on. The noise dissapears after switching 3 or 4 times but when i turn the knob the pop comes back. Is that normal?