What cicuit is the 56n for? A 47n would probably work ok in most spots, you must have one of them. it was for a circuit i was trying to work out based things i liked from various schematics on home-wrecker. basically just trying to Frankenstein a pedal using current available schematics as a starti...

http://www.taydaelectronics.com/capacitors/polyester-film-box-type-capacitors/56nf-0-056uf-100v-5-polyester-film-box-type-capacitor.html Also checked Mouser. http://ca.mouser.com/Passive-Components/Capacitors/_/N-5g7rZscv7?P=1z0wprwZ1z0x83kZ1z0x692Z1z0z7l5 I would think all the usual suspects would...

since I have been having hell finding a .056 cap I started looking for a possible sub and ran across this link and it has some good info regarding what you could substitute for your needed cap in terms of uf/mf, voltages, etc. enjoy

http://www.niccomp.com/help/files/NIC_C ... e_0504.pdf

D-Day wrote:I like the blue ones! But lately I've given serious thought to jumping on the red capacitor bandwagon. They look like so much fun!

well with your avatar pic I would have guessed you liked the green ones

Haha! If you've read even 1% of the that debate surrounding capacitor choices, you'll have realised opinion is rife, and facts are few. Here are the important facts: 1. If it's a large value (e.g. generally above 1uF), you'll probably need to use polarised elctrolytics. The schematic or layout will...

kinda curious with the various types ( electrolytic, disk, etc) which type of caps does everyone prefer? also why do you prefer it? does using a different type have a benefit over another? anyway, reason I ask is I performed a little surgery on an OLD computer monitor to see what parts I could obtai...

I'm in the process of building a colorsound wah fuzz on vero board inside of an old crybaby. I'd like to use the inductor I salvaged from the crybaby. It's the black plastic cylinder type. My problem is I don't know which pins are the hot connection. After looking at the traces of the old board it ...