Im using some Bourns metal film resistor networks in my prototypes, they are nice and tidy on the board for summing duties in an audio mixer, they are rated for 200mw at the moment Im doing a simple mixer, 4 stereo channels so 2 resistor networks, 4 elements each with pin no 5 as the sum. I presume ...

this is a great thread and Ive been referencing it alot, things become clearer the more I learn about electronics I have some questions, I know this is an old thread but Im sure theres still plenty of interest and contributing active members still here if an op amp is used between both BBD's how muc...

but there are 2 separate tracks?

ye, seems they choose them for the mount style, they are Switchcraft clones. this is defintely the best layed out Behringer pedal Ive come across Im putting 2 in the 1 enclosure with midi controlled time and feedback and a fine control pot for the delay time. Im keeping most of the current pot layou...

I use Farnell, very quick delivery

gonna order from here soon, they have a nice selection http://www.musikding.de/

If I replace all the jacks* is there any reason to use TRS ? they dont appear to have any benefit since its not battery operated and theres a separate on/off and on/bypass switch

(Im doing a dual rehouse)

thanks for that, I was looking at the same schematic but dated 4/6/2011, r43 is in a different place! Ill use the older schematic with your instructions

lol, 'us' probably means singular

any help will be greatly appreciated, Im stuck on this. I found an LM4558N LFO schematic but ICA and ICB are mixed up and its a prototype, I found some great material on a Boss chorus which features a tl072 as an LFO but not sure how compatible that circuit is to the 4558 Im thinking R47 and R48 see...

Thread necro, but I did just this using standoffs to keep the existing switch and pots Fits well into a 125B. I added an extra switch to parallel a 330nF with the 47nF at c15 for extra slow mode. I changed the jacks for Switchcraft-type enclosed jacks, the only pain being the need to relocate a 1uF...

loctite 243

nobody? Ive used the search function and studied the schematic,

Im new to this but with a little experience, been learning in a non linear way so might have missed something simple

change r54 2.7k to VR10k?