https://youtu.be/ZhJrpIhAeyM MOSFET boost (similar to SHO) > inverted PNP germ gain stage > Fuzz War II tone control (mostly) > inverted PNP germ gain stage (collector bypassed 2.2u). Gain: B50K, Tone: A500K, Volume (trim pot): 100K Enjoy! Thank you so much for the teardown! Very interesting. While...

Nothing to see here… 330k in the place if the 330r :/

So I’ve made some changes and now getting some signal… it’s very gated and low volume. Replaced the link with the specified 220r resistor under Q4... That was recommended to avoid oscillation or something. I had a 20k resistor in place of a 220k resistor (not sure how this happened.. a first for me)...

Hello! I’ve just finished the Jext telex white pedal using the layout over at tagboard effects.. I’ve quadruple checked everything and it all looks good.. however there’s no signal. .. main change was replacing the 220r under Q4 with a jumper (this was recommended to prevent oscillation late in the ...

nothing to see here... despite looking over everything a thousand times I maned to miss an unsoldered jumper end! Thank you again for taking the time to troubleshoot!

Thanks deltafred.. so, connecting a 100nf cap to pins 0 and 5v on each IC?

Just finished building the quantum defrakulator and it almost works..... Its a 3 oscillator synth circuit with oscillator 1 turning into a 4 step sequencer when the LFO switch is pressed. All the oscillators work... the sequencer doesn't and neither does the switch for that matter. The switch doesn'...

Nothing to see here.. ashamed to admit I didn’t spot one of the transistor leg sockets wasn’t soldered properly!

Update: have now run 3 separate ground wires off the board to the power source ground ... from ground strip, from 33r and from 4.7u ground legs..... without luck. This solution has been suggested on a number of threads but isn’t working over here... hmm.. ideas??

Hello! I know I know... this is an old issue with posts dating back 12 years across a range of sites.. despite giving it a crack I can't seem to figure it out. :shock: I've just built this on Vero with some of the mods mentioned throughout a range of threads.. namely, changing the 47k resistor to 10...

https://moodysounds.com/en/universal-reverb-kit-pcb-components/ Thanks for those Kinski! I came across the moody option also.. hoping someone out there has the time and inclination to create a layout incorporating The G’s wet dry mods! :) As I have built many reverb circuits I would suggest researc...

Here is the ugliest vero you'll ever see :lol:. I was curious how hard it is to make a vero for a complete circuit. Well it is really hard, at least for me. I'm not seeing myself using veroboard for anything with more than 20 parts, ever. This mod makes use of the op amp buffers to isolate the circ...

kinski wrote: ↑03 Apr 2021, 21:48 https://moodysounds.com/en/universal-re ... omponents/

Thanks for those Kinski! I came across the moody option also.. hoping someone out there has the time and inclination to create a layout incorporating The G’s wet dry mods!

I know there are some other reverb kits on the market somewhere. Can’t think of the names now. Not of the 6G15, but probably still sounds nice. Im going to attempt the "ruthenium reverb' over at guitar-fx... reviews are quite positive. It uses the much smaller accutronics blue spring tank howe...

Oh, it was directed more to @tome.talevski, since he asked for a vero. Thanks for responding so quicky! Unfortunately, my skills limit me to reading and boarding much smaller schematics and my Vero request was with regards to the schem that Kinski posted. Not sure if anyone knows if there's a layou...

Hoping I could get some help here. I'd like to have indepent control of the Dry and Wet signal. Could I modify the single mix pot and use two mix pots instead? One for dry and one for wet? Pot A 1 to Dry signal, 2 to output, 3 to ground Pot B 1 to Wet signal, 2 to output, 3 to ground Would this wor...

Thanks! I’ll try and run with that.. I’m yet to troubleshoot w an audio probe!

Hello! Hope you're all having a good start to the new year. :) Just finished putting together the pladask elektrisk - workshop delay that's been verified over at guitar-fx-layouts. http://guitar-fx-layouts.42897.x6.nabble.com/Pladask-Elektrisk-Workshop-Delay-V3-td36522.html (Links to pics, schematic...

I may have just figured it out.. after resoldering I discovered one of the jumpers that shares a hole was a bit loose.. after resoldering properly all seems to work fine! Interestingly these jumpers connect to the 0 readings of IC2. Thanks for taking the time to respond and apologies for not having ...

Can you post the schematic you used. Here's a link to the Vero layout I used. :) https://imgur.com/rTRSAHA Yes but a vero layout is not a schematic. Someone with a bit of experience can read a schematic and see at a glance, a vero layout has to be reverse engineered. The only schematic I can find i...