There are several schematics that come up when you go looking for Yamaha NE-1 , and they have different ways of showing the dual pots orientation & it's a bit confusing for anyone new to these things. I wrote to Silentfly the first time I looked at this project years ago and his is a mistake in the schematic , and I think the wiring in the drawing of the pots in the Paul-in-the-lab schematic is at odds with the Freestompboxes one and possibly wrong. I know it's a simple thing to just try wiring...

My trusty 80s Rocktek BBD Delay died. I have soldering skills luckily, and a little experience troubleshooting electronics, but only the easy stuff like blown caps/diodes/burns/shorts. I have a great multimeter that does everything, oscilloscope, soldering iron, and adjustable power supply that will display watts being used.

I tried multiple 9V center negative power supplies that work with others, then I tried a battery, no luck. When I plug it all up and I kick it on/off (I can't tell when it...

Hi all, I've put together this volume/boost design meant to be used in a volume pedal enclosure.
It sounds good to my ears but I would love to hear any advice about improving the design in any way.
The things I want to keep the same:

The Volume treadle pot is A250k
There is a Max pot that sets the volume ceiling when Volume pot is fully clockwise
There is a decent amount of clean boost available

Thanks

Hey all,
first of all I may be posting in the wrong section, so mods, feel free to move the thread wherever it should be.

So I've read here and there about DemonFX and how they might be copying the cosmetics of famous pedals but not necessarily their schematics. That seems a bit silly and I don't see what they would gain from only doing half of the job.
Also I have read on Reddit someone said that Josh @JHS had (reportedly) had a look at the AT-DS and said it was not the same as their AT+ and...

Hello

This is a nice and rare rack mount tube preamp from the early 90's from Jackson. I have traced the power supply and created a schematic. Its just a simple linear supply.
I was thinking about reverse engineering the whole thing. Leave a comment if you want me to trace the entire thing. If I get enough interest Ill do it.

I posted a YouTube video about it on my channel:

JacksonJX3_PowerSupply.jpg

Peace out.
Pete

Anybody ever mod an Arion Stereo Flanger? I could use any help I can get as all I can do is switch out parts, no real technical knowledge at this point. But I do like to take the stuff apart and put it back together, especially when it sounds so much better after changing a couple of parts. Anyway if anybody can give me some info thanks very much.

- best crypto pumps on telegram
Make 1000% and more within 1 day, join channel @pump_upp !

Hello everybody.

Please excuse my english. It is not my motherlanguage. :-)

I already build a few pedals from pcbguitarmania and other sites. The only time i had to adjust something was when i build a phaser. In that case it was done by ear.

I`m not sure what to do with the three trimpots on the calvin vai.
How should that sound? Are there some voltages i should measure somewhere? Nothing about the pots in the building docs for that pedal.

Would someone be so kind and can advise on this?...

This is my first time posting here... I've been trying, for the better part of a year, to obtain this pedal. It beautifully replicates the sound of the Beatles - and much better than premium and expensive alternatives like Aclam's Dr. Robert or Jext Telez's White Pedal (no dis). Hear for yourself! Unfortunately the maker has gone completely AWOL... I was able to get a few replies from him last year but he disappeared. I think he's had enough with making pedals. His website and official social...

Rocktek Super Delay ADR-01

Gut shots of Rocktek's Super Delay.
All the parts are identified but I have no time to draw the schematics at the moment.

Some traces are burned (due to inadequate power supply I guess). Someone fixed that with some jumpers (two orange wires). You may also notice that the black wire for the battery snap is on the hole marked with (+) on the PCB, and the red is on (-). But that's OK, the wires are reversed at the battery snap too, so everything is wired properly....

Greetings all. I hv a FX90 Delay that is misbehaving. I only get dry signal. LED switching off and on.
I hv a scope, sig generator and audio trace at my disposal. I'm trying to understand how the pedal switches off and on. From the 4007ic it goes to a diode then to the mosfet which actualy switches the pedal off and on. I can hear a signal from the 4007 into the diode but nothing out. I replaced the diode but still nothing. I should hear my generated tone on front and back of diode right?

Hello. I'm looking for xicon's 42tm117-r. Please tell me where they are sold. If you have an extra one, I'd like you to give it to me. 　
If you know a compatible product for this transformer, please let me know. I want to create malekko wolftone chaos.

I’m planning a guitar build and trying to figure out the electronics wiring. I don’t fully understand switches, whether to us a DPDT or a 3PDT on/on/on.

Here is what I’m wanting to do:

HSH pickup configuration. 3-way blade pickup selector, wired Neck, Neck/Bridge, Bridge.

Then a separate mini-toggle: up - middle pickup only (shuts neck & bridge off). Middle - uses only the 3 way blade, for just neck/bridge options. Down - middle brought in with the neck/bridge.

I have an idea how this...

Hi,
I'm repairing at the moment a DOD 670 flanger that has what seems to be a shot SAD512D delay chip.

My pedal has a 110V power input, as I live in Europe and while I'm waiting to solve the current SAD512D situation I'm thinking in replacing the original small 110V primary power transformer for a 230V transformer so I don't need a mains voltage converter.

Just to let you know, theres versions of this pedal where the power transformer has 110V and 220V volts taps on the primary (the available...