IMG_20220518_204027.png IMG_20220518_204114.png

Here is my latest original build. The enclosure came from a 3-knob AliExpress zendrive clone kit by Landtone. I first used it for a DIY Friedman Golden Pearl, which is why there are two extra switches. It turned out that keeping these let me design a bit more flexibility in.

MOStache schem.PNG

It's a fairly straight forward amp-in-a-box type of deal, but here I'm using P-Mosfets (hence the name) instead of Jfets because they are much more...

I got this unit in and it sounds great on the bass

I was expecting more of an Overdrive unit but I got a distortion pedal. Sounds also great on guitar!!

Trex - Bass Juice.JPG

Hi all, my line6 m13 has blank lcd screens. The colours still change and the effects all still work. But unfortunately the lcds are either blank or sometimes all black. Looking online it seems like a few people has this issue but I haven’t found a way to repair it yet.
Does anyone have any advice? Thanks

This is side A of the Duellist dual pedal released as a standalone effect. It's got a couple of changes from what's inside the Duellist, but overall pretty close.

king_tone_soloist_trace_schematic.png

Basically a stripped-down Tube Screamer (Son of Screamer) with several tone options.

Full tracing journal: (includes Duellist and Heavyhand)

PCB:

This is side B of the Duellist dual pedal released as a standalone effect. It's got several tweaks & added features from what's inside the Duellist, so not a direct clone, though pretty close.

king_tone_heavyhand_trace_schematic.png

Basically a Bluesbreaker/Prince of Tone with a clipping diode switch and a few different pre-clipping tonal options.

Full tracing journal: (includes Duellist and Soloist)

PCB:

Hello all,

does anyone know this pedal Effettidiclara AGATA from Italy?
It is a boost/driver with 2 gain stages.
Does anyone have a schematic or an idea what kind of circuitry might be inside?

BR Stingray

Hello, I am posting this to get feedback on my schematic before building a vero of it. I modified an HM-2 schematic from Aion FX, of which is included in their build docs for their Graviton clone with features inspired by the Darkglass B7K. I inserted a clean blend and changed the 2 band Gyrator EQ to a four band. The frequencies are 80hZ, 500hZ, 1.5KhZ, and 5KhZ. I also changed the reverse polarity protection from a single 1n5817 diode to a BS250P P-Channel MOSFET and 1n4148 diode pair....

I've been looking at the Marshall shredmaster for a while, but as used gear prices have reached questionable highs I'm looking at alternatives. I have heard the Truetone Jekyll & Hyde is a TS-like on the overdrive side, and based on the shredmaster on the distortion side.

Do any of you know how different the Truetone and Marshall pedals are? Is it a direct clone? Just wondering if it's worth getting the Marshall.

Here's an odd one
made in Italy, with help from Gary Hurst.

FP1.jpg FP2.jpg FP3.jpg FP4.jpg FP5.jpg FP6.jpg

Hi
Newbie here

I have a Daphon E20CH Chorus pedal which came to me in a broken state, though was an easy fix, and now I'm wondering if I can give it some improvements to make it as quiet as possible and maximise its performance.

It's using the MN3207/MN3102 BBD pair, plus there's a MC4558 and 022D JRC (an 8-pin amp chip). There's 8-10 X C1815 transistors. Most of the caps are green polys - plus several cheap-brand electrolytics. The resistors all appear to be carbon film, the PCB is...

PDF: Electronics-Today-1987-05-OCR-Page-0050.pdf

Electronics-Today-1987-05-OCR-Page-0050.jpg

This one was a tricky bugger.
I am quite unsure about the accuracy of the trace, since I omitted all switching, but here's my shot at it.

Seems to be fairly similar to the Boss DS-1, missing one gain stage that gets added at the end. Horrid sounding crap through my Laney, even the abominable stock DS-1 sounds slightly better than this. But again, will tinker with it and see what mods are doable 8)

This 2nd gen of Arion pedals incorporate a second output with the ability to switch between...

(｡･∀･)ﾉﾞHi everyone, good morning, noon, and evening
I made a relay bypass version of bd2
IMG_20220327_1709A42.jpg

Schematic_BD-2 RealyPass_2022-04-29.png
Here is the schematic

wx_camera_1648264818689.jpg
This is the pcb for decoration

wx_camera_1649928022863(1).jpg
wx_camera_1649929766720.jpg
mounted on the circuit board

Boss BD2 RealyBypass.zip
As well as circuit board fabrication files, and schematic drawings in PDF format

Full article on gain control in PDF: Electronics Today AUS 01 1979 Gain Control Fuzz.pdf

Electronics Today AUS 01 1979 Gain Control Fuzz.jpg

Sorry to :beatdeadhorse: , but I love Zonk machines! No one likes the sound of the Zonk II (including myself, until now). To me it sounded dark and had a weird abrupt cutoff about the notes...especially lower power chords and the higher single note runs. I attributed this to just being a crap circuit, but after adjusting the bias I changed my mind. I replaced the q2 collector resistor (10k) with a pot (as close to 10k as you have.) I used an audio pot, but a linear would probably work better. I...

PDF: Le HAUT-PARLEUR n°1441 - 7 Février 1974 Fuzz tonalité.pdf

Le HAUT-PARLEUR n°1441 - 7 Février 1974 Fuzz tonalité 02.jpg Le HAUT-PARLEUR n°1441 - 7 Février 1974 Fuzz tonalité 03.jpg

Dear all,
somebody have the schematics of this stomp box?
I found one but it doesn't work and I'd like to repair it.

Radio-Electronics-1963-05-OCR-Page-0069.jpg

The French article that was the source for this circuit, seems to be:
AMPLIFICATEUR GUITARE 5 W (ECC83, ELL80 , EZ80), BF REALISATIONS (p. 46 dans Le Haut parleur n° 1061 mars 1963)
But it's sadly not available digitally, as far as I can tell.

PDF: HP1656_05-1980 Pedale fuzz sustain noise gate.pdf

HP1656_05-1980 Pedale fuzz sustain noise gate 01.jpg HP1656_05-1980 Pedale fuzz sustain noise gate 02.jpg HP1656_05-1980 Pedale fuzz sustain noise gate 03.jpg HP1656_05-1980 Pedale fuzz sustain noise gate 04.jpg

PDF: ETI-CA-1980-01 Struss Fuzz.pdf

ETI-CA-1980-01 Struss Fuzz 01.jpg ETI-CA-1980-01 Struss Fuzz 02.jpg ETI-CA-1980-01 Struss Fuzz 03.jpg

PDF: Electronics-Today-1990-06 Fecko Box Fuzz Echo.pdf

Electronics-Today-1990-06 Fecko Box Fuzz Echo 01.jpg Electronics-Today-1990-06 Fecko Box Fuzz Echo 02.jpg Electronics-Today-1990-06 Fecko Box Fuzz Echo 03.jpg Electronics-Today-1990-06 Fecko Box Fuzz Echo 04.jpg Electronics-Today-1990-06 Fecko Box Fuzz Echo 05.png

Low gain fuzzy overdrive “Schlager.Fuzz”

I like to present an overdrive / low gain fuzz—a lockdown project:

Starting from a fuzz face with lower beta germanium transistors, a fuzz circuit was tweaked to lower gain, softer clipping and the ability to handle (fat sounding) humbuckers:

schlager_fuzz_realized_en_grosz.gif

Low cut / mid boost including low cut control was inserted before input—to allow using guitars with “fat” pickups.

Low cut condenser value / low cut frequencies could be...

Here’s a PCB I made that uses the part numbers from the Big Muff Page. Find a schematic there and populate this board!

Here is an Elk Electrosound I did.

38FF0F4D-0D89-43CA-9658-8BBB38FD5866.jpeg 7CC55625-2FE1-4487-AF41-0EDDB66802E9.jpeg 00C23CAB-21FB-4B80-8C83-E21F43CFF264.jpeg

Hi All!

Many years ago I put out a free ' Pedal Builder's Vector Pack ' to help my fellow DIY'ers design, plan, test-fit and drill their pedals. I've been hard at work on Version 2 for six months now, it's grown to 20 pages with 200 illustrations :shock: For version 2, I've gone the Etsy route to help offset my labor costs. It's got lots of new knobs, hardware, enclosure sizes, drilling templates, etc. Hope some of you who have been using version 1 or are just hearing about this now will get...

Hi folks, I've got one of the above units (the 3 switch version) in for a repair. It works for all of 10 minutes then cuts out/goes glitchy and really fuzzy (way more than it should, sounds like the speaker has gone).

I've been in touch with Tech 21 and had a lengthy hack and forth but I'm not getting much luck. I've found a schematic on this site so that's a start but the jacks need de-soldered to get the board out to inspect it. Do any of you have any ideas on what I should check when I do...