I've had the idea of an envelope-controlled VCA effect pedal for a few months. Of course, many existing circuits fall into this broad definition, including compressors, the boss slow gear and tremolo effects, for the VCA part.
So what would set mine aside? One focus is on versatility. Once you have a way to control your output with a voltage, you can do whatever you like with it: swells, plucks, tremolo or even compressor if you try hard enough. I wanted to have at least a few of these modes at...

I'm experimenting with the EHX Small clone, but don't really understand why they put the transistor at the start of the circuit, why not just have a bit of filtering instead of the extra stuff.

Just curious.

I should add, I'm using two LM13700 OTA Ics instead of multiple CA3094s.

Hi!

My Zonk Machine started oscillating/squealing and producing static noise when attacking the strings. I didn't use the pedal for a while and wanted to put it on my board again.

The squealing is even heard when the pedal is off. The battery is new and works fine in other Tone Bender style pedals.

I made a short video of the issue:

Any ideas what could be causing this issue and how to fix it?

Thanks!

I quite liked the stock sound on this one. I am using it more than my TS9 lately...
Should not be too hard to convert into a better thing though. PCB looks neat, no brittle feel or artifacts.

Mod ideas are more than welcome :)

Cheers!

Hadn't gotten around to post this one yet.
Another cheapo, yet not awful-sounding one.
The circuit does not seem to stray too far from your standard OD. It has a fairly flat freq response but a limited drive range.
I'll get around to modding it at some point, but the bastard crapped on me shortly after reassembling it and I couldn't be bothered to reopen it.

Trace double-but-not-triple-checked. Pinch of salt, etc.

Have a nice one!

Hello.
I have analyzed the schematic of a TBCFX mep3 pedal I have on hand.
The FET was unknown.

I will share it with you since I have it.

I am using translation software for this text.
Please forgive me if the text is strange.

PDF: Hobby-Electronics-1979-06-S-OCR Tremolo Unit.pdf

Hobby-Electronics-1979-06-S-OCR Tremolo Unit.jpg

I’ve been dinking around on a fuzz face on a breadboard for a few days now. I’ve got it pretty dialed as to how I want it at this point. One problem though no matter what I’ve done doesn’t seem to change. When I use my strat (stock 2020 players) if I turn the volume knob below about 8 I have no sound unless I have the fuzz turned all the way up (I initially was following the directions from small bear that says use a 1k anti log so this makes the turn it all the way up even worse I think, I...

PDF Poptronics-1980-06 wah wah.pdf

Poptronics-1980-06 wah wah 1.jpg Poptronics-1980-06 wah wah 2.jpg Poptronics-1980-06 wah wah 3.jpg Poptronics-1980-06 wah wah 4.jpg

hsr_84_03-44.jpeg hsr_84_03-45.jpeg

PDF: Poptronics-1974-03 tremolo adapter.pdf

Poptronics-1974-03 tremolo adapter.jpg

PDF: Elektor-1979-12 Talk funny.pdf

Elektor-1979-12 Talk funny 01.jpg
Elektor-1979-12 Talk funny 02.jpg
Elektor-1979-12 Talk funny 03.jpg

Howdy!
I like the look of the Urei Mod One discrete opamp. It uses 5 BJT transistors.
My question is how do I adapt this circuit to germanium BJT transistors? Got a bunch of Soviet ones and would like to use them! I am trying to learn the math behind it, so I'd like to learn why/how it works or doesn't work.
Can I reverse engineer from silicon BJTs? (Essentially the opposite of this:
Thanks for your help in advance!

Anybody have the schematic for the Yamaha DSC-20M chorus pedal? Pedal works under battery, but plugging adapter in kills all life; D2 diode also does not look original.

PDF: Hobby-Electronics-1981-12-S-OCR Graphic EQ.pdf

---
Hobby-Electronics-1981-12-S-OCR Graphic EQ 1.jpg Hobby-Electronics-1981-12-S-OCR Graphic EQ 2.jpg Hobby-Electronics-1981-12-S-OCR Graphic EQ 3.jpg Hobby-Electronics-1981-12-S-OCR Graphic EQ 4.jpg

PDF: Practical-Electronics-1975-08 Fuzz effect.pdf

----

Practical-Electronics-1975-08 Fuzz effect.jpg

Hobby-Electronics-1981-07-S-OCR Treble Booster.pdf

Hobby-Electronics-1981-07-S-OCR Treble Booster 2.jpg Hobby-Electronics-1981-07-S-OCR Treble Booster 3.jpg

PDF: Pop-1972-07 Optimum Fuzz.pdf

----

Pop-1972-07 Optimum Fuzz 1.jpg Pop-1972-07 Optimum Fuzz 2.jpg

I apparently have a thing for delay/reverb circuits. I decided to do a true stereo reverb using PT2399. It's based on my Spare Room design, but it takes advantage of of the ability to cross feed the left and right signals and to do some cool cross channel-dependent modulation. It's not a small circuit by any measure. In fact, it may be the most complicated single knob pedal in the DIY world, but it's a fun one. The schematic is too big to post at reasonable quality here, but I put the short...

PDF: ETI-1980-04-80 UK Preamp and Power amps.pdf
--------
ETI-1980-04-80 UK Preamp and Power amps 1.jpg ETI-1980-04-80 UK Preamp and Power amps 2.jpg ETI-1980-04-80 UK Preamp and Power amps 3.jpg ETI-1980-04-80 UK Preamp and Power amps 4.jpg

hey guys
i just built one, i tried a lot of transistors and finally got some nice sound out of it. bias voltages are ok, no ugly noises on the decay
its gated in a nice way, with a hint of octave up when i back the guitar vol pot a little....
what bothers me is on a certain combination on the guitar volume pot and the fuzz''/ bias pot in produces a kind of octave down sound which is actually very pleasant
my question is whether this is normal. i havent heard of a zonk pedal doing this

i...

So I have a DL-4 that powers on maybe 1 out of 10 times. When it does power on, it works totally fine and indefinitely. Sometimes if I unplug it after working then plug it back in, it works. Most of the time it doesn't. After that, it seems like 2 consecutive times powering up is the limit. I've reseated the Eprom several times and thoroughly cleaned the pins. I reflowed all of the pins of the socket. I reflowed a few ICs around the Eprom to see if something was just making a bad contact. I've...

I have built an old favorite from this board, the Highway 89 from Doug Hammond. This pedal kills. The tone is rocking and ballsy and the clean up is great!!

I was trying to let the other guitar player in my band use it and I discovered a really strange issue that we have tracked down to a power issue generally but do not know specifically what the problem is.

When it is powered from my old dinosaur SKB pedalboard the pedal works fine, as it does when I use a single Boss PSA 120 style...

I have extra boards from some pcbway orders that I've decided to offer up stateside.
●●●this is for USA shipping only●●●

They are all verified.

There's multiples of each pictured.

$5 shipping included will get you whatever boards you want, up to one of each design.

To be clear for $5 you can get all 5 boards shipping included.

●●●this is for USA shipping only●●●

I'm open to trades for boards that you have extras of.

Pm me if interested.

20220520_144152.jpg
MXR Blue Box

Mesa...

I got this unit in and it sounds great on the bass

I was expecting more of an Overdrive unit but I got a distortion pedal. Sounds also great on guitar!!

Trex - Bass Juice.JPG