I wouldn't care but I read it as well, because I've got a load of NSL32s so I was excited when I saw them mentioned until I read on! Didn't read the BOM though :oops: They may work with series/parallel resistors I just couldn't be arsed doing the legwork. Getting ready to etch this and do a parts c...

LaceSensor wrote:Mistake in build doc spotted on boxing up/wiring, related to the tip and sleeve connections for Pedal control 1.

See latest version, attached.

Amazing.

This is on my list of "build to keeps"

Dan

I know you said Europe - but here's a nice selection:

http://www.powerwerx.com/wire-cable/ptf ... -wire.html

or....

Mouser:

31VQ601-F

31VQ405-F

Dan

I've just finished up my Dirtbag and I have no issues with clock whine or excessive distortion. The only problem I have is significant footswitch popping that I can't get rid of. Anybody else have this problem and any suggestions for getting rid of it? The pcb already has a 2.2M pull down resistor....

disorder wrote:cant find the original bc167b transistors, anyone know of a close substitute? or what creepy fingers is using here?

Google says:

substitue for BC167:

BC174 BC182 BC190 BC 546 BC107 BC147 BC 151 BC 171A BC 317 MPS 3704 2N3242 2SC1815
2SC828 = BC167

What I've been looking for (for quite a while) is something like this circuit - that I can hook up to the speaker leads (or just one lead - the other to ground ?) of a cobbled together amp I have. So the meter would bounce up and down based on speaker output.

Think this project would work ?


Dan

Someone needs to do the same thing with Briggs's schematics

Just curious if any1 could explain where i connect the daughter board to? i couldnt make it out from the schematic. is there another 8pin chip underneath the daughter board? The daughter board is going to plug into the orginal spot where the single BBD used to be. Use this as a reference: http://pw...

You guys are the closest I've found to having a schematic for this pedal; has anyone here made it? I've been searching for months to find it and I'd really appreciate anything you guys could tell me about it. Thank you! I just re-uploaded the pics in my post. Take a look at 'em. I don't think you'r...

geiristudio wrote:I haven't been able to start making one of these until now and I'm using Mark's vero layout. How is the orientation of the LEDs ?

Doesn't really matter - as long as they're opposite each other.


Dan

Found this on my hard drive:

I'll take 'em all !

Can I Paypal gift you - so you can avoid the fees - then you can just ship it all when you get a chance ?

CNO is an abbreviation on this board for "crackle not okay" which is a booster circuit/pedal.

Even the 'bots are happy to be back !!

x1,000 !!

you know me - I'm already in.


For a few of each.



I loves me some delay....................






Dan

Can I (we) order boards now ?

any tips or links on how to get that cool translucent finish? I love it mine doesn't look nearly as good with a conventional paint job, love the bjfe finish want to know the secrets!! +1 I would like to know too. it's way cooler than the standard one solid color boxes. http://pws.cablespeed.com/~da...

To all, Looks like i forgot to include the Bill of Materials on the PDF project. I will let you know when the PDF is updated. you have expensive taste in BBDs ;) These look fake, and the schem clearly states that it uses MN3008... Thanks A LOT for sharing bro! ps: the overall style is quite Dirk_He...