It's very pretty

9.6V IS a standard power supply. All the big switched mode types (powerall, diago and onespot) give a fairly solid 9.6V at any draw. What power supply did you have a problem with?

How are you planning on connecting the primaries to the mains?

You could put two 1Hs in parallel to make 0.5H couldn't you?

I believe the inductance will just translate the frequency range. Some of the old Snarling Dogs wahs had an external footswitch for swapping inductors to give different freq ranges.

Tayda were a godsend when they arrived; the prices of futurlec and half the shipping times

Rivets.

http://www.overclock.net/t/337343/how-t ... -replacing

At this point it's just curiosity. See what you can read off the larger ICs.

It *could* be an FV-1. If they programmed all those effects custom and then used a microcontroller to swap programs, it would be totally doable. I think. I agree it could, but the FV1 is not a cheap part, and behringer must have the algorithms and infrastructure to work more cheaply in another plat...

I doubt it's an FV-1; probably something a bit more hardcore.

You should be able to work out those last few connections based on the pinout of the op-amp. It needs to get power, and the signal goes towards inputs and away from outputs.

mictester wrote: I don't think I've ever seen a 3-wire LDR.

me neither, although there is a vactrol you can get with a centre-tapped LDR.

CJ, the cap is only seperated from the circuit by the resistance of the pot, which for a gibson could be as little as 250k.

diagrammatiks wrote:yo 16*44 is not real good.

Take it up with the entire world, not with me...

Ho and every guitarist discussing speakers did ? Can you choose a speaker just by comparing curves ? I can't, as very different sounding speakers can have exactly the same curves :) And then, how do you measure the difference between an Alnico speaker and a Ceramic one ? Frequency response, harmoni...

I did not record the tests from my boosters, as i di not think it would be useful at the time, as i have a hard time keeping a single one for me :cry: , and anyway, as the frequency corner is tunable, i would probably get some "the pot was not in the exact same position" type of response ...

I can't hear a difference on 720p with headphones on,



Tell me those don't all sound exactly the same! (It's a timelink)

Zokk wrote:the sound itself should be cleaner with modern metal film

Quieter, yeah, better tolerance, yeah, cleaner? Not really sure what a 'cleaner' resistor sounds like...

2 DSPs and a GPP? Love how far we've come!

I believe what we are witnessing here, ladies and gents, is the WORST STANDOFF METHOD OF ALL TIME

I don't think you could have done something less effective with a brillo pad

The toggle moves connectors at the other end of it to join the contacts.

Imagine the lever being extended into the body of the switch and the way around it is becomes very intuitive. Imagine how hard it would be (physically) to do it the other way.