Off you go:
Ibanez TL5 tremolo

koda-kd-24.gif Another polish Koda stompbox schematic. Blue box, very similar If somebody can check what was the inspiration for this one i will be grateful.

Hi everyone, not exactly an effect to stomp on, but does anyone have a service-manual for an Ibanez/Maxon GE1502 and 3101 Rack-EQ? I already tried to contact three web dealers for analog schematics which offer it on their homepage, without any reply.
I´d even pay for it. It would be great if information was contained on how to set the internet trimmers per band, but a schematic would suffice for now...

Boss CEB-3 schematic

Hello,

I need to repair an MXR M206 Time Delay, black box with green printing, of the MXR series 2000.
These one :

It has the Reticon SAD4096 chip (working). The delay is ok but the mix circuitry has a problem : there is no direct sound.
The MIX pot has been changed, and the delay only works for full wet sound (full cw).

So I'm looking for the schematic, but it seems very rare. Does anybody have this schematic or knows the mix pot value ?
It would help me a lot, thank you !

Hey all,

Lent my Maxon AD-80 out, fellow gave it back saying it didn't work. It's got power, LED goes on, clean signal goes through the mix, but no wet. If I max out the blend to wet I get nothing. I've tried poking around a bit with an audio probe and I can't find a wet signal anywhere on the board. I scraped away some old flux residue I can't see any obviously blown caps or fried components. I guess my question is are there common known issues that I can check first with this pedal? An easy...

I have a Boss HR-2 that I just pulled out of storage and found dead. Upon opening the unit I found that C1 was popped (bits of cardboard all over etc). Unfortunately the casing was also destroyed. I tried contacting Boss but they said they couldn't help me with the info. Does anyone know the value of this electrolytic cap?

I love this effect but the use of just does not make any sence at all:

The bigger the better?

I recently started getting into pedals again after not using them for years. Saw Ammoon pedals on eBay for $20 each with shipping from china via epacket. After getting quite a few of these pedals, I began designing the ultimate nano/mini pedalboard to hold them all.

The Ammoon pedals look identical to the Rowin nano series. At first I opened up the rumble pedal because it was not one of my favorites. I just opened up the metal pedal that I bought for a friend that arrived with a low volume...

Mooer The Wahter pictures.

See #43 - Looks interesting!

Just delete the .zip from the end of the link and it should open OK.

I had got a German 19 case preamp in the last Millenium and It sounds amazing good as far as I can remember.
There was a double foot switch (1/4 stereo jack) for switching the bypass and to toogle between two gain values.
The Amp was createted as add-on for single channel amps to extend this to a two channel one.
I guess it was manufactured in the early eighties, but I sold it a long time ago.
I traced the Amp and redrawed later.
No I found the schematic in my schematic library.
Here is the...

Hi,
this is the corned beef schematic. It's another PT2399 delay with fixed time and feedback. I've inserted feedback and time controls and changed C19 , the filter cap cutoff from unknow value to 10nf for a better low pass. R16 is 33k in the original but I've changed to 47k for a better noise performance. It's a great deley pedal with low repetition distorted noise (and only at max delay settings). The transistor is a generic 2N3904 or 2N5088. It's a buffer inserted at the pt2399 output.

Just for info Mooer Tender Octaver.

Just as info Mooer Micro Looper.

Weehbo-BigBrother

I just sold my awesome TC Electronic Flashback delay pedal to buy the bigger Flashback X4 delay pedal, mainly because I wanted dedicated footswitches for the looper function which I use frequently in live situations.

I want to be able to use the looper functions, while having the ability to turn on/off the delay, without bending over and manually turning the Delay Level knob to minimum for DELAY OFF.

The manual says that any of the 3 delay parameters can be assigned to an expression pedal...

Anyone ever heard of these pedals? I got one in from a friend and it isn't working.

The DC jack was placed afterwards and short circuited one of the lugs of the pometer (not the grounded one) as it wasn't secured well enough. The print is epoxied in all the way.... All I can spot are two ceramic caps.

The website of him is weird........ I spot the fet boosters besides the anti snore units here.... .......

Some pics:
2014-06-11 22.34.46.jpg 2014-06-11 22.36.06.jpg 2014-06-11 22.37.00.jpg