DIY Projects

Original effects with schematics, layouts and instructions, freely contributed by members or found in publications. Cannot be used for commercial purposes without the consent of the owners of the copyright.

Forum

Topics

Posts

Last post

Printed/Published Online Designs
Stompboxes circuits published in magazines, books or on DIY electronics websites.
Topics: 809

809 Topics

8486 Posts

Last post Re: Engl e530 Fet
lutor
17 nov 2024, 14:38
Original Tracer Layouts
A collection of original layouts for vintage guitar effects. If you want to build real replica's of vintage pedals, this is the forum you want to look at.
Topics: 20

20 Topics

111 Posts

Last post Re: MXR Dyna Comp - original …
mozz
09 nov 2023, 19:55

New Topic

784 topics

Page 1 of 32
- Jump to page:
1
2
3
4
5
…
32
Next

Announcements

Replies

Views

Last post

Projects Index by type of effect

Last post by modman « 21 Jan 2008, 05:37

by modman » 21 Jan 2008, 05:37

Rating: 0.2%

About the projects index

This page tries to keep the available projects indexed.
If you want to share files to build a effect that's not yet (widely) available, it would be a pleasure for us to host it here.
The projects should be verified , though, and at least contain a schematic , some layout file (transfer, vero, perf) and a component layout file .
Incomplete or unverified projects will be moved to the Projects in Progress folder: if you fall upon such a project, please report the...

0 Replies

15877 Views

View the latest post Projects Index by type of ef …
Last post modman
21 Jan 2008, 05:37

Topics

Replies

Views

Last post

THE ENGINEER'S THUMB... At last, a better compressor! [documentation]

Last post by jhergonz « 20 May 2018, 18:09
Replies: 101
by merlinb » 21 Apr 2012, 14:23
1

2

3

4

5

6
Rating: 14.3%

For a long time I've felt guilty that my pedal board didn't include a compressor. Finally, after about a year of breadboarding, I have produced a circuit that can take on a Dynacomp and win , boasting:

Up to five times more headroom than a Dynacomp
Less noise than a Dynacomp
Same available sustain as a Dynacomp
Fewer parts than a Dynacomp
Cheaper than a Dynacomp
Feedforward side chain
Possibility for all five controls
Fits in 1590B
Millennium bypass

Despite its final simplicity, I went though...
101 Replies

219878 Views

View the latest post Re: THE ENGINEER'S THUMB... …
Last post jhergonz
20 May 2018, 18:09
Pelota 2: PT2399 delay [documentation]

Last post by chip- « 30 Nov 2024, 17:49
Replies: 12
by dylan159 » 21 Jan 2023, 11:51

Rating: 6.3%

It’s been a couple of years since I’ve made the first Pelota delay: from the very name, it was a circuit inspired by a few popular PT2399 delays, such as the Rebote series, the Deep Blue Delay, and many others that aren’t that different to be worth mentioning.

Even then, with my more limited experience and knowledge, I knew I could try to do better, starting from the awful, noisy, high resistance inverting input stage you find in the vast majority of them that makes you wonder who did it first...

12 Replies

5349 Views

View the latest post Re: Pelota 2: PT2399 delay
Last post chip-
30 Nov 2024, 17:49
Fred Briggs - Super OCD

Last post by blackboarcult « 30 Nov 2024, 11:09
Replies: 67
by briggs » 28 Feb 2012, 16:39
1

2

3

4
Rating: 8.4%

From my blog:

The Fulltone OCD has been an overdrive favourite for many years now. It's got a really nice tone when your amp is set right (I prefer it with Marshalls I must say). Well, I've always thought about modifiying the basic circuit (which itself is based around the old Voodoo Labs Overdrive) to give it a little more variety and use over a wider spectrum of tones.

As you can see the Super OCD has a few extra controls:

- Firstly the Bass control - it's nicked from Paul C's Timmy pedal...
67 Replies

26984 Views

View the latest post Re: Fred Briggs - Super OCD
Last post blackboarcult
30 Nov 2024, 11:09
One Chip Pony — Comparator Fuzz

Last post by addamsthursday « 28 Nov 2024, 08:44
Replies: 1
by Aleph Null » 06 May 2024, 15:15

Rating: 0.6%

This is my first attempt at PCB design. I chose a simple circuit and followed along to DigiKey's KiCad tutorials. . The One Chip Pony only does one trick—and it only uses one chip!

Clown color hydro-dip finish felt appropriate.

Maybe it looks a little silly in such a large enclosure, but I needed the extra room for the giant knob! This layout was designed specifically to accommodate the knob and switch, and also to be easy to troubleshoot.

An input gain stage feeds a comparator....

1 Replies

1403 Views

View the latest post Re: One Chip Pony — Comparat …
Last post addamsthursday
28 Nov 2024, 08:44
Baja B K Butler Tube Driver [documentation]

Last post by Manfred « 22 Nov 2024, 21:10
Replies: 327
by bajaman » 12 Dec 2007, 07:22
1

…

13

14

15

16

17
Rating: 10.4%

This is NOT a beginner's project.
This was traced from a recent B K Butler pedal and has the bias pot modification which alters the voltage on the cathodes of the 12AX7 tube.
You will need a suitable 12vAC power pack for this pedal - the original has a small toroidal mains transformer fitted internally near the front of the case.
The input and output sockets are isolated from the chassis by plastic insulating spacers. The earth pin on the input socket is connected by a parallel connected 100...
327 Replies

154081 Views

View the latest post Re: Baja B K Butler Tube Dri …
Last post Manfred
22 Nov 2024, 21:10
I can't find information about this blues driver anywhere

Last post by thomasbe86 « 22 Nov 2024, 13:44
Replies: 8
by Serya » 18 Jan 2024, 08:03

No information at all, please help me.

8 Replies

2209 Views

View the latest post Re: I can't find information …
Last post thomasbe86
22 Nov 2024, 13:44
BAJA AC30TB overdrive pedal project 110218 [documentation]

Last post by イシカワ « 11 Nov 2024, 02:41
Replies: 73
by bajaman » 11 Feb 2018, 01:43
1

2

3

4
Rating: 30.7%

You asked for it and here it is :wink:
The Vox AC30 Top Boost amplifier including driver and output stage in a convenient 9v dc overdrive pedal format :lol:
There are three places in the AC30 where clipping occurs at different signal levels - with input gain and tone controls on maximum reasonably symmetrical occurs first on the output stage at approximately 1.3mV 1kHz sine wave signal input level. At 2.8mV signal input the driver stage goes into asymmetrical clip at first and eventually...
73 Replies

29951 Views

View the latest post Re: BAJA AC30TB overdrive pe …
Last post イシカワ
11 Nov 2024, 02:41
PUP: a host of Perfectly Usable Phasers [documentation]

Last post by Glad-Row4809 « 09 Nov 2024, 08:50
Replies: 69
by dylan159 » 22 Oct 2022, 09:52
1

2

3

4
Rating: 8.2%

I’ve always liked phasers, in fact one of my first pedals I’ve ever built was a Phase 45 clone. Not only I liked how it sounded, another main reason for choosing it (other than the complexity) was that I only needed two matched JFETs instead of, for example, four for a four-stage phaser.
I’ve been sitting there, content with my box, for some years, until recently I’ve heard of the Project 447 phaser on an old ETI magazine. It wasn’t perfect by most accounts (the long string of 741 op-amps in...
69 Replies

14668 Views

View the latest post Re: PUP: a host of Perfectly …
Last post Glad-Row4809
09 Nov 2024, 08:50
Amp for sustainer

Last post by Jarno « 05 Nov 2024, 09:16
Replies: 1
by vprjs » 02 Nov 2024, 02:49

Hi. I still want to make a sustainer for my guitar.
I bought a single coil to use as a sustainer and some wire to wrap the coil to the required resistance.

Is the best value for a sustainer coil 8 ohms?

And I have questions, what amp should I try to use?

In the most famous page on the subject, the author uses a Fetzer/Ruby amp

Then I found modified version of Fetzer/Ruby amp
photo_2024-11-02_03-29-54.jpg

Also there is another site about sustainer, and author uses more complicated...

1 Replies

378 Views

View the latest post Re: Amp for sustainer
Last post Jarno
05 Nov 2024, 09:16
Keeley Katana Clean Boost (layout)

Last post by heyveno « 04 Nov 2024, 13:37
Replies: 6
by numaxim » 03 Sep 2018, 07:07

Rating: 1.7%

Goodmorning everyone!
I made a layout for the keeley katana. if any of you were to serve, I share the layout ..

have fun!

schematic&pcb_download

6 Replies

4308 Views

View the latest post Re: Keeley Katana Clean Boos …
Last post heyveno
04 Nov 2024, 13:37
Noisegate "Rauschgift"

Last post by toxonic « 29 Oct 2024, 12:50
Replies: 17
by toxonic » 21 Oct 2024, 17:39

Rating: 2.4%

Hi folks,
it's already nearly two years ago, when I bought my first pedal kit and made my first steps in building my own effects.
Since I have not so much time to practice i'm still a noob but i'd like to upload a circuit I've been working on.
I wanted to build my own noisegate and on my way I stumbled across some circuits to get started, but none of them really satisfied me completely.
Most of them suffer on an unnatural decay behaviour at higher release times.
I now built one by my own but...

17 Replies

1791 Views

View the latest post Re: Noisegate "Rauschgi …
Last post toxonic
29 Oct 2024, 12:50
Germanium and Silicon diodes comparison [documentation]

Last post by luix « 25 Oct 2024, 04:52
Replies: 43
by thomasbe861 » 13 Oct 2023, 10:01
1

2

3
Rating: 11%

Long story short, I ended up testing and measuring a good part of all odd diodes I have had accumulated over the decades of tinkering.
Some are modern, widely available, some are more rare and not produced anymore, germanium, silicon, including Schottky, silicon carbide, Zener, LEDs, IR, etc.
Here are the graphs, showing the forward voltage drop for a given current (I-V curve) for different types of diodes. Hope this is helpful to anyone. All were measured using a Peak Atlas DCA75 Pro.

The...
43 Replies

29820 Views

View the latest post Re: Germanium and Silicon di …
Last post luix
25 Oct 2024, 04:52
BAJA boss PH-1 phaser build [documentation]

Last post by Gypsy Roadie « 23 Oct 2024, 04:22
Replies: 6
by bajaman » 20 Sep 2019, 01:31

Rating: 2.8%

Hi folks
A good friend asked me to build a replica of the BOSS PH-1 phaser recently - he had one of these back in the 70s and always regretted selling it. It is only a four stage phaser similar to the MXR Phase 45 and consequently is a very subtle effect and similar to a mild tremolo, but this is exactly what he was looking for. I set to work by resizing the Boss pcb layout to enable it to fit inside a 1590B enclosure. Here are some pictures of the finished product including schematic and board...

6 Replies

4584 Views

View the latest post Re: BAJA boss PH-1 phaser bu …
Last post Gypsy Roadie
23 Oct 2024, 04:22
Analog cab sim

Last post by J4mes « 22 Oct 2024, 00:51
Replies: 1
by caspercody » 14 Oct 2024, 16:41

Hello

I want to build an analog cab sim, anyone know a really good accurate schematic?

Also, anyway to create an analog cab sim based on a IR one might use the most?

Thanks
Rob

1 Replies

1057 Views

View the latest post Re: Analog cab sim
Last post J4mes
22 Oct 2024, 00:51
"That" compressor - good, easy, adjustable DIY compressor [documentation]

Last post by aquataur « 21 Oct 2024, 18:41
Replies: 10
by dylan159 » 01 Jul 2023, 22:36

Rating: 3.9%

I had wanted to make a compressor circuit for a long time, because it's a popular and somewhat easy to make effect, but the existing DIY offer left something to be desired. You should be ready to accept some compromise, in the form of: noisy and hard to find OTA chips; expensive and hard to find (in THT at least) VCA chips; hard to find (again in THT) and fiddly JFETs; circuits that underperform in some way or another, or; circuits that aren't well translated to instrument input and stompbox...

10 Replies

5837 Views

View the latest post Re: "That" compres …
Last post aquataur
21 Oct 2024, 18:41
JTEX Shockman - my modern take on the classic Rockman [documentation]

Last post by J4mes « 21 Oct 2024, 12:21
Replies: 21
by JTEX » 06 Aug 2021, 19:32
1

2
Rating: 5%

I'm posting this here for the benefit of the community. It's my own idea of what a Rockman headphone amp should be like, made with modern, easily available components. It is intentionally not an exact clone of any specific Rockman model, because my aim right from the beginning was to make it better. I'd say it's closest to an X100 without the Echo part, but with a nice feature from the Soloist (the Doubler mode), and another really nice feature from the Ace series: single 9V battery power. I...
21 Replies

12849 Views

View the latest post Re: JTEX Shockman - my moder …
Last post J4mes
21 Oct 2024, 12:21
Soul Sonic - Folk Driver, The Honey Bee Challenge!

Last post by ding127063 « 17 Oct 2024, 11:52
Replies: 72
by soulsonic » 19 Apr 2009, 07:52
1

2

3

4
Rating: 3.9%

Hi everyone, as I'm sure many of you know, Björn Juhl sent me a Honey Bee pedal to play with. The idea was to listen to the sound and see if it can inspire a nice DIY project. Well, after spending some time with it, I've come up with something that sounds good and will certainly remind people familiar with the sound of the Honey Bee.
My goal was to keep the design as simple as possible, but still try to fit in some tricks. This uses both positive and negative feedback to get its sound. R8 is...
72 Replies

20331 Views

View the latest post Re: Soul Sonic - Folk Driver …
Last post ding127063
17 Oct 2024, 11:52
Demo amp

Last post by mauman « 07 Oct 2024, 18:41
Replies: 4
by vprjs » 07 Oct 2024, 00:27

Rating: 0.9%

Hi there. I want to build a sort of demo amp . I want to use it to try circuits on a breadboard. I found 4 inch regular speaker. And want to put a ruby amp inside. Do I need to add a low pass filter to this circuit to cut non-guitar high frequencies?

4 Replies

788 Views

View the latest post Re: Demo amp
Last post mauman
07 Oct 2024, 18:41
BAJA REACTOR 010119 [documentation]

Last post by tuck « 07 Oct 2024, 07:39
Replies: 78
by bajaman » 01 Jan 2019, 06:47
1

2

3

4
Rating: 22.5%

Happy New Year to all the good folks here at freestompboxes.org.
Here is a new design that I have been working on over the last few years - a pedal designed to mimic the performance of a typical negative feedback tube amp power stage driving a Celestion quad box or similar.

The pedal has the negative feedback presence and depth (resonance) controls typical of Soldano, Marshall, Fender, Peavey etc.

Tube power amplifiers have a high output impedance compared to solid state class AB and digital...
78 Replies

83237 Views

View the latest post Re: BAJA REACTOR 010119
Last post tuck
07 Oct 2024, 07:39
Another modification of fuzzface

Last post by Vitallka « 06 Oct 2024, 18:11
Replies: 2
by Vitallka » 28 May 2023, 17:30

Rating: 3.2%

Hi to all.
Fuzzface has undergone so many modifications, so only mine is missing :D
I set out to redo the fuzzface in a way that would be easy to repeat and not sound as sharp as the silicon transistors. Therefore, I decided to add zener diodes between the base and the collector and it softened the sound. Also, the capacitor at the input is also of reduced capacity so that there is no excess of low frequencies.
Here is the modification scheme:

And here is the video:

Criticism and...

2 Replies

2306 Views

View the latest post Re: Another modification of …
Last post Vitallka
06 Oct 2024, 18:11
Simple Buffered Splitter

Last post by J4mes « 02 Oct 2024, 18:00
Replies: 14
by culturejam » 30 Aug 2011, 15:29

Rating: 2.6%

This is a very simple buffered splitter project. You can use it to create two equal outputs for your guitar or another pedal. This is handy for running a stereo amplifier setup, splitting a single signal into two effects pedals, or any of several other applications in which you need to have two equal, buffered outputs. The circuit consists of a simple transistor input buffer that feeds a pair of parallel op amp-based output buffers.

From an EE perspective, this isn't a perfect circuit. From a...

14 Replies

6480 Views

View the latest post Re: Simple Buffered Splitter
Last post J4mes
02 Oct 2024, 18:00
Analog Delay Add-Ons - Double Time, Modulation, Exp

Last post by abfackeln « 30 Sep 2024, 11:55
Replies: 269
by abfackeln » 16 Jan 2010, 21:59
1

…

10

11

12

13

14
Rating: 2.2%

Several of you have been asking about these, so here's the first pass at some add-on projects for analog delays. These have been tested on madbean's Aquaboy prototype and the Aqua Puss project boards, and should work for any similar circuit (DM-2, AD-80, etc). These were tested with the MN3005, but should also work on madbean's Aquaboy if you're using the V3205, since polarity switching is handled on the main board (but I have not tested with the 3205).
I'll also say that these are not so much...
269 Replies

73263 Views

View the latest post Re: Analog Delay Add-Ons - D …
Last post abfackeln
30 Sep 2024, 11:55
Clown Centurion (reworked Klon) [documentation]

Last post by JackLee1983 « 29 Sep 2024, 02:33
Replies: 35
by dylan159 » 18 Mar 2021, 12:55
1

2
Rating: 10.8%

This is my last one, I have some of these in store, which I will sure to share if you like.

I like to take circuits I find interesting and rework them according to my taste following some guidelines, which can be summed up as:

-reducing the number of components as much as possible. I think there's beauty and elegance in simple things, and if I can get away with it or have a good reason to, I like to use less components
-standard values. I like to stick to E6 values for the same reasons, and...
35 Replies

14715 Views

View the latest post Re: Clown Centurion (reworke …
Last post JackLee1983
29 Sep 2024, 02:33
New at Topopiccione: EH Double Muff Plus (modded)

Last post by Intripped « 25 Sep 2024, 11:53
Replies: 12
by mouse » 19 Oct 2011, 11:07

Rating: 0.4%

Hi to everyone,
today I posted a new project on my website, after four years of silence...
I took a standard Double Muff and added a lot of features, such as individual gain setting for each amplifier stage, a tone control, output buffer for volume recovery and a trimmer to avoid volume difference when switch between modes.

In case of copyright issues, I'll remove it from my site, but the design I posted is no longer a standard Double Muff...
Bye and have fun
Alessandro

12 Replies

2403 Views

View the latest post Re: New at Topopiccione: EH …
Last post Intripped
25 Sep 2024, 11:53
Peavey EDB1 active DI (verified)

Last post by diskovolos « 22 Sep 2024, 12:02

by diskovolos » 22 Sep 2024, 12:02

Rating: 1.1%

Hi all,

My first try at tracing a circuit and third layout.
The circuit has an input + buffered output and an xlr ofc.
Versatile as it can be powered 9-16VDC or by phantom power.

The layout is verified , as I built it a few hours ago and works perfectly !

Peavey-EDB1-schematic.png

Row H can be ommited as it is not connected to any component.

Peavey-EDB1-layout.jpg

Cheers !

0 Replies

2399 Views

View the latest post Peavey EDB1 active DI (verif …
Last post diskovolos
22 Sep 2024, 12:02

New Topic

784 topics

Page 1 of 32
- Jump to page:
1
2
3
4
5
…
32
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum