I have three clones that I'm no longer using. I scrapped the board and went back to a rack.
SHO clone works great and crackles like the real thing. Shipped and paypal'd CONUS $60
Ross Clone has input level and attack added. CA3080E chip. Great comp. Shipped and paypal'd CONUS $60
BB Pre Clone works great sounds great, just don't use it anymore. Shipped and paypal'd CONUS $60

A couple of volume pedals. Dunlop High Gain and a Rocktron HEX. Both are in good shape and work well. No scratchy...

125 for both fuzzfactories, disassembled. u put back together. these are first series, circa 04 05 ish? i bought them to mod but never got around to it. all complete except knobs. circuit boards all 100% intact, very easy assemble.
first 125 to my paypal gets em, trying to raise dough for a bulk transistor buy.

paypal,
joegagan@hotmail.com

outside US shipping very reasonable. just add $5 outside US ( 130.00 total), i will cover the diff.

Hi folks

Sorry if I post in the wrong place, I don't really know where to put this thread... moderators: feel free to move it into the right section.

I've just took some shots of this psu, as I'm always curious to see how it's made inside :D
There is a dirty factory mod in my unit, a diode ( diode number 062) was removed and replaced by a jumper which goes directly onto one pin of the DIP switch (output voltage selector).
As expected it is not military build, some cables are way too messy...

Trying to build both versions of the Quasar and I am not set up for etching at the moment. Any help/pointers are appreciated.

Hi,

Are there any other Fulltone Fulldrive 2 clones, other than the Madbean Deadringer?

Thanks,

Ian

No words necessary - but it's described as a Custom Built Feedback Looper Guitar Pedal

Gotta get me one o' dem ! :twisted:

Sound Sample:

I only sell the one in black metallic color about $100 exclude shipping.

anybody ever order from

looks like a bunch of cool deals, i just wonder about quality.

dpdt switches for .41ea, buy +10 .36ea, +100 .30
led's 100pk for 1.95

bench power supply 59.95

sounds to good to be true :horsey:

This is in near perfect condition. Runs on 240v mains.
DELAY analog generation based on Bucket brigade chips BBD MN3005 and MN3101 able to generate a time delay from 25 MS to 300 MS.
Other interesting internal chip I spotted is the JRC4558D (Operational Amplifier - first version) famous the be present on early Ibanez Tubescreamer.

INPUT LEVEL : adjust gain IN

DELAY TIME : range up to 300ms. Short are kind of cool flanging (hear the demo below). Can be made longer by adjusting-Freq response...

I've ended up with a couple really nice pedals that are probably too nice for what I do. What I'm really looking for is a good ring modulator (not a Green Ringer or Gonkulator) and some Devi Ever fuzz pedals. I don't need any bit crusher style fuzz, since I have a Robot clone and a Freakshow HiRay. Pics available by request. I would prefer to ship to the US. I will consider sale offers, but would prefer to trade.

Haves:
Bogner Ecstasy Blue (Mint with box)
DMB Pedals Stellar Drive (Mint with...

Hello
My name is Nicholas

Im curently selling a Univox Super-Fuzz clone on ebay
The pedal is built to the original specs.
1590BB enclosure,Alpha pots,Alpha switch,3PDT footswitch,9V power jack,germanium diodes.

Check the video on youtube where I recorded the sound of my previous built,exactly the same components and PCB.

Hi to all, I'm looking for some 125'b painted enclosures, but the only stores I've found are in USA (like Pedal Parts Plus)...

There's a EU alternative? :popcorn:

Hi guys,

The recording studio I am based at has some NOS valves for sale on ebay. It includes some ECC82s and EF86. It might be worth your while taking a look. You can see them at

Cheers,

ross_delay1.jpg
This is the 4 knob yellow box, mains powered analogue delay-famous for its crisp, long analogue delays
Stopped gigging now-so this is up for grabs.
Fully working, no scratchy pots/jacks
£95 seems a fair price-postage £5 extra for UK deliveries
I am UK based

Anyone got something to swap for an original Hot Cake? I'm after something different but in a similar vein...OCD, Plexi-drive...crunchy, amp-like distortion. The Hot Cake isn't quite suited to my needs at this time.

P/X considered. I'm in the UK but would consider overseas exchanges too for the right thing.

Very similay to the MN3008-TDA2108 1 x 2048 cells, P-channel MOSFET tetrode, -18 V supply voltage, symmetrical clock 100 kHz, 12 kHz bandwidth, 1.5 V maximum signal, 78 dB signal / noise ratio, distortion 0.5%, 1,400 pF clock tax, special DIL-16, Philips.
Have 4 of these-Wanted $25 each-free world shipping

Cheers all

no word on pricing, but clonesville... marshall and simpsons artwork on the pedals is a bit of a concern...

:popcorn:

This Rockman Sustainor is one of the newer better sounding one. It performs flawlessly and has been in my own personal collection for 12 years. I found it at the dusty shelf in the back of the local music store. Instant Boston or “ZZ - Rough Boys” tone on tap. Sounds really good through an amp input or recorded direct. Add chorus and delay and you can recreate any Boston song.

The flaws are that the faceplate is bent slightly. There is only one intact screw holding the front plate on, but it...

Soviet Vintage Custom Distortion Pedal

I am offering for sale this unique soviet vintage distortion pedal. The one and only model made in late 80s by soviet engineer Sergey Bogucharov as a custom prototype for its future mass production on Formanta Radio Factory (famous for its Polivoks synthesizer & Lider guitar processors). The project was never released due to fall of the USSR & suspension of factory productions.

The only one item! Pedal has fat original not-like-others sound!

In...

Hey Just saw this. This is a pretty ambitious Kick-starter program but figured it should be viewed here so I post it.. I have no involvement with it..

A

Suhr Riot clone pedal (black). Madbean layout with jymaze modifications. $75 shipped and Paypal'd.
BB Preamp clone pedal (purple). Madbean layout. $75 shipped and Paypal'd.

Both are in great shape and perfect working order. They sound great. I am selling because I have gone back to a rack setup and have gotten rid of the pedal board.

Hi all
Ive stopped gigging now-so am selling some stuff that is duplicated/surplus to requirements.
This is one of my 2 Mu-Trons. It has quite a few paint scratches, butis fully functional. Used for about 10 years on the road-built like the proverbial BSH. No faults, dodgy switches or crackly jacks.
I have removed the Euro plug and have replced with UK plug. All works on 220/240 volt perfectly.

£175-OPEN TO OFFERS, POSTAGE £8 uk
OVERSEAS BUYERS, PLEASE CONTACT ME

Just discovered that one

Here in Poland it's www.conrad.pl in Germany www.conrad.de

AFAIK they're in other countries too

Check em out