Hello,

I've bought 10 pack of 1s2473 diodes from hon kong. How can I check if the diodes are authentic or fake?

Thanks.

Got a box of NOS RCA NPN Germanium transistors. In the original box and only missing 3. No tarnishing at all. Like new. Most of these measure between 75-100 HFE. $250 OBO, Paypal only

Anyone have a recommendation for a 4 wire connector set used to link a footswitch pcb to the main pcb? Typically I have seen one mounted on the main pcb & the other used on 4 wires coming from the footswitch pcb. Part numbers & vendor would be appreciated.

anyone got a line on any wedge shaped/slanted/sloped enclosures?(short in front, tall in back). it seems they're rather hard to come by these days. :cheers

many PCB and Kits in stock. Fuzz Factory $10 , Ibanez Standard Fuzz $5 , MXR Distortion Plus $5 , DeviEver Legend of Fuzz aka The Bit $5 , Mellowtone Wolf Computer $5 , Splitter Blend $5 .Everything I make has extra features added to the original circuit. I provide the PCB and instructions to build these projects to exact clone specs or a modern version with many improvements.

parts kits, germanium transistors, new or drilled enclosures, footswitches, jacks, pots, LED are all in stock for...

Hello everyone,

Long time lurker, first time poster!
It seems this time that searching here or on the Net doesn't yield results.

I lent my Boss OD-3 to a friend, only to get it back with a broken DC jack!
Thing is, this one seems to have a unusual barrel jack connector. It has 5 solder terminals with what looks like two different (+) contacts going to different parts of the pcb.
Does anyone know where I could order a replacement? I couldn't find it anywhere. Maybe I don't know where to...

Anyone familiar with an NPN SMD transistor with the marking 1RM ?

I'll ship a free PCB to whoever identifies it first. ;D

EDIT: Identified, thanks!

transistor.jpg

Hi!

I've searched till blue in the face, can anyone help be locate a source for those tiny compact 1/4 mono jacks? Enclosed prefered.
Many thanks!
- Dave

Hi fellas, I have pcb clearance..

I am offering :

Warhead (VH4 Diezel) 8$ (2 left) I omitted 12v regulator from power input. Also you can find some oscillations on gain settings between 7-10, but when you put buffer in front everything is silent.
Build docs

Arburat (Wampler faux echo) with adaptation for Taprecise from Marshall Arts 7$ (9 left)
Build docs

Plexi Drive 1590a SMD with fet switching 5$ (5 left)
Build docs to come..

VoodooVibe pcb - 15$ (6 left)
Build docs
Build Report...

I know there's plenty of info on this dotted around the various forums, but it would be really nice to have a list of recommended list of PCB fabrication houses. Parts Sourcing & Trading seems as good a home as any.

I'm considering a few at the minute for a first order - it'd be great if others could chip in with their experiences. So far I've considered:

- UK based. Helpful and quick response. Quoted prices really quite good for a domestic fab house.
- Another UK house. Nice online...

Hi folks, I am looking for a rubber pedal insert for the FCB1010 - as circled in the photo below.
Will pay postage from anywhere in the world.
Thanks!

I have 5 Harvey Dent Fuzz PCB's for sale. These are clone boards of the (in)famous Schumann Two Face Fuzz. Some pics...

A completed build, for reference only. Sale is for PCB's only;

For the record, there are a couple of little niggles with this v.1 run, but they are minor, and easily correctable. The fixes, as well as all the required build info can be downloaded from here, if you wish to look over the document before you buy;

Boards are $20 US each, shipping included to...

What parts suppliers carry the brown tagboard as used by D*A*M? I'm having trouble tracking it down

Hi
I wanted to ask for info on building a clone of prescription electronics clean octave blend pedal.
What type of capacitors are used in the original circuit?
From the pictures I can see that p.e. had used green mylar and also blue type.
There is a clear capsule with a tin foil inside it. What type is that?
What type of capacitors are used?
Thank you
Howard

In many stores it is easy to find smd resistors, ceramic capacitors, electrolytes, tantalum, diodes, microcircuits and so on.
BUT I can not find film capacitors smd anywhere, do they exist at all?
If so, where can I buy them?

Hi boards members,

May i know where else i can order 9mm alpha right angle pot except ppp and small bear?

I have Joyo Sweet Baby which I finally modded to my liking (added a 1meg pot for the gain and changed the smd chip to OP275). As soon as I had this thing dang-near perfect...the footswitch falls apart!

I ordered the new footswitch (Alpha), but I am very leary of delsoldering components on these joyo pedals and these switches are pcb mounted. I've had a few solder pads practically disinegrate while trying. I do have a solder sucker I plan on using...can can anyone share any experiences, tips...

Not really after parts as such... But has anyone got a PCB trace of an early Vox v847 wah PCB?

I want to make one, and can't find a printable trace anywhere on the net. Alternatively some good photos will do so I can copy the layout in Eagle.

I know Pigeon FX do one but I can't seem to get hold of Brook to ask him...... also not sure if he only sells pre-formatted boards.

Hey there boys and girls.... First post on here but there will be more to come. Thought I would pass along a great deal on eBay.... It's a grab bag of NOS Thomson box film capacitors. Some of the cash goes to charity too so it's a win win for everybody. The guy selling them is a scholar and gentleman to boot. He sent me a sample of about 50 silver micas when I ordered 5 bags. I'm not saying he will do this for every order though. 5 bags for 20 bucks and I got over 550 caps!!! Most of them are...

I was wondering if anyone has seen any diodes with the attached logo and was able to decipher the manufacturer

I've been out of the loop since the late 80's on this stuff, I'm having a hard time sourcing parts. Can a TL072 work as a direct substitute for a TL071? Failing that, does anyone know where I can order either one, preferably from a North American supplier(I live in Canada). As I gradually re-enter the DIY world I'm really amazed at how hard it is to find parts locally, and in some cases mail order. My current project is the simple buffer posted here, I want to see if I can work it into a multi...

Hello,

I can't seem to find any High Pass filter chip.
There are thousands of high order low pass IC's but I cannot get my hands on a single high pass on.
Is there a specific reason for this ?

FWIW I'm looking for a HP equivalent of a MAX291 or similar

I have a bunch of extra pots I am selling on eBay. Sold in bulk, with per pot pricing between $0.10 and $0.20. I paid 40 cents for the single gang pots, and a dollar per dual-gang, so these prices are BIG discounts. I don't need them anymore, so I'm clearing out my remaining inventory.